IEI Integration AFL-W19A, AFL-W19B-17D, AFL-W15A-GM45 User Manual
IEI Technology Corp.
User Manual
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
MODEL:
AFL-W19A/W19B/17D/W15A-GM45
Panel PC with Touch Screen Intel® CPU
Gigabit Ethernet, USB, Audio, RS-232/422/485, SATA
RoHS Compliant, IP 64 Protection
Rev. 2.20 – 22 February, 2012
Page i
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Revision
Date Version Changes
22 February, 2012 2.20 Updated for R22 version (Bluetooth function optional)
Updated Appendix C: One Key Recovery
25 July, 2011 2.10 Updated for R21 version (change wireless module)
17 June, 2011 1.05 Added battery disposal warning message in Appendix A
Added One Key Recovery as Appendix C
31 August, 2010 1.04 Added J6 jumper settings
10 November, 2009 1.03 Updated I/O diagrams
26 May, 2009 1.02 Minor updates
8 April, 2009 1.01 Added 15"
18 March, 2009 1.00 Initial release
Page ii
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
Copyright
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page iii
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 3
1.3 FEATURES................................................................................................................... 3
1.4 EXTERNAL OVERVIEW................................................................................................ 3
1.4.1 Front Panel........................................................................................................ 3
1.4.2 Rear Panel ......................................................................................................... 4
1.4.3 Bottom Panel...................................................................................................... 5
1.5 INTERNAL OVERVIEW................................................................................................. 5
1.6 SPECIFICATIONS ......................................................................................................... 5
1.7 DIMENSIONS............................................................................................................... 7
1.7.1 AFL-W15A-GM45 Dimensions.......................................................................... 7
1.7.2 AFL-17D-GM45 Dimensions............................................................................. 8
1.7.3 AFL-W19A-GM45 Dimensions.......................................................................... 9
1.7.4 AFL-W19B-GM45 Dimensions........................................................................ 10
2 INSTALLATION ..........................................................................................................11
2.1 UNPACK THE PANEL PC............................................................................................ 12
2.2 PACKING LIST........................................................................................................... 13
2.3 HARD DRIVE INSTALLATION..................................................................................... 14
2.4 COMPACTFLASH® INSTALLATION............................................................................ 17
2.5 JUMPER SETTINGS .................................................................................................... 18
2.5.1 COM1 Pin-9 Setup........................................................................................... 18
2.5.2 COM3 Pin-9 Setup........................................................................................... 19
2.5.3 COM3 RS-232/422/485 Setup.......................................................................... 20
2.5.4 COM3 422/485 Setup....................................................................................... 21
2.6 MOUNTING THE SYSTEM .......................................................................................... 21
2.7 BOTTOM PANEL CONNECTORS ................................................................................. 22
2.7.1 LAN Connection............................................................................................... 22
2.7.2 Serial Device Connection ................................................................................ 23
2.7.3 USB Device Connection................................................................................... 24
Page iv
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
2.7.4 VGA Monitor Connection ................................................................................ 25
2.8 POWER CONNECTION ............................................................................................... 26
2.9 DRIVER INSTALLATION............................................................................................. 26
3 BIOS..............................................................................................................................28
3.1 INTRODUCTION......................................................................................................... 29
3.1.1 Starting Setup................................................................................................... 29
3.1.2 Using Setup...................................................................................................... 29
3.1.3 Getting Help..................................................................................................... 30
3.1.4 Unable to Reboot After Configuration Changes.............................................. 30
3.1.5 BIOS Menu Bar................................................................................................ 30
3.2 MAIN........................................................................................................................ 31
3.3 ADVANCED...............................................................................................................32
3.3.1 CPU Configuration.......................................................................................... 33
3.3.2 IDE Configuration........................................................................................... 34
3.3.2.1 IDE Master, IDE Slave............................................................................. 35
3.3.3 Hardware Health Configuration...................................................................... 40
3.3.4 AHCI Configuration......................................................................................... 43
3.3.4.1 AHCI Port n.............................................................................................. 44
3.3.5 Remote Access Configuration.......................................................................... 45
3.3.6 USB Configuration........................................................................................... 49
3.3.6.1 USB Mass Storage Device Configuration................................................. 51
3.3.7 Power Configuration ....................................................................................... 53
3.3.7.1 ACPI Settings............................................................................................ 54
