ViVOpay™ VP6800 User Manual
Rev. A
Part Number 80159500-001
ID TECH
10721 Walker Street
Cypress, CA 90630
(714) 761-6368
www.idtechproducts.com
support@idtechproducts.com
Caution: Danger of Explosion if battery is incorrectly
charged. Use standard USB 5V power source for
USB operation. Use approved power source for
RS-232 operation. Device contains a lithium battery.
Approved temperature range for storage: -20℃ to
+60℃. Disposal: Contact your local recycling center.
Warning: Avoid close proximity to radio transmitters,
which may reduce the capabilities of the reader.
Copyright © 2018 ID TECH. All rights reserved.
This document, as well as the software and hardware described in it, is furnished under license and
may be used or copied online in accordance with the terms of such license. The content of this
document is furnished for information use only, is subject to change without notice, and should not
be construed as a commitment by ID TECH. While every effort has been made to ensure the
accuracy of the information provided, ID TECH assumes no responsibility or liability for any
unintentional errors or inaccuracies that may appear in this document. Except as permitted by such
license, no part of this publication may be reproduced or transmitted by electronic, mechanical,
recording, or otherwise, or translated into any language form without the express written consent of
ID TECH.
ID TECH and ViVOpay are trademarks or registered trademarks of ID TECH.
Warranty Disclaimer
The services and hardware are provided "as is" and "as-available" and the use of the services and
hardware are at its own risk. ID TECH does not make, and hereby disclaims, any and all other
express or implied warranties, including, but not limited to, warranties of merchantability, fitness for
a particular purpose, title, and any warranties arising from a course of dealing, usage, or trade
practice. ID TECH does not warrant that the services or hardware will be uninterrupted, error-free, or
completely secure.
This device complies with Part 15 of FCC Rules:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation of the device.
Cautions and Warnings
2
Table of Contents
1. OVERVIEW .......................................................................................................................................... 4
2. FEATURES ........................................................................................................................................... 4
3. SPECIFICATIONS .................................................................................................................................. 5
4. AGENCY APPROVALS AND COMPLIANCES ........................................................................................... 6
5. COMMUNICATIONS ............................................................................................................................ 6
6. BASIC OPERATION .............................................................................................................................. 7
7. INSTALLATION .................................................................................................................................... 7
8. TROUBLESHOOTING ............................................................................................................................ 8
9. FIRMWARE REFERENCE ....................................................................................................................... 8
10. SOFTWARE DEVELOPMENT SUPPORT ................................................................................................. 8
3
1. Overview
The all-new ViVOpay VP6800 by ID TECH is a state-of-the-art, 3-in-1 PCI PTS 5.x certified
unattended payment device that can accept magstripe, chip card (EMV), and/or NFC/contactless
payments. The unit features a 4.3-inch high-luminosity color touchscreen display, capable of
supporting PIN-on-glass transactions, and can also display video advertisements when it is not
being used for menu displays or customer interactions.
The VP6800 accepts all of today’s most popular payment methods, including those based on
digital wallet technology, including Apple Pay, Android Pay, and Samsung Pay, along with support
for loyalty technologies such as Apple Pay VAS and Google SmartTap. The VP6800 is suitable for
payment solutions involving:
Transportation
Vending
Parking
Quick Service Restaurant
POS Kiosks
Integration Options
A feature-rich Universal SDK is available to aid rapid development of external
(non-device-resident) payment applications that talk to VP6800. The Universal SDK is available
for the C# language on Windows and comes with sample code for demo apps. To obtain the SDK
and other useful utilities, demos, and downloads for VP6800, be sure to check the Downloads
link on the ID TECH public Knowledge Base at
https://atlassian.idtechproducts.com/confluence/display/KB/Knowledge+Base+-+Home (no
registration required).
Encryption
The ViVOpay VP6800 supports industry-standard Triple DES or AES encryption technology, with
DUKPT-based key management (per ANSI X.9-24). Encryption can be configured to occur with a
PIN variant key, or Data variant, as desired. ID TECH operates a certified Key Injection Facility,
capable of injecting your unit(s) with any required keys. Remove Key Injection (RKI) is also
available. Consult your ID TECH representative to learn about all available options involving key
injection.
As a PCI-validated SRED device, the ViVOpay VP6800 conducts periodic self-checks and
incorporates tamper detection features which, if triggered, cause automatic zeroization of
sensitive data and keys. Because of its SRED features, VP6800 is fully capable of being
incorporated into a P2PE certified solution.
