How it Works
IDK
Loading...
OPF-H1000-A
User Manual
25 pgs859.11 Kb0
Table of contents
Loading...

IDK OPF-H1000-A User Manual

POWER
SIGNAL
POWER
SIGNAL
RX
OPTICAL Rx for HDMI
OPF-RH1000-A
DC 5V 2A
FG
OPTICAL
OUTPUT
HDMI
TX
RS-232C
Rx
POWER
SIGNAL
POWER
SIGNAL
RX
O PTIC A L Tx for HDMI
OPF-TH1000-A
DC 5V 2A
FG
OPTICAL
INPUT
HDMI
TX
RS-232C
Tx
INPUT
AUDIO
OUTPUT
AUDIO
DIP-SW
DIP-SW
CLASS 1 LASER PRODUCT
クラス 1 レーザ製品
CLASS 1 LASER PRODUCT
クラス 1 レーザ製品
OPF-TH1000-A/OPF-RH1000-A User’s Guide
HDMI Fiber Optic Extender
OPF-TH1000-A/OPF-RH1000-A
User’s Guide Ver. 1.0.0
before using it and keep this manual beside the OPF-H1000.
IDK Corporation
1
OPF-TH1000-A/OPF-RH1000-A User’s Guide
Trademarks
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing, LLC in the United States and other countries.
All other company and product names mentioned in this manual are either registered trademarks or
trademarks of their respective owners. In this manual, the “®” or “™” marks may not be specified.
2
OPF-TH1000-A/OPF-RH1000-A User’s Guide
クラス 1
レーザ製品
CLASS 1
LASER PRODUCT
Before reading this manual
All rights reserved. Some of the contents in this User’s Guide such as appearance diagrams, menu operations,
communication commands, and so on may differ depending on the version of the extender.
This User’s Guide is subject to change without notice. You can download the latest version from IDK’s
website at: http://www.idk.co.jp/en/index.html
The lasers in this product meet Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 laser safety standards which specifies design safety.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Note: This equipment was tested with shielded cables on the peripheral devices. Shielded cables must be
used with the equipment to ensure compliance with FCC emissions limits.
CE MARKING
This equipment complies with the essential requirements of the relevant European health, safety and environmental protection legislation.
WEEE MARKING
Waste Electrical and Electronic Equipment (WEEE), Directive 2002/96/EC (This directive is only valid in the EU.) This equipment complies with the WEEE Directive (2002/96/EC) marking requirement. The left marking indicates that you must not discard this electrical/electronic equipment in
domestic household waste.
3
OPF-TH1000-A/OPF-RH1000-A User’s Guide
Enforcement Symbol
Description
Symbol
Description
Example
Hazard
disassemble
Caution
Warning
Safety instructions
Read and understand all safety and operating instructions before using this device. Follow all instructions and cautions as detailed in this document.
Indicates the presence of a hazard that may result in death or serious personal injury if the warning is ignored or the equipment is handled incorrectly.
Caution
Prohibition
Instruction
Indicates the presence of a hazard that may cause minor personal
This symbol is indicated to alert the user. (Warning and caution)
This symbol is intended to prohibit the user from actions.
This symbol is intended to instruct the user.
injury or property damage if the caution is ignored or the equipment is handled incorrectly.
Electrical
Do not
Unplug
4
Do not place the product in any unstable place.
Install the product to a horizontal and stable place. Otherwise, it may fall/turn over and lead to injury.
Do not place the product in any environment with vib ration.
Otherwise, it may move/fall and lead to injury.
Keep out any foreign objects.
from the vent holes.
For power cable/ plug:
damaged, contact IDK.
Do not repair, modify or disassemble. In the event of lighting or thunder, do not touch the main unit or cables such as
For installation:
IDK. Otherwise, it may cause fire, electric shock, injury, or property damage.
Set the power plug in a convenient place to unplug easily.
when you do not use it for a long period.
Plug the power plug into appropria te outlet completely.
plug or loosened outlet.
Clean the power plug regularly.
If the plug is covered in dust, it may cause fire due to reduced insulating power.
Unplug immediately if the product smokes, makes unusual noise, or smells.
the product stops smoking, contact IDK.
Unplug immediately if you drop the product or if the cabinet is damaged.
and repair, contact IDK.
Unplug immediately if water or other objects are directed inside.
contact IDK.
For connection
Warning
Prohibition
Do not
disassemble
OPF-TH1000-A/OPF-RH1000-A User’s Guide
In order to avoid fire or electric shock, do not allow foreign objects, such as metal and paper, to enter the product
● Do not scratch, heat, or modify, including extending them.
● Do not pull, put heavy stuff on them, or pinch them.
● Do not bend, twist, or tie them together forcefully.
If they are used in those states continuously, it may cause fire or electric shock. If power cables/plugs become
Since the product includes high-voltage parts, those actions may cause fire or electric shock. For internal inspections or repairs, contact IDK.
Do not touch
Instruction
Unplug
power cable and LAN cable.
Contact may cause electric shock
The product is intended to be installed by skilled technicians. For installation, please contact a system integrator or
You can easily unplug in case of any extraordinary failure or abnormal situation, and it also helps for unplugging
If the plug is plugged incompletely, it may overheat which causes electrical shock or fire. Do not use damaged
If you continue to use the product under those situations, it may cause electric shock or fire. After confirming that
If you continue to use the product under those situations, it may cause electrical shock or fire. For maintenance
If you continue to use it under those situations, it may cause electrical shock or fire. For maintenance and repair,
Differences in ground potential among the product and peripheral devices may cause electric shock or damage of the devices. When using cables to connect devices, including connection of long-distance transmission, unplug the power cables of all related devices.
Instruction
After connecting signal/control cables of each device, plug in the power cables of each device.
5