3.3.8 Super IO Configuration ................................................................................... 55
3.4 PCI/PNP................................................................................................................... 57
3.5 BOOT........................................................................................................................ 60
3.5.1 Boot Settings Configuration............................................................................. 60
3.5.2 Boot Device Priority........................................................................................ 65
3.5.3 Hard Disk Drives............................................................................................. 66
3.5.4 Removable Drives............................................................................................ 66
3.5.5 CD/DVD Drives............................................................................................... 67
3.6 SECURITY................................................................................................................. 68
3.7 CHIPSET ................................................................................................................... 69
3.7.1 Northbridge Configuration.............................................................................. 70
Page v
3.7.2 Southbridge Configuration .............................................................................. 72
3.8 EXIT......................................................................................................................... 73
4 SYSTEM MAINTENANCE ....................................................................................... 75
4.1 SYSTEM MAINTENANCE INTRODUCTION .................................................................. 76
4.2 MOTHERBOARD REPLACEMENT ............................................................................... 76
4.3 COVER REMOVAL ..................................................................................................... 76
4.4 MEMORY MODULE REPLACEMENT........................................................................... 77
A SAFETY PRECAUTIONS......................................................................................... 79
A.1 SAFETY PRECAUTIONS ............................................................................................ 80
A.1.1 General Safety Precautions............................................................................. 80
A.1.2 Anti-static Precautions.................................................................................... 81
A.1.3 Product Disposal............................................................................................. 82
A.2 MAINTENANCE AND CLEANING PRECAUTIONS........................................................ 82
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
A.2.1 Maintenance and Cleaning.............................................................................. 82
A.2.2 Cleaning Tools................................................................................................. 83
B BIOS OPTIONS .......................................................................................................... 84
C ONE KEY RECOVERY............................................................................................. 88
C.1 ONE KEY RECOVERY INTRODUCTION ...................................................................... 89
C.1.1 System Requirement ........................................................................................ 90
C.1.2 Supported Operating System........................................................................... 91
C.2 SETUP PROCEDURE FOR WINDOWS.......................................................................... 92
C.2.1 Hardware and BIOS Setup .............................................................................. 93
C.2.2 Create Partitions............................................................................................. 93
C.2.3 Install Operating System, Drivers and Applications....................................... 97
C.2.4 Build-up Recovery Partition............................................................................ 98
C.2.5 Create Factory Default Image ...................................................................... 100
C.3 AUTO RECOVERY SETUP PROCEDURE.................................................................... 105
C.4 SETUP PROCEDURE FOR LINUX...............................................................................110
C.5 RECOVERY TOOL FUNCTIONS .................................................................................113
C.5.1 Factory Restore..............................................................................................115
C.5.2 Backup System................................................................................................116
C.5.3 Restore Your Last Backup...............................................................................117
Page vi
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
C.5.4 Manual ...........................................................................................................118
C.6 RESTORE SYSTEMS FROM A LINUX SERVER THROUGH LAN...................................119
C.6.1 Configure DHCP Server Settings.................................................................. 120
C.6.2 Configure TFTP Settings............................................................................... 121
C.6.3 Configure One Key Recovery Server Settings............................................... 122
C.6.4 Start the DHCP, TFTP and HTTP................................................................. 123
C.6.5 Create Shared Directory................................................................................ 123
C.6.6 Setup a Client System for Auto Recovery...................................................... 124
C.7 OTHER INFORMATIO N ............................................................................................ 127
C.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller ...................... 127
C.7.2 System Memory Requirement........................................................................ 129
D TERMINOLOGY ..................................................................................................... 130
E WATCHDOG TIMER............................................................................................... 134
F HAZARDOUS MATERIALS DISCLOSURE........................................................ 137
F.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 138
Page vii
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
List of Figures
Figure 1-1: AFL-W19A/W19B/17D/W15A-GM45...........................................................................2
Figure 1-2: Front Panel ..................................................................................................................4
Figure 1-3: Rear Panel....................................................................................................................4
