Integrated Device Technology, Inc.
COMMERCIAL TEMPERATURE RANGE JULY 1996
1996 Integrated Device Technology, Inc. 3623/-
FEATURES:
• 1M x 4 advanced high-speed CMOS Static RAM
• JEDEC Center Power / GND pinout for reduced noise
• Equal access and cycle times
— 12/15/20ns
• Single 3.3V power supply
• One Chip Select plus one Output Enable pin
• Bidirectional data inputs and outputs directly
TTL-compatible
• Low power consumption via chip deselect
• Available in 32-pin, 400 mil plastic SOJ package
DESCRIPTION:
The IDT71V428 is a 4,194,304-bit high-speed Static RAM
organized as 1M x 4. It is fabricated using IDT’s highperfomance, high-reliability CMOS technology. This state-ofthe-art technology, combined with innovative circuit design
techniques, provides a cost-effective solution for high-speed
memory needs.
The IDT71V428 has an output enable pin which operates
as fast as 6ns, with address access times as fast as 12ns. All
bidirectional inputs and outputs of the IDT71V428 are TTLcompatible and operation is from a single 3.3V supply. Fully
static asynchronous circuitry is used, requiring no clocks or
refresh for operation.
The IDT71V428 is packaged in a 32-pin, 400mil Plastic
SOJ.
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
FUNCTIONAL BLOCK DIAGRAM
ADDRESS
DECODER
4,194,304-BIT
MEMORY ARRAY
I/O CONTROL
•
•
•
A0
A19
4
4
I/O0 – I/O3
¥
4
•
•
•
CONTROL
LOGIC
WE#
OE#
CS#
3623 drw 01
3.3V CMOS STATIC RAM
4 MEG (1M x 4-BIT)
ADVANCE
INFORMATION
IDT71V428
10.3 1