IDX SD-1E User Manual

Revised：2004.08.24

SD-1E

ENDURA POWER BELT /

SPECIFICATIONS

 DC output : 1 channel (4 pin XLB2 connector)

 Output voltage : 12~14.4V Pin No’s : 1 minus / 4 plus

 Discharge current : 12~14.4V Maximum 6.5A

7.2V Maximum 2A

 Number of batteries to be used : Maximum 2 (2 in PowerLink mode)
 Dimensions : 67.5(W) x 106(H) x 34.5(D) mm approx

 Weight : Approx. 0.62 lbs.

APPLICABLE BATTERIES

 E-50, E-80, E-50S, E-80S

CAUTION

In Japan/Asia

IDX COMPANY LTD.
6-28-11 Shukugawara,
Tama-ku, Kawasaki-Shi,
Kanagawa-ken 214-0021,
Japan

Sales and service

Phone [phone]
Fax [phone]
E-mail [e-mail]

 Maximum discharge current when using 7.2V output voltage is 2A.

 When powering 7.2V equipment be sure to follow XLR wiring instruction

i.e. For 7.2V Output Pin No’s : 2 = Plus & 3 = Minus

DV ADAPTOR

: 7.2V Pin No’s : 2 plus / 3 minus

: 2.66(W) x 4.17(H) x 1.36(D) inches approx

In the United States

IDX System Technology
1602 Lockness Place,
Torrance, CA 90501 USA

Sales and Service

Phone [phone]
Fax [phone]

E-mail [e-mail]

In Europe/Middle East

IDX Technology Europe Ltd.
Unit 34 Metropolitan Centre,
3 Taunton Road, Greenford,
Middlesex UB6 8UQ, England

Sales and service

Phone [phone]
Fax [phone]

E-mail [e-mail]