Figure 1-4: Bottom Panel...............................................................................................................5
Figure 1-5: AFL-W15A-GM45 Dimensions (units in mm)............................................................7
Figure 1-6: AFL-17D-GM45 Dimensions (units in mm)...............................................................8
Figure 1-7: AFL-W19A-GM45 Dimensions (units in mm)............................................................9
Figure 1-8: AFL-W19B-GM45 Dimensions (units in mm)..........................................................10
Figure 2-1: Aluminum Back Cover Retention Screws ..............................................................15
Figure 2-2: HDD Bracket Retention Screws...............................................................................15
Figure 2-3: HDD Retention Screws.............................................................................................16
Figure 2–4: HDD Installation........................................................................................................16
Figure 2–5: Remove CompactFlash® Cover..............................................................................17
Figure 2–6: CompactFlash® Install.............................................................................................18
Figure 2-7: Connectors ................................................................................................................22
Figure 2-8: LAN Connection........................................................................................................23
Figure 2-9: Serial Device Connector...........................................................................................24
Figure 2-10: USB Device Connection.........................................................................................25
Figure 2-11: VGA Connector .......................................................................................................26
Figure 4-1: Back Cover Retention Screws.................................................................................77
Figure 4-2: DDR SO-DIMM Module Installation..........................................................................78
Figure C-1: IEI One Key Recovery Tool Menu...........................................................................89
Figure C-2: Launching the Recovery Tool.................................................................................94
Figure C-3: Recovery Tool Setup Menu .....................................................................................94
Figure C-4: Command Mode........................................................................................................95
Figure C-5: Partition Creation Commands.................................................................................96
Figure C-6: Launching the Recovery Tool.................................................................................98
Figure C-7: Manual Recovery Environment for Windows........................................................98
Figure C-8: Building the Recovery Partition..............................................................................99
Figure C-9: Press Any Key to Continue.....................................................................................99
Page viii
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Figure C-10: Press F3 to Boot into Recovery Mode............................................................... 100
Figure C-11: Recovery Tool Menu ........................................................................................... 100
Figure C-12: About Symantec Ghost Window........................................................................ 101
Figure C-13: Symantec Ghost Path ......................................................................................... 101
Figure C-14: Select a Local Source Drive ............................................................................... 102
Figure C-15: Select a Source Partition from Basic Drive ...................................................... 102
Figure C-16: File Name to Copy Image to ............................................................................... 103
Figure C-17: Compress Image.................................................................................................. 103
Figure C-18: Image Creation Confirmation............................................................................. 104
Figure C-19: Image Creation Complete................................................................................... 104
Figure C-20: Image Creation Complete................................................................................... 104
Figure C-21: Press Any Key to Continue................................................................................ 105
Figure C-22: Auto Recovery Utility.......................................................................................... 106
Figure C-23: Disable Automatically Restart............................................................................ 106
Figure C-24: Launching the Recovery Tool............................................................................ 107
Figure C-25: Auto Recovery Environment for Windows ....................................................... 107
Figure C-26: Building the Auto Recovery Partition................................................................ 108
Figure C-27: Factory Default Image Confirmation ................................................................. 108
Figure C-28: Image Creation Complete................................................................................... 109
Figure C-29: Press any key to continue.................................................................................. 109
Figure C-30: Partitions for Linux.............................................................................................. 111
Figure C-31: System Configuration for Linux......................................................................... 112
Figure C-32: Access menu.lst in Linux (Text Mode).............................................................. 112
Figure C-33: Recovery Tool Menu ........................................................................................... 113
Figure C-34: Recovery Tool Main Menu.................................................................................. 114
Figure C-35: Restore Factory Default...................................................................................... 115
Figure C-36: Recovery Complete Window.............................................................................. 115
Figure C-37: Backup System.................................................................................................... 116
Figure C-38: System Backup Complete Window ................................................................... 116
