IDT SDAH01 User Manual
User Manual for the SDAH01 Evaluation Kit for
the HS3001 Humidity and Temperature Sensor
© 2017 Integrated Device Technology, Inc. 1 November 16, 2017
Description
The SDAH01 Evaluation Kit is used to assess the HS3001 HighPerformance Relative Humidity and Temperature Sensor. The
hardware allows users to perform data logging experiments, and it
can communicate through a standard USB interface with the user’s
computer using the IDT Demo Software. This software makes it
possible to view measurements in real-time, adjust the resolution
of the sensor, configure measurement parameters, and download
previously logged measurements. The Evaluation Board can be
powered directly from the USB port of the user’s computer or from
a 1632 coin cell battery to enable fully autonomous (untethered)
data logging.
Kit Contents
SDAH01 Evaluation Board
3 HS3001 Sensor Modules
Sensor Module Extension Cable
USB Key (flash drive) with the IDT Demo Software
USB Cable
Quick Start Guide
User Manual for the SDAH01 Evaluation Kit
Features
SDAH01 Evaluation Board operating temperature: -40°C to
85°C
Relative Humidity Sensor Module with HS3001 sensor sample
mounted:
• RH accuracy: ±1.5%RH
• Operating temperature: -40 to 105°C
USB key containing the IDT Demo Software:
• Data plotter
• Measurement resolution configuration
• Data export
Sensor Module Extension Cable allows extending the
HS3001 Sensor Module to different measurement areas
SDAH01 Evaluation Kit
User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor
© 2017 Integrated Device Technology, Inc. 2 November 16, 2017
Important Notes
Disclaimer
Integrated Device Technology, Inc. and its affiliated companies (herein referred to as “IDT”) shall not be liable for any damages arising out of defects resulting from
(i) delivered hardware or software
(ii) non-observance of instructions contained in this manual and in any other documentation provided to user, or
(iii) misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT.
TO THE EXTENT PERMITTED BY LAW, IDT HEREBY EXPRESSLY DISCLAIMS AND USER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, WHETHER
EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A
PARTICULAR PURPOSE, STATUTORY WARRANTY OF NON-INFRINGEMENT, AND ANY OTHER WARRANTY THAT MAY ARISE BY REASON OF USAGE
OF TRADE, CUSTOM, OR COURSE OF DEALING.
Restrictions in Use
IDT’s SDAH01 Evaluation Kit consisting of the SDAH01 Evaluation Board, HS3001 Sensors, cables, documentation, and IDT Demo Software are designed to
provide a quick setup for taking RH% and temperature measurements with the HS3001 only. IDT’s SDAH01 Evaluation Kit and IDT Demo Software must not be
used for any mission-critical applications, end-customer products, or measurement reference source.
Contents
1. Setup ............................................................................................................................................................................................................3
1.1 User Computer Requirements and Setup ..........................................................................................................................................3
1.1.1 Computer Requirements .....................................................................................................................................................3
1.1.2 Software Installation and Setup ..........................................................................................................................................3
1.2 Kit Hardware Connections .................................................................................................................................................................4
2. Usage Guide .................................................................................................................................................................................................5
2.1 Measurement Settings .......................................................................................................................................................................5
2.2 Exporting Data ...................................................................................................................................................................................6
2.3 Data Logging Mode (Untethered) .......................................................................................................................................................6
2.4 Data Logging Settings ........................................................................................................................................................................7
2.5 Using the Plotter ................................................................................................................................................................................7
2.6 Valid Settings Ranges ........................................................................................................................................................................7
3. Ordering Information .....................................................................................................................................................................................7
4. Revision History ............................................................................................................................................................................................8
List of Figures
Figure 1. Initial Display after Installation of the IDT Demo Software ...................................................................................................................3
Figure 2. Evaluation Kit Connections ..................................................................................................................................................................4
Figure 3. Measurement Settings .........................................................................................................................................................................5
Figure 4. Set Resolution .....................................................................................................................................................................................5
Figure 5. Battery Installation ...............................................................................................................................................................................6
Figure 6. Download Data to IDT Demo Software ...............................................................................................................................................6
User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor
© 2017 Integrated Device Technology, Inc. 3 November 16, 2017
1. Setup
1.1 User Computer Requirements and Setup
1.1.1 Computer Requirements
A Windows®-based computer is required for interfacing with the kit and configuring the part. The user must have administrative rights on the
computer to install the IDT Demo Software for the kit.
The computer must meet the following minimum systems requirements:
CPU: Intel or compatible
RAM: 512 MByte
Windows® XP / Vista / 7 / 8 / 10
Ports: One available US port
1.1.2 Software Installation and Setup
Follow these procedures to install the IDT Demo Software:
1. Plug in the USB flash drive to start the setup.
2. If the setup process does not start automatically, double-click on the Setup.exe file.
Figure 1. Initial Display after Installation of the
IDT Demo Software
Loading...