iDevices Outdoor Switch User Manual

iDevices® OUTDOOR SWITCH

User Manual

iDevices® Outdoor Switch

v1.0

Table of Contents

In the Box ....................................................................................................................... 3

System Requirements ................................................................................................... 3

Getting Started .............................................................................................................. 3

Unit Mounting ......................................................................................................... 3

Unit Set Up .............................................................................................................. 5

Connecting To Your Outdoor Switch .................................................................. 5

Problem Solving ............................................................................................................ 5

Rating Information ........................................................................................................ 7

Regulations .................................................................................................................... 7

References ..................................................................................................................... 9

iDevices® Outdoor Switch

v1.0

1. In the Box

Inside your Switch box, you will find:

• (1) iDevices® Outdoor Switch

• (1) Quick Start Guide

• (1) Mounting Screw

2. System Requirements

• iPhone®4s and later

• iPad® 3

rd

generation and later

• iPad mini ™ and later

• iPod touch® 5th generation and later

• HomeKit™ requires an iPhone, iPad, or iPod touch with iOS 8.1 or later

• iDevices® Connected app version 2.0 or higher

• Wi-Fi® 2.4Ghz 802.11 b/g/n compatible network

o Router Security Settings Supported:

! WPA, WPA2, or None

3. Getting Started

3.1 Unit Mounting

• Remove Outdoor Switch from packaging

• Note 8 digit code located on the back of the unit and on the Quick

Start Guide

• Plug your Outdoor Switch into a grounded wall outlet and let unit
hang freely downward

• Note approximate location of hang tab, remove Switch and install
mounting screw such that the weight of the unit rests on the
mounting screw and not the power cord

• Plug Switch back into grounded wall outlet and install onto mounting
screw ensuring the weight of the unit is on the screw and not the
power cord.

• Ensure Switch plug receptacles are freely facing downward

• Reference Figure 1 for installation