IDT Installation of the EB64H16 Eval Board
EB64H16 Eval Board Manual 2 - 17 January 16, 2007
Notes
W109 Header 2-3 Shunted 2-3: Port 4, +12V source base on W71 (Default)
1-2: Port 4, +12V source from hot-plug controller
W110 Header 2-3 Shunted 2-3: Port 5, +12V source base on W72 (Default)
1-2: Port 5, +12V source from hot-plug controller
W115 Header 2-3 Shunted 2-3: Port 6, +12V source base on W75 (Default)
1-2: Port 6, +12V source from hot-plug controller
W116 Header 2-3 Shunted 2-3: Port 7, +12V source base on W76 (Default)
1-2: Port 7, +12V source from hot-plug controller
W121 Header 2-3 Shunted 2-3: Port 8, +12V source base on W79 (Default)
1-2: Port 8, +12V source from hot-plug controller
W122 Header 2-3 Shunted 2-3: Port 9, +12V source base on W80 (Default)
1-2: Port 9, +12V source from hot-plug controller
W127 Header 2-3 Shunted 2-3: Port 10, +12V source base on W83 (Default)
1-2: Port 10, +12V source from hot-plug controller
W128 Header 2-3 Shunted 2-3: Port 11, +12V source base on W84 (Default)
1-2: Port 11, +12V source from hot-plug controller
W133 Header 2-3 Shunted 2-3: Port 12, +12V source base on W87 (Default)
1-2: Port 12, +12V source from hot-plug controller
W‘34 Header 2-3 Shunted 2-3: Port 13, +12V source base on W88 (Default)
1-2: Port 13, +12V source from hot-plug controller
W139 Header 2-3 Shunted 2-3: Port 14, +12V source base on W91 (Default)
1-2: Port 14, +12V source from hot-plug controller
W140 Header 2-3 Shunted 2-3: Port 15, +12V source base on W92 (Default)
1-2: Port 15, +12V source from hot-plug controller
W101 Header 2-3 Shunted 2-3: Port 1, +3.3V source base on W95 (Default)
1-2: Port 1, +3.3V source from hot-plug controller
W105 Header 2-3 Shunted 2-3: Port 2, +3.3V source base on W57 (Default)
1-2: Port 2, +3.3V source from hot-plug controller
W106 Header 2-3 Shunted 2-3: Port 3, +3.3V source base on W58 (Default)
1-2: Port 3, +3.3V source from hot-plug controller
W111 Header 2-3 Shunted 2-3: Port 4, +3.3V source base on W71 (Default)
1-2: Port 4, +3.3V source from hot-plug controller
W112 Header 2-3 Shunted 2-3: Port 5, +3.3V source base on W72 (Default)
1-2: Port 5, +3.3V source from hot-plug controller
W117 Header 2-3 Shunted 2-3: Port 6, +3.3V source base on W75 (Default)
1-2: Port 6, +3.3V source from hot-plug controller
W118 Header 2-3 Shunted 2-3: Port 7, +3.3V source base on W76 (Default)
1-2: Port 7, +3.3V source from hot-plug controller
W123 Header 2-3 Shunted 2-3: Port 8, +3.3V source base on W79 (Default)
1-2: Port 8, +3.3V source from hot-plug controller
W124 Header 2-3 Shunted 2-3: Port 9, +3.3V source base on W80 (Default)
1-2: Port 9, +3.3V source from hot-plug controller
Miscellaneous Jumpers, Headers
Ref.
Designator
Type Default Description
Table 2.17 Miscellaneous Jumpers, Headers (Part 3 of 4)