Idesco A8AH Installation Manual
Access 8 AH ASENNUSOHJE
This device complies with Part 15 of the FCC Rules and
the FCC authorization to operate this equipment.
Access 8 AH INSTALLATION INSTRUCTIONS Ver 1.01
Tehonsyöttö:
10...30 VDC 130 mA
Kytkentä:
24VDC ………………….. Punainen
MAA …………………….. Musta
WIE0 / (Data)…………… Vihreä
WIE1 / (Clock)…………. Valkoinen
Vihreä LED…………….. Sininen
Punainen LED………… Ruskea
Summeri……………….. Keltainen
Card present………….. Violetti
Lukijoiden sijoittaminen alle 10 cm etäisyydelle
toisistaan tai lukijan asentaminen metallipinnalle
saattaa lyhentää lukuetäisyyttä.
Älä asenna voimakkaiden sähköhäiriölähteiden
läheisyyteen.
Älä katkaise kaapelia alle 10 cm pituiseksi.
Idesco Oy vakuuttaa täten, että Access 8 AH -lukija
on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Power supply:
10...30 VDC 130 mA
Connection:
24VDC…………………… Red
GND……………………… Black
WIE0 / (Data)…………… Green
WIE1 / (Clock)………….. White
Green LED……………… Blue
Red LED………………… Brown
Buzzer…………………… Yellow
Card present…………… Violet
If readers are placed closer than 10 cm away from each
other or if the reader is installed on metal the reading
distance can be shorter.
Do not install close to sources of powerful
electromagnetic disturbance.
Do not cut the cable shorter than 10 cm.
with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications made to this
equipment not expressly approved by Idesco may void
Access housing
Cable diameter
22
1
,
4
6
+/- 2,5
51
Led
+/- 2,5
94,1
Hereby, Idesco Oy, declares that this Access 8 AHreader is in compliance with the essential requirements
and other relevant provisions of directive 1999/5/EC.
Access Quattro housing
60mm
75mm
Author: EVa Approved : JPo Date : 06.10.2006
IDESCO Oy File: 1083E Printed :6.10.2006 14:26
Loading...