IDX A-E2KPm User Manual

A-E2KPm

Ki Pro Mini adaptor

Set up

ENDURA Battery V-Mount / Video Camera

Thank you for purchasing the A-E2KPm. This bracket is an optional adaptor designed to t the
AJA Flash Disk Recorder Ki Pro Mini onto a camcorder together with
to using the A-E2KPm, IDX recommends reading this Instruction Manual

V-Mount batteries. Prior
on how to best use this

bracket and recommends keeping this manual for your reference.

Specications

D-TAP output : 12V DC (unregulated) battery throughput (Max. 50W)

Dimensions : 113(W) x 134(D) x 180(H) mm / 4.45(W) x 5.28(D) x 7.09(H) inches.

Weight : Approx. 700g / 1.55lbs.

Included accessories : UNC 1/4-20 screw x 4

Preparation

Ki Pro Mini

DC output for the V-Mount
equipment.

＊

D-TAP

12V DC (unregulated) Battery Output

DC output for an on-board
camera light and other DC
operated accessory.

Securely t the bracket to the Ki Pro Mini
using the 4 x UNC 1/4-20 screws.

Please attach connector cable to
Ki Pro Mini as shown above.

Do not attempt to modify this unit. All work should be carried out by IDX authorized
service personnel only.
When connecting a battery or adaptor to the A-E2KPm, be sure to connect it rmly. If it is
not attached properly, it may result in loss or damage to the unit or even injury to the
user.
Stop using immediately in case of abnormal smell, leak, color, or chassis deformity
during use.
If you need any inspection or repairs, please contact your IDX dealer or appropriate
IDX oce.

Design and specication are subject to change without notice.

201106