ididit Horn Contact Pin Assembly User Manual

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

Horn Contact Pin Assembly Installation Instructions

For Part Number 2612000010

Kit includes:

1 - Spring (A)
1 - Locking Sleeve (B)
1 - Pin (C)

1. Insert spring into the white tube of horn cam.

(Figure 2)

2. Slide black locking sleeve over the contact pin

so that the sleeve sets on the large at of the pin.

(Figure 3)

3. With the large at of the pin & holding the

black sleeve, compress spring until the tab on
the black sleeve lines up with the groove on the
horn cam. (Figure 4)

4. Twist black sleeve to the right and lock into

place. (Figure 5)

5. Once you have twisted locking sleeve into the
groove, your installation of contact pin is now
complete. (Figure 6)

www.ididitinc.com

ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI PH: 517-424-0577 FAX: [phone]

Instruction #: 8000010050 REV 01/13