IDEC XN Series Specification Sheet

ø30 XN Series Emergency Stop Switches

ø30 mm, 4-contact Emergency Stop Switch. Padlockable and flush bezel are available.

•Padlockable, ush bezel, ø60mm jumbo mushroom, illuminated, LED push-on are available.

•IDEC’s original “Safe break action” and reverse energy structure ensure the highest level of safety.

•Safety lock mechanism (IEC 60947-5-5, 6.2)

•Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-

1, Annex K)

•Short depth behind the panel – only 47.7 mm for 4-contact, illuminated (ush bezel: 60.4 mm, padlockable: 61.4 mm)

•Padlockable can be locked using padlocks when latched (main contact: OFF). The rugged aluminum diecast shroud allows for installing a maxi mum of 20 padlocks using a hasp (total weight: 1500g maximum).

•Silver with gold contacts.

•Red (Munsell 5R4/12) or bright red (Munsell 7.5R4.5/14) colors are

available.

Standards and Specications

Contact Ratings

NC main contacts/NO monitor contacts

Rated Insulation Voltage (Ui) 250V Rated Thermal Current (Ith) 5A Rated Operating Voltage (Ue) 30V 125V 250V

Resistive Load

AC 50/60 Hz

Main Contacts

Rated Operating Current

Monitor Contacts

Contact Material Gold-plated Silver

50/60 Hz

(AC-12) Inductive Load

(AC-15) Resistive Load

(DC-12) Inductive Load

(DC-13) Resistive Load

(AC-12) Inductive Load

(AC-14) Resistive Load

(DC-12) Inductive Load

(DC-13)

•Minimum applicable load: 5V AC/DC, 1 mA (reference value) (May vary depending on the operating conditions and load types.)

•The rated operating currents are measured at resistive/inductive load types specied in IEC 60947-5-1.

– 5A 3A

– 3A 1.5A

2A 0.4A 0.2A

1A 0.22A 0.1A

– 1.2A 0.6A

– 0.6A 0.3A

2A 0.4A 0.2A

1A 0.22A 0.1A

Illumination Ratings (LED)

Rated Voltage Operating Voltage Rated Current

24V AC/DC 24V AC/DC ±10% 15 mA

Note: An LED lamp is built into the contact block and cannot be replaced.

Direct Opening Action

Specifications

Applicable Standards

Operating Temperature

Storage Temperature –45 to +80°C Operating Humidity 45 to 85% RH (no condensation) Minimum Force Required for

Direct Opening Action Minimum Operator Stroke

Required for Direct Opening Action

Maximum Operator Stroke Contact Resistance Insulation Resistance Overvoltage Category II Impulse Withstand Voltage Pollution Degree 3 Operating Frequency 900 operations/hour

Shock Resistance

Vibration Resistance

Durability (at 900 operations/h, on-duration 40%)

Degree of Protection

Short-circuit Protection 250V/10A fuse (Type aM, IEC60269-1/IEC60269-2) Conditional Short-circuit

Current Terminal Style M3 screw terminal Recommended Tighten ing

Torque for Terminal Screw Recommended Tighten ing

Torque for Locking Ring Applicable Wire Size 0.75 to 1.25 mm Total Weight of a Hasp and

Padlocks Reinforced Insulation

(IEC 60664-1)

Weight

IEC60947-5-1, EN60947-5-1 IEC60947-5-5, EN60947-5-5 JIS C8201-5-1, UL508, UL991, NFPA79 CSA C22.2 No. 14, GB14048.5

Non-illuminated: –25 to +60°C (no freezing) Illuminated: –25 to +55°C (no freezing)

80N

4.0 mm

4.5 mm

50 mΩ maximum (initial value) 100 MΩ minimum (500V DC megger)

2.5 kV

Operating extremes: 150 m/s Damage limits: 1000 m/s

Operating extremes: 10 to 500 Hz, amplitude 0.35 mm, acceleration 50 m/s Damage limits: 10 to 500 Hz, amplitude 0.35 mm, acceleration 50 m/s

Mechanical: 250,000 operations minimum Electrical: 100,000 operations minimum 250,000 operations minimum (24V AC/DC, 100 mA)

Operator: IP65 (IEC60529) Terminal: IP20 (when XW9Z-VL2MF is installed)

1000A

0.6 to 1.0 N·m

2.5 N·m

(AWG18 to 16)

1500g maximum (padlockable)

Between live part and metal bezel (ush bezel, padlockable)

83g (XN1E-LV404Q4MR) 93g (XN1E-BV504MR) 89g (XN5E-LV404Q4MR) 120g (XN4E-LL404Q4MR)

Emergency Stop Switches

APEM

Switches & Pilot Lights

Control Boxes

Emergency Stop Switches

Enabling Switches

Safety Products

Explosion Proof

Terminal Blocks

Relays & Sockets

Circuit Protectors

Power Supplies

LED