VP3300/VP3300C/VP3300E
User Manual
80149509-001 Rev. D
3/30/2018
2
Copyright© 2018 ID TECH. All rights reserved.
ID TECH
10721 Walker Street
Cypress, CA 90630
USA
This document, as well as the software and hardware described in it, is furnished
under license and may be used or copied online in accordance with the terms of such
license. The content of this document is furnished for information use only, is subject
to change without notice, and should not be construed as a commitment by ID TECH.
While every effort has been made to ensure the accuracy of the information provided,
ID TECH assumes no responsibility or liability for any unintentional errors or
inaccuracies that may appear in this document. Except as permitted by such license, no
part of this publication may be reproduced or transmitted by electronic, mechanical,
recording, or otherwise, or translated into any language form without the express
written consent of ID TECH.
ID TECH and ViVOpay are trademarks or registered trademarks of ID TECH.
Warranty Disclaimer
The services and hardware are provided "as is" and "as-available" and the use of the
services and hardware are at its own risk. ID TECH does not make, and hereby
disclaims, any and all other express or implied warranties, including, but not limited to,
warranties of merchantability, fitness for a particular purpose, title, and any warranties
arising from a course of dealing, usage, or trade practice. ID TECH does not warrant
that the services or hardware will be uninterrupted, error-free, or completely secure.
3
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation of the device.
Notices: Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
This device complies with part 15 of the FCC rules. Operation is subject to two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to the VP3300, VP3300C, or VP3300E not expressly
approved by ID TECH could void the user's authority to operate the device.
Cautions and Warnings
Warning: Avoid close proximity to radio
transmitters, which may reduce the capabilities of
the reader.
4
Introduction
The ViVOPay VP3300 is ID TECH's family of ultra-compact, EMV L1/L2-certified contactless
card readers, designed for low cost, high reliability, and maximum compatibility with
existing contactless payment technologies (including Apple Pay, Android Pay, and Samsung
Pay).
The VP3300 family includes models with and without contact-EMV capability, as well as with
and without magnetic swipe reader (MSR) functionality. (See the chart shown further
below.) The economical VP3300C, which offers contactless-transaction capability without
contact-EMV or MSR, provides an extremely cost-effective way for merchants to add
tap-and-go capability to existing payment options, without the need to replace other
hardware. Likewise, for merchants who already have MSR capability but need to add
contact-EMV and NFC, the VP3300E offers an economical way to do so.
The VP3300 series incorporates the proven EMV L2 kernel of ID TECH's popular UniPay III
card reader. Developers can integrate VP3300-series products into EMV-ready terminal
systems with minimal effort using ID TECH's Universal SDK, available for Windows, Android,
or iOS.
Major Features of VP3300 Family
Micro-USB port for communications and power.
Magnetic stripe support (VP3300 only): ISO 7810/ISO 7811, Hi-Co+Lo-Co Magnetic,
JIS1/JIS2.
MSR (VP3300 only) is bidirectional, reading up to 3 tracks of data at once.
ICC support (VP3300 and VP3300E): EMV Level 1 and EMV L2 approvals. All L1 & L2 on
the device.
Contactless transaction support via Near Field Communication (NFC): all models.
LED status indicator.
Audio feedback.
Field upgradable firmware.
Standby mode for low power consumption.
Compact and ergonomic design to integrate with a variety of devices.
Available with a sturdy stand, for tabletop use.
TDES and AES 128 encryption support.
DUKPT key management.
Software Development Kits for Windows, Android, iOS.
One-year manufacturer's warranty.
Feature
VP3300
VP3300C
VP3300E
Contactless reader (NFC capability)
ICC reader with landing contacts and
EMV L1 and L2 certification
3-track MSR (magstripe reading)
EMVCo Contactless L1 and major card
brand contactless certifications (L2’s)
5
Compact Size
4 green LEDs for the contactless
indication
Audio feedback to signal good/bad card
reads, etc.
TDES and AES encryption algorithms
Supports ID TECH standard TR31 (and
optional TR34) Remote Key Injection
Supports multiple key slots
RoHS and REACH compliant
1 year manufacturer warranty
Magnetic Stripe Features (VP3300 only)
ISO 7810 / ISO 7811
AAMVA format
JIS I / II
Single / Dual / Triple Track Support
Bi-directional reading
Samsung Pay MST
ICC Contact Card Features (VP3300, VP3300E)
EMVCo Contact Level 1 & 2 compliant.
