IDW GS-2.5-N23EB, GS-2.5-023EB, GS-2.5-A23EB, GS-2.5-223EB Instruction Manual

G-Series Cooler

GS-2.5

COUNTERTOP COOLER

Manual is for the following model:

GS-2.5-023EB
GS-2.5-N23EB
GS-2.5-223EB
GS-2.5-A23EB

Instruction Manual

Manual is for the following model:
GS-2.5-023EB
GS-2.5-N23EB
GS-2.5-223EB
GS-2.5-A23EB

Instruction Manual

GS-2.5

GS-2.5

FOR YOUR FUTURE REFERENCE

• This easy-to-use manual will guide you in getting the best use of your cooler.

• Remember to record the model number and the serial number. This information can be found on the
inside of your cooler.

• Keep your receipt with this manual for future warranty service.

Model #:

Serial #:

Date of Purchase:

TABLE OF CONTENTS

Parts and Identication ......................................... 2

Safety Instructions ................................................. 3

Installation ........................................................... 3

Electric Connection ................................................ 3

Start ..................................................................... 3

Maintenance ......................................................... 4

Cleaning ............................................................... 4

Condenser Maintenance ........................................ 4

Light Replacement .................................................4

Power Failure ........................................................4

Moving the cooler .................................................. 4

Drip Pan ............................................................... 4

1

Troubleshooting .................................................... 5

Refrigerant ........................................................... 5

Specications ........................................................ 5

Switch Function ..................................................... 6

Flammable R600a Warnings ................................. 6

Circuit Diagram ..................................................... 7

Innovative DisplayWorks

Instruction Manual

SAFETY INSTRUCTIONS

To reduce the risk of  re, electric shocks, or injury when using your cooler, please note the following basic precautions:

• Never clean appliance parts with fl ammable fl uids.

• Do not store or use gasoline or any other fl ammable vapors and liquids in the vicinity of this or any other appliance.

The fumes can cause a  re or explosion.

• As with all electrical appliances, please consult a licensed repair technician for any repairs.

• Do not block the ventilation holes located on the top of the cabinet.

INSTALLATION

• Keep cooler in an upright position for 1-hour prior to use. This is essential for proper operation. If the cooler is

transported in the horizontal position, the cooler must be returned to the upright position and not plugged in for 1

hour.

• Remove all the packing material before using your cooler.

• Clean the interior surface with a soft cloth and lukewarm water.

• If the cooler is transported in the horizontal position, check the drain pan and ensure that it is properly positioned
above the compressor.

• For proper operation, place the cooler on a dry, level surface.

• Place the cooler at least 4” away from any walls. Otherwise, this could cause damage to the electrical cord and block
the air circulation to the appliance.

• Do not block the air intake that ventilates the condenser unit.

ELECTRIC CONNECTION

• This model operates with an 115V/60Hz power supply. Check the electrical outlet for proper voltage.

• Warning: Plug unit directly into wall outlet. Do not use an extension cord or any other multiple connectors.

• For your safety, plug the unit into a grounded wall outlet.

START

• Plug the cooler into the electrical outlet. For optimum performance, run cooler for 3 hours prior to use.

• Temperature Control: Do not adjust the temperature control. The temperature control is factory set to provide

maximum performance. If really necessary, you can turn the thermostat by screw driver clockwise to have lower

temperature inside the cooler

LIGHT CONTROL

• The inside light is controlled by the magnetic switch.

BEFORE USING, PLEASE READ ALL INSTRUCTIONS

PARTS & IDENTIFICATION

GS-2.5

1. Cooler Cabinet

2. Interior Light Bracket

3. Interior LED

4. Interior Lampshade

5. Interior Lampshade Board (2)

6. Evaporator

7. Circle Pipe

8. Evaporator Fan

9. Evaporator Safeguard

10. Evaporator Fan Cover

11. Rear Grill

12. Door Gasket

13. Glass Door

14. Top Hinge

15. Hinge Cover

16. Bottom Hinge

17. Bottom Hinge Washer

18. Door Lock

19. Key (2)

20. Large Shelf (2)

21. Pilasters (4)

22. Shelf Clip (8)

23. Lockpin

24. Magnetic Switch

25. Condenser Support (4)

26. Thermostat

27. Transformer 1A

28. Condenser Fan Transformer

29. Junction Box

30. Transformer Box

31. Transformer Box

32. Foot (4)

33. Compressor Panel

34. Compressor

35. Drip Pan

36. Thermostat Box

37. Thermostat Box Cover

38. Thermostat Label

39. Door Light Switch (2)

40. Filter Drier

41. Condenser Fan

42. Condenser Fan Cover

43. Fan Cover

44. Power Cord

45. Condenser

46. LED Lights (2)

2