
Rev. 2004.04.22
WIRELESS RECEIVER BRACKET
ENDURA
A-SWR
The IDX A-SWR Wireless Receiver Adaptor is designed to attach to all new Sony V-Mount cameras. In
addition it can also be attached to any camera that can accept the Sony BKW-601 V-Mount adaptor plate.
The A-SWR is adjustable and can be used with either the ENDURA System E-80/80S or E-50/50S and can be
fully extended to accept batteries used in PowerLink.
For instructions on how to fit your A-SWR directly to a camera or via a BKW-601 follow the simple steps listed
below.
1/ Remove the two adjustable side-arms by loosening the side hand-screws
2/ Align the side-arms with the camera or BKW-601 securing points and secure using the (M2.6 L5) screws
(supplied)
3/ Reattach the rear bracket to the side-arms, align to desired length and tighten the hand-screws.
4/ The rear bracket is supplied with 4 x detachable boss’s each with an internal thread which are used if the
Wireless Receiver it to be attached via screws. If a flat surface is required simply remove the boss’s
*Sony Cameras to which the A-SWR can be fitted directly
Sony DSR Series (DVCAM)
Sony DNW Series (Betacam SX)
Sony DVW Series Digital BETACAM)
Sony MSR Series (IMX)
Sony HDW Series (HDCAM)
Sony cameras that will need the BKW-601
Sony BVW Series (Betacam SP)
Fig (1). Fitting to camera or to BKW-601 (M.2.6 x 5mm x 4 pcs) Fig (2). Hand-screws
Adjust the depth of the bracket to one of
the 4 settings to suit the batteries used.
IDX Technology
In Japan/Asia In the United States In Europe/Middle East
IDX COMPANY LTD IDX System Technology IDX Technology Europe Ltd.
6-28-11 Shukugawara, Tama-ku, 160 2 Lockness Place. Unit 34, Taunton Road,
Kawasaki-Shi, Kanagawa-ken Torrance Metropolitan Centre, Greenford,
214-0012, Japan CA 90501 USA Middlesex, UB6 8UQ,England
Tel +81-(0)44-850-8801 Tel +1-310-891-2800 Tel +44-20-8813-1666
Fax +81-(0)44-850-8838 Fax +1-310-891-3600 Fax +44-020-8813-1777
E-mail idxjapan@idx.tv
E-mail idxusa@idx.tv E-mail idxeurope@idx.tv