Contactless (NFC) Features:
ISO 14443 Type A&B
ISO 18092 (P2P)
MasterCard® MCL (Formerly PayPass)
Visa payWave/VCPS
Visa IRWIN
Discover® DPAS
American Express® ExpressPay
MIFARE
Apple Pay
Apple VAS Loyalty
Samsung Pay NFC & MST
Android Pay
Google SmartTap Loyalty
Before You Start Using VP3300 products
Devices in the VP3300 family are compact micro-USB devices for handling contactless
transactions. (See chart above for differences between models.) Your VP3300-series device
is designed to operate in conjunction with certified third party payment software and
compatible hosts, such as USB-equipped tablets, PCs, and smartphones. Before you connect
VP3300 to the host, install and activate the software application service according to the
instructions provided by your payment application service or software provider, then
connect the VP3300 to the host through a micro-USB cable (not included).
6
Electrical Power
State
Current Draw
Idle
230 mA
Contact EMV
230 mA
MSR swipe
280 mA
Contactless EMV
530 mA
Transactions per battery charge:
250 MSR + 125 EMV + 125 EMV CTLS transactions (Total 500 transactions) per charge.
LED Status and Audible Beeper During Transactions and Operation
Device Status
4 LED’s
Audible Beeper
Run Mode
Left LED Flash 300ms on/5s off
Contactless Read Successful
All 4 LEDs flash Once
1 longer beep
Contactless Read Failed
2 short beeps
ICC is being Processed
Left LED flashes: 500ms on/off, DO
NOT remove card
Magnetic Stripe Read Successful
All 4 LEDs flash Once
1 longer beep
Magnetic Stripe Read Failed
2 short beeps
Physical Specifications (VP3300, VP3300C, VP3300E)
Operation and Storage Environment
No.
Item
Specification
1
Physical Dimensions
64mm x 49mm x 14.5mm(LxWxH)
2
Structure Material
Plastic, PC UL 94V-0
4
Texture
MT11010
5
Weight
50g
Item
Specification
Note
Operating Temperature
0 °C to 55 °C
1. Non-condensing.
2. Product operation temperature is
limited to the range for the reason of
the constraint of Li-Battery
specification.
Storage Temperature
-20 °C to 60 °C
1. Non-condensing.
2. Product storage temperature is
limited to the range for the reason of
7
Other Agency Approvals and Compliances
CE (EN55022/EN55024, Class- B)
FCC (Part 15, Class-B)
RoHS (DIRECTIVE 2011/65/EU)
REACH
EMV Contact L1&L2
EMV Contactless L1
For Software Developers: Software Development Support
VP3300 devices are designed to be compatible with a wide range of third party payment
applications. ID TECH offers a Universal SDK (available for iOS, Android, or Windows) to
enable rapid application development with any model of VP3300 as the target device. The
languages supported include Objective C (on iOS), Java (on Android), and C# (on Windows).
The Universal SDK includes rich, powerful libraries that make communication with VP3300
comparatively easy while greatly facilitating debugging.
Normally, development of applications that take advantage of VP3300 capabilities can be
done in a high-level language like Java or C# (using convenience objects and data
structures), obviating the need to send hex-code commands directly via USB-HID.
Nevertheless, if you need to communicate with the device via audio jack or via USB-HID, it is
possible to do so. For a command reference for VP3300-series products, consult the NEO
Interface Developers Guide (IDG), P/N 80139403-001.
Demo App
The Universal SDK comes with a rich, fully featured demo app. Complete source code for the
demo app is included with the SDK.
the constraint of Li-Battery
specification.
Operating Humidity
5% to 95%
Non-condensing
Storage Humidity
5% to 95%
Non-condensing
8
To use the demo app: On Windows, plug your VP3300-series device into the host using a
USB-to-micro-USB cable (not included), then double-click the UniversalSDKDemo.exe file
and allow a few seconds for the main window to appear (see illustration below).
The Demo App displays available commands in a command tree, as shown above.
Single-click on a command to populate the center panel of the window with optional
settings relevant to the command (e.g., "Amount" and "Start EMV Additional Tags" above).
In some cases, text fields will appear, allowing you to enter custom values. When you are
ready to execute the command in question, double-click it in the command tree. The
command executes in real time and a data trace appears automatically in the center and/or
right-hand panels. (Use the Clear Logs button to clear both panels.)
9
www.idtechproducts.com
support@idtechproducts.com
10
Revision History
Revision
Date
Description of Changes
By A 9/15/2016
Initial release
KT
B 12/12/2016
-Removed all mentions of a battery
-Some layout edits
G.Wu
C
8/16/2017
Update product name
KT D 3/30/2018
Add electrical characteristics
KT
Loading...