IDX Technology A-E2LCD-2 User Manual

Product Guidelines
Title: Monitor Mount A-E2LCD-2 Compatibility
Release Date: 3/1/10

A-E2LCD-2 with rugged handle & hardwire connector

The A-E2LCD-2 battery adaptor can be
mounted on all VESA 100 compliant LCD
monitors.
VESA 100 compliant products are
equipped with a 100 x 100 mm mounting
screw pattern in a physical plate configu­ration similar to the dimensional example
below in Figure 1.
Please note the A-E2LCD-2 is not com­patible with VESA 75 and VESA 200 size
mounting patterns.

This mount provides DC current directly
from the battery to the 4-pin XLR connec­tor (female). The A-E2LCD-2 works with
video monitors and other equipment that
handles a voltage range from 11—17V.

Figure 1: VESA 100 Mount Dimensions

Height and Width of plate:

100 mm or approx. 4” Wide

A-E2LDC-2 Installation

Note: Please confirm if your LCD monitor provides VESA 100 mounting capability on
the respective product specification sheet.

IDX System Technology, Inc.
19001 Harborgate Way, Suite 105
Torrance, CA 90501
U.S.A.
Telephone: [phone]
Fax: [phone]

For further information, email us: [e-mail] or visit our website www.idxtek.com
IDX reserves the right to change the specifications contained herein without notice.