IDX Technology P-V284 Data Sheet

P-V212, P-V257 and P-V284

ENDURA V-Mount Plate with 2 Pin D-Tap DC Out & Digi-View

Expanding on the success of the V-Plate product line, IDX has added
three (3) mounts to the series. Made specifically to address many of the
major manufacturers’ camera systems with smaller profiles, this plate
group was developed for mating IDX’s ENDURA V-Mount Lithium Ion
batteries to a wide variety of handheld cameras that do not have a
V-Mount style battery lock as standard.
Dual D-Tap power connections provide flexibility in a plug-and-play for­mat—when powered with an IDX ENDURA battery, one D-Tap outputs
converted voltage from the 12V IDX source to a regulated output of

5.3V, 7.3V, 8.4V or 12V, depending on the V-Plate selected.
The second D-Tap is a battery-based throughput of 50W maximum
output for a camera’s ancillary gear such as an on-board light.

 P-V212 includes dual D-taps–one for regulated 12VDC output,

and the other for unregulated battery throughput (50W max).

 P-V257 converts 12V to 5V/7.3V and has dual 2-Pin D-Taps; one

for regulated 5V/7.3V [switchable], the other for unregulated
battery throughput (50W max). For Panasonic AG-AF100, please
call IDX Sales Department for details on V-Plate set-up.

 P-V284 features dual 2-Pin D-taps– one regulated for 8.4V; the

second for unregulated battery throughput for optional

 accessory power (50W max).

P-V212, P-V257, P-V284 Product Features:

 V-Mount connection for precise DC power connectivity and much

longer running times for small profile cameras using IDX ENDURA
series batteries (E-7, E-7S, E-HL9, E-10 Series & ELITE).

 Remaining battery capacity can be displayed in the camera’s view-

finder for confidence monitoring (feature available on camera sys­tems capable of displaying DigiView).

 P-V212, P-V257 & P-V284 can be mounted onto the A-MWR wire-

less audio adaptor; all three V-Plates are also compatible with
IDX’s shoulder mount system A-CA74E.

 Optional DC-powered camera input cables mate with a specific

V-Plate, providing appropriate voltage for these pro cameras ­ P-V257 combines with cable:
C-EOSC - use with Canon EOS Series 7D/5D Mark II
C-JVCC - use with JVC GY-HM Series
C-PANAVC - use with Panasonic HMC Series & AG-AF100
C-PANCP2 - use with Panasonic HPX, HVX Series
C-CANC - use with Canon XL, XH Series
P-V212 combines with cable:
C-PIN - use with Sony PMW-EX1/EX3 Series
P-V284 combines with cable:

C-SONC - use with Sony HVR Series

Note: Cables must be used in combination with appropriate plate for
voltage conversion; the cables do not provide regulated power.

Side view of P-V257:

D-Tap connector outputs 5V
or 7.3V (regulated)

Power output selection switch
with a choice of 5V or 7.3V

Technical Specification

D-Tap Power Out (Primary):

P-V212: 12V Regulated
P-V257: 5V/7.3V Regulated
P-V284: 8.4V Regulated

D-Tap Power Out (Secondary):

50W Maximum (on-board lights, etc.)
(Unregulated)

Dimensions:

3.25 (W) x 5.59 (H) x 0.47 (D) inches

Weight:

0.40 lbs. approx. (plate series)

IDX reserves the right to change
specifications contained herein without
notice.

IDX System Technology, Inc.
19001 Harborgate Way, Suite 105
Torrance, CA 90501
U.S.A.
Telephone: [phone]
Fax: [phone]

For further information, email us: [e-mail] or visit our website www.idxtek.com
IDX reserves the right to change the specifications contained herein without notice.