Figure C-39: Restore Backup................................................................................................... 117
Figure C-40: Restore System Backup Complete Window..................................................... 117
Figure C-41: Symantec Ghost Window ................................................................................... 118
Figure C-42: Disable Automatically Restart............................................................................ 125
Page ix
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
List of Tables
Table 1-1: System Specifications..................................................................................................6
Table 2-1: Packing List.................................................................................................................14
Table 2-2: COM1 Pin-9 Setup.......................................................................................................19
Table 2-3: COM1 Pinouts .............................................................................................................19
Table 2-4: COM3 Pin-9 Setup.......................................................................................................20
Table 2-5: COM3 RS-232/422/485 Setup.....................................................................................20
Table 2-6: COM3 RS-232/422/485 Setup.....................................................................................20
Table 2-7: COM3 Pinouts .............................................................................................................21
Table 2-8: COM3 422/485 Setup ..................................................................................................21
Table 3-1: BIOS Navigation Keys................................................................................................30
Page x
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................31
BIOS Menu 2: Advanced..............................................................................................................32
BIOS Menu 3: CPU Configuration...............................................................................................33
BIOS Menu 4: IDE Configuration.................................................................................................34
BIOS Menu 5: IDE Master and IDE Slave Configuration...........................................................35
BIOS Menu 6: Hardware Health Configuration..........................................................................40
BIOS Menu 7: AHCI Configuration..............................................................................................43
BIOS Menu 8: AHCI Port n Configuration Menu........................................................................44
BIOS Menu 9: Remote Access Configuration............................................................................45
BIOS Menu 10: USB Configuration.............................................................................................49
BIOS Menu 11: USB Mass Storage Device Configuration........................................................51
BIOS Menu 12: APM Configuration.............................................................................................53
BIOS Menu 13: ACPI Settings .....................................................................................................54
BIOS Menu 14: Super IO Configuration......................................................................................55
BIOS Menu 15: PCI/PnP Configuration.......................................................................................58
BIOS Menu 16: Boot.....................................................................................................................60
BIOS Menu 17: Boot Settings Configuration.............................................................................60
BIOS Menu 18: Boot Device Priority Settings ...........................................................................65
BIOS Menu 19: Hard Disk Drives ................................................................................................66
BIOS Menu 20: Removable Drives..............................................................................................66
BIOS Menu 21: CD/DVD Drives ...................................................................................................67
BIOS Menu 22: Security...............................................................................................................68
BIOS Menu 23: Chipset................................................................................................................69
BIOS Menu 24:Northbridge Chipset Configuration...................................................................70
BIOS Menu 25:Southbridge Chipset Configuration..................................................................72
BIOS Menu 26:Exit........................................................................................................................73
BIOS Menu 27: IEI Feature........................................................................................................ 110
Page xi
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
1 Introduction
Chapter
1
Page 1
1.1 Overview
Figure 1-1: AFL-W19A/W19B/17D/W15A-GM45
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
The Afolux panel PCs are all-in-one panel PCs with all the elements of a desktop
computer contained in a single, slim package, no bigger than a thick monitor. The Afolux
panel PCs can be mounted on a desktop monitor stand and save a huge amount of
desktop space by including all the computer components behind the screen. All models
include a touch screen interface.
The Afolux is a self-contained system, with all parts, excluding the power supply,
contained inside the casing allowing a completely interactive panel PC with only a single
power cable. Network access is enabled through a 802.11b/g/n wireless adapter. Wired
options are always available on the rear panel, with two serial ports and four USB ports for
peripherals and two Gigabit Ethernet slots for networking.
The Afolux includes both audio and visual multimedia capabilities. All models have a VGA
output for connecting another monitor to the system, and audio outputs for external audio.
There is also a built-in 300 K webcam and a microphone input jack.
Page 2
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
1.2 Model Variations
The AFL-17D-GM45 and AFL-W19B-GM45 also support a built-in slim-type SATA optical
disk drive.
1.3 Features
Some of the standard features of the AFL-W19A/W19B/17D/W15A-GM45 flat panel PC
include:
Fully self-contained, only power from the external power supply required
Touch screen
Wireless LAN
Gigabit Ethernet
Bluetooth (optional)
IP64 protection
RoHS compliant
1.4 External Overview
The AFL-W19A/W19B/17D/W15A-GM45 consists of a screen and rear panel that covers
the back, sides and top. The rear panel contains a smaller access panel, all the cable
connections and the mounting holes.
