Identec Solutions ILR ICARD350 User Manual
Rhein Tech Laboratories, Inc. Client: Identec Solutions Inc.
360 Herndon Parkway Model: i-CARD CF-350
Suite 1400 Standards: FCC 15.249 & RSS-210
http://www.rheintech.com
Report #: 2008094
ID’s: O2E-ILR-ICARD350/3538B-ICARD350 Herndon, VA 20170
Appendix J: Manual
Please refer to the following pages.
Page 21 of 25
i-CARD CF-350
Compact Flash ILR Interrogator
Proprietary Notice
This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be
used or disclosed to other parties in whole or in part without prior written authorization from IDENTEC
SOLUTIONS.
Disclaimer and Limitation of Liability
IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents
provide the information contained in this Manual on an “as-is” basis and do not make any express or
implied warranties or representations with respect to such information including, without limitation,
warranties as to non-infringement, reliability, fitness for a particular purpose, usefulness,
completeness, accuracy or up-to-dateness. IDENTEC SOLUTIONS shall not in any circumstances be
liable to any person for any special, incidental, indirect or consequential damages, including without
limitation, damages resulting from use of or reliance on information presented herein, or loss of
profits or revenues or costs of replacement goods, even if informed in advance of the possibility of
such damages.
Trademarks
“IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered
trademarks and “i-Q”, “i-D”, “i-B”, “i-CARD”, “i-PORT”, “i-LINKS”, “Solutions. It’s in our name.”,
“Smarten up your assets” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC SOLUTIONS
AG.
Copyright Notice
Copyright © 2008 IDENTEC SOLUTIONS. All rights reserved.
No part of this document may be reproduced or transmitted in any form by any means, photographic,
electronic, mechanical or otherwise, or used in any information storage and retrieval system, without
the prior written permission of IDENTEC SOLUTIONS.
Reg. No. IM.0754.EN
Order Code:
Issue 0 / April 2008
– 28. April 2008 –
IDENTEC SOLUTIONS AG,
Millenium Park 2, 6890 Lustenau, Austria
Phone: +43 5577 87387- 0, Fax: +43 5577 87387-15
Email: info@identecsolutions.at
www.identecsolutions.com
Subject to alteration without prior notice.
© Copyright IDENTEC SOLUTIONS 2008
Printed in Germany
Page 2 of 15
i-CARD CF-350
Radio Frequency Compliance Statement
The user(s) of the product described within this document are cautioned to only use accessories and
peripherals approved, in advance, by IDENTEC SOLUTIONS, Inc. The use of accessories and
peripherals, other than those approved by IDENTEC SOLUTIONS, Inc., or unauthorized changes to
approved products, may void the compliance of these products and may result in the loss of the
user(s) authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) these devices may not cause harmful interference, and (2) these devices must accept any
interference, including interference that may cause undesired operation of the device.
FCC Compliance (i-CARD CF-350 / NA)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communication.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Industry Canada Compliance (i-CARD CF-350 / NA)
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for
successful communication.
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 0 dB. Antennas not included in this list or having a gain greater than 0 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 Ohm.
• Antenna: MDM-9000P, manufactured by MOBILE MARK (EUROPE), LTD.
Page 3 of 15
Compact Flash ILR Interrogator
Important Note
To comply with FCC radio frequency exposure compliance requirements, this device must be installed
by an IDENTEC SOLUTIONS certified technician.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it
does not emit RF field in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada.
Page 4 of 15
Loading...