2. Features
4.3 inch color digital display (480 x 272 pixels)
Supports PIN on glass
Concealed contactless antenna
4
PCI PTS 5.x certified with SRED validation
Hardware
MTBF
Transmitter Frequency
13.56 MHz +/- 0.01%
Transmitter Modulation
ISO 14443-2 Type A, Type B
ISO 18092 Peer-to-Peer
Typical Read Range
0 to 4 cm
Memory
Main: 8MB flash
iMXRT1052 (video): 32MB SDRM, 128MB NAND flash
2 SAM slots, microSD
Physical
Length
140 mm
Width
95 mm
Depth
52.1 mm
Environmental
Antenna
Operating Temperature
-25° C to 70° C (-13° F to 158° F), max change of 10° C per hour
Storage Temperature
-40° C to 80° C (-40° F to 176° F)
Operating Humidity
up to 95% non-condensing
Storage Humidity
10% to 90% non-condensing, duration 3 months
Operating Environment
Water resistant for indoor and outdoor use
Connectivity interface – RS-232, USB 2.0 via micro-USB, Ethernet 10/100M, and
optional WiFi/BLE
RS-232 port for external peripherals
3.5mm audio jack
Optional camera or 2D scanner
Supports EVA standard external mounting
Support for contactless loyalty kernels (Apple VAS, Google SmartTap 2.1)
Contactless payments (Apple Pay, Android Pay, Samsung Pay)
Supports latest certifications from the brands (Visa, Mastercard, Discover, American
Express, CUP, Interac, JCB)
Environmental certifications (RoHS, REACH, RED)
Encryption support (TDES, AES, DUKPT)
Remote Key Injection Support (PCI validated)
Firmware upgradeable in the field
3. Specifications
5
IK Rating
IK 08
IP Rating
IP 65
Electrical
Input Power
+5VDC 1A, 3.5W (RS-232 requires external power supply)
Screen
Dimensions, pixels
480 (height) x 272 (width)
Luminance/brightness
600 cd/m2
Touch Interface Type
Capacitive
Brightness
1000 nits (max)
Video
60 fps (motion JPEG)
4. Agency Approvals and Compliances
CE (EN55022/EN55024, Class- B)
FCC (Part 15, Class-B)
RoHS (DIRECTIVE 2011/65/EU)
UL
REACH
EMV Contact L1 & L2
EMV Contactless L1
EMV Contactless L2:
o Amex
o Discover
o MasterCard
o Visa
5. Communications
The ViVOpay VP6800 can communicate with a host via serial (RS-232), USB, or Ethernet
connections. Refer to the diagram below to see the layout of various ports.
6
6. Basic Operation
When power is supplied, the VP6800 will boot automatically and illuminate within about 5
seconds. Use cable P/N 80159217-001. Plug the 12-pin Molex connector into the back of the
VP6800, and supply 5VDC 1.44A power (via cannon connector at the powered DB9 connection)
using an AC0005R-3 (R00111700108) or equivalent power supply. Optionally also connect a
standard Ethernet cable between the RJ45 ports on the back of the VP6800 and the network port
of the host system.
7. Installation
Mount the unit according to the drawings shown, with M3 studs spaced 65 mm apart horizontally
and 67 mm vertically.
7
8. Troubleshooting
Consult the ID TECH Knowledge Base at
https://atlassian.idtechproducts.com/confluence/display/KB/Knowledge+Base+-+Home.
9. Firmware Reference
The ViVOpay VP6800 uses ID TECH's NEO II firmware. For a comprehensive guide to the device's
firmware-level commands, ask your ID TECH representative for the NEO II Serial Interface
Developer's Guide (or IDG). It is available at no charge to customers on request.
10. Software Development Support
To facilitate integration of the VP6800 into vending, POS, and other environments, ID TECH makes
available a Universal SDK that enables the rapid development of software apps for VP6800 using
C# on Windows or C++ on Linux. To obtain the Universal SDK, go to the ID TECH Knowledge Base at
https://atlassian.idtechproducts.com/confluence/display/KB/Knowledge+Base+-+Home and
choose the VP6800 from the Product page listings. Further information will be available there.
The Universal SDK contains redistributable libraries, sample code, and other materials that will aid
you in quickly creating VP6800 applications, greatly reducing the time spent in configuring the
device, parsing transaction data, etc.
8
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency (RF) Energy
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
enviroment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter and must be installed to provide a separation distance of at least
20cm from all persons.
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Loading...