1.4.1 Front Panel
The front side of the AFL-W19A/W19B/17D/W15A-GM45 is a flat panel LCD screen
surrounded by a plastic frame.
Page 3
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Figure 1-2: Front Panel
1.4.2 Rear Panel
The rear panel provides access to retention screw holes that support the wall mounting.
Refer to
5Figure 1-3.
Page 4
Figure 1-3: Rear Panel
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
1.4.3 Bottom Panel
The bottom panel has the following slots, buttons and switches (5Figure 1-4):
2 x Gigabit LAN
1 x Line output (audio)
1 x OSD keypad
1 x Power switch
1 x Power input (12 V)
1 x Reset button
1 x RS-232
1 x RS-232/422/485
4 x USB ports
1 x VGA port
Figure 1-4: Bottom Panel
1.5 Internal Overview
All the components are contained under the rear panel. The internal components include
the touch panel module and the motherboard. The motherboard has memory, a wireless
module and a hard drive. Optionally, an HSDPA module can be installed in any of the
models. The AFL-W19B-GM45 also supports an optical disk drive.
1.6 Specifications
The technical specifications for the AFL-W19A/W19B/17D/W15A-GM45 systems are
listed in
5Table 1-1.
Page 5
SPECIFICATION AFL-W15A-GM45 AFL-17D-GM45 AFL-W19A-GM45 AFL-W19B-GM45
Mainboard AFLMB2-GM45
CPU 2.0 GHz Intel® Celeron® M 575
2.2 GHz Intel® Core™2 Duo T7500
LCD Panel 15.6" 17" 19" 19"
Resolution 1366 x 768 1280 x 1024 1440 x 900 1440 x 900
Brightness 250 300 300 300
Contrast Ratio 500:1 800:1 850:1 850:1
LCD Colors 16.2 million 16.7 million 16.2 million 16.2 million
Pixel Pitch 0.252 x 0.252 0.264 x 0.264 0.285 x 0.285 0.285 x 0.285
Viewing Angle (H/V) 170/130 160/160 160/160 160/160
Backlight MTBF 50000 50000 50000 50000
Touch Screen 5-wire resistive touch panel
Wireless 802.11b/g/n
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
IP Level IP 64 front panel
I/O 2 x Gigabit LAN
1 x Line output (audio)
1 x Power input (12 V)
1 x RS-232
1 x RS-232/422/485
4 x USB ports
1 x VGA port
Power Adapter 100-240 VAC input, 12 V output
Mounting Feature VESA 100x100
Operating Temp. 0ºC ~ 40ºC
Dimension (WxHxD) 400 x 273 x 62.9 410 x 349 x 83 475 x 332 x 65 475 x 332 x 84
Net/Gross Weight 3.3 kg 6.2 kg 5.8 kg 6.2 kg
Front Panel
Protection
EMC and Safety CE, FCC, CB, CCC
IP 64 compliant
Table 1-1: System Specifications
Page 6
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
1.7 Dimensions
1.7.1 AFL-W15A-GM45 Dimensions
Figure 1-5: AFL-W15A-GM45 Dimensions (units in mm)
Page 7
1.7.2 AFL-17D-GM45 Dimensions
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 8
Figure 1-6: AFL-17D-GM45 Dimensions (units in mm)
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
1.7.3 AFL-W19A-GM45 Dimensions
Figure 1-7: AFL-W19A-GM45 Dimensions (units in mm)
Page 9
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
1.7.4 AFL-W19B-GM45 Dimensions
Page 10
Figure 1-8: AFL-W19B-GM45 Dimensions (units in mm)
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
2 Installation
Chapter
2
Page 11
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
WARNING:
When installing the AFL-W19A/W19B/17D/W15A-GM45, make sure to:
Turn the power off: Chance of electrocution. Turn off the monitor
and unplug it from the power supply.
Only let certified engineers change the hardware settings:
Incorrect settings can cause irreparable damage to the product.