OPF-TH1000-A/OPF-RH1000-A User’s Guide
For installation
Instruction
Do not block the vent holes.
Do not plug or unplug with wet hands. Use and store the product within the specified temperature/humidity range.
Caution
Prohibition
No wet hands
Do not place the product in any place where it will be sub jected to high temperatures.
If the product is subjected to direct sunlight or high temperatures, it may cause fire.
Do not place the product in humid, oil smoke, or dusty pl ace.
If the product is placed near humidifiers or dusty area, it may cause fire or electric shock.
If ventilation slots are blocked, it may cause fire or failure due to internal heat.
Do not put heavy items on the product.
It may fall/turn over and lead to injury.
Do not exceed ratings of outlet and wiring devices.
If several plugs are put in an outlet, it may cause fire and electric shock.
Use only the provided AC adapter and power cabl e.
If non-compliant adapter or power cables is used, it may cause fire or electrical shock. Use the provided AC power connection cable. If you want to use your product in other countries that use different AC power cables, contact IDK.
It may cause electrical shock.
Instruction
Unplug
If the product is used outside the range continuously, it may cause fire or electric shock.
Turn off devices when they are connected to another d evice.
It may cause fire or electric shock.
Unplug the power plug if you do not use the product for a long period.
In case of defect, it may cause fire.
Unplug the power plug before cleaning.
It may cause electric shock.
For rack mount devices:
Mount the product to the rack meeting EIA standards, and maintain spaces above and below for air cooling. For your safety, attach an L-shape bracket in addition to the mount bracket kit for the front panel in order to ba lanc e the weig ht.
Instruction
For devices with rubber feet:
Never insert only the screws into the holes after removing the rubber feet. It may lead to damage when the screws contact electrical circuit or parts inside of the product. To put the rubber feet back on, use only provided rubber feet and screws.
Altitude:
Do not place the product at elevations of 2,000 meters (6562 feet) or higher above sea level. Failure to do so may shorten the life of the internal parts and result in malfunctions.
Instruction
6
OPF-TH1000-A/OPF-RH1000-A User’s Guide
Table of contents
1. Included items ........................................................................................................................................ 8
2. Product Outline ........................................................................................................................................... 9
3. Features ................................................................................................................................................... 10
4. Part names and descriptions .................................................................................................................... 11
4.1 Transmitter (OPF-TH1000) .............................................................................................................. 11
4.2 Receiver ........................................................................................................................................... 12
5 Connection ............................................................................................................................................... 13
5.1 Cascade connection ......................................................................................................................... 14
5.2 HDMI input/output cable ................................................................................................................... 14
5.3 Fiber optical cables for long distance transmission .......................................................................... 15
5.4 SFP (Small Form-factor Pluggable) module .................................................................................... 15
5.5 Audio Transmission .......................................................................................................................... 16
5.6 RS-232C Transmission .................................................................................................................... 16
5.7 Precautions ....................................................................................................................................... 17
5.8 Reference: Attaching cable clamp .................................................................................................... 19
6 Specifications ........................................................................................................................................... 20
6.1 Pin assignments of HDMI Type A connector.................................................................................... 20
6.2 RS-232C pin assignments ................................................................................................................ 20
6.3 Specifications ................................................................................................................................... 22
7. Troubleshooting ........................................................................................................................................ 24
7
OPF-TH1000-A/OPF-RH1000-A User’s Guide

1. Included items

Make sure all items below are included in the package. If any items are missing or damaged, please contact IDK.
“OPF-H1000” mentioned in this manual refers to OPF-TH1000 and OPF-RH1000 set.
■ Transmitter (OPF-TH1000)
● OPF-TH1000 (main unit) x 1
● AC adapter with screw type lock (1.2 m/3.94 feet) x 1
● Cable clamp x 1
■ Receiver (OPF-RH1000)
● OPF-RH1000 (main unit) x 1
● AC adapter with screw type lock (1.2 m/3.94 feet) x 1
● Cable clamp x 1
This User’s Guide is common to both the transmitter and receiver. You can download the latest version from IDK’s website at: http://www.idk.co.jp/en/index.html
8
Loading...
+ 17 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use