Install the monitor with assistan ce: The product is very heavy and
may be damaged by drops and bumps. Two or more people should
install the panel PC.
Take anti-static precautions: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the flat panel PC
Step 2: Check all the required parts are included
Step 3: Install the hard drive
Step 4: Install the CompactFlash® card
Step 5: Mount the flat panel PC
Step 6: Connect peripheral devices to the bottom panel of the flat panel PC
Step 7: Connect the power cable
Step 8: Configure the system Step 0:
2.1 Unpack the Panel PC
To unpack the flat panel PC, follow the steps below:
Page 12
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box. Step 0:
2.2 Packing List
The AFL-W19A/W19B/17D/W15A-GM45 flat panel PC is shipped with the following
components:
Quantity Item Image
1 AFL-W19A/W19B/17D/W15A-GM45
1 Power adapter
1 Power cord
1 Screw set
Page 13
Quantity Item Image
1 Touch screen pen
1 Utility CD
Table 2-1: Packing List
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
2.3 Hard Drive Installation
This section outlines the installation of the hard drive in the
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
AFL-W19A/W19B/17D/W15A-GM45. To install the hard drive, please follow the steps
below:
Step 1: Remove the plastic back cover.
Step 2: Unfasten the four silver retention screws. The screws will not separate from the
cover, just loosen as much as possible (
5Figure 2-1).
Page 14
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Figure 2-1: Aluminum Back Cover Retention Screws
Step 3: Slide the cover down, then lift to remove.
Step 4: Remove the four HDD bracket retention screws (
brackets out of the panel PC.
5Figure 2-2) and lift the HDD
Figure 2-2: HDD Bracket Retention Screws
Page 15
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Step 5: Attach the HDD brackets to the HDD. The brackets are different for each side.
Make sure the side with the hard drive screw hole further from the end goes at
the SATA connector end as shown in
5Figure 2-3.
Figure 2-3: HDD Retention Screws
Step 6: Install the hard drive in the same position it was before.
Step 7: Slide down from the top to connect the motherboard SATA connector to the hard
drive SATA connector.
Page 16
Figure 2–4: HDD Installation
Step 8: Fasten the screws.
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Step 9: A CompactFlash® card can also be installed in the CompactFlash® slot shown
5Figure 2–4 above.
in
2.4 CompactFlash® Installation
The installation for the AFL-17D-GM45 is shown in this section. The CompactFlash® card
installation for the AFL-W19A-GM45 and AFL-W19B-GM45 is shown in the hard drive
installation section above.
Step 1: Undo the CompactFlash® slot screw.
Step 2: Slide the cover upwards to remove.
Figure 2–5: Remove CompactFlash® Cover
Step 3: Install the CompactFlash® in the slot inside.
Page 17
Figure 2–6: CompactFlash® Install
Step 4: Slide the cover back on, then fasten the screw.Step 0:
2.5 Jumper Settings
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
NOTE:
A jumper is a metal bridge that is used to close an electrical circuit. It
consists of two metal pins and a small metal clip (often protected by a
plastic cover) that slides over the pins to connect them. To
CLOSE/SHORT a jumper means connecting the pins of the jumper
with the plastic clip and to OPEN a jumper means removing the plastic
clip from a jumper.
The motherboard jumpers are listed below.
COM1 pin 9 setup
COM3 pin 9 setup
COM3 RS-232/422/485 selection
2.5.1 COM1 Pin-9 Setup
Page 18
Jumper Label: JP11
Jumper Type:
10-pin header
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
See
Jumper Settings:
5Table 2-2
The pin-9 signal can be selected as 12 V, 5 V or Ring.
Pin Description
1-3 12 V
3-5 5 V
7-9 RI
Table 2-2: COM1 Pin-9 Setup
The pinouts for the COM1 connector are shown below.
Pin Description
1 DCD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Table 2-3: COM1 Pinouts
2.5.2 COM3 Pin-9 Setup
Jumper Label: J5
Jumper Type:
Jumper Settings:
The pin-9 signal can be selected as 12 V, 5 V or Ring.
10-pin header
5Table 2-4
See
Pin Description
1-2 12 V
3-4 RI
Page 19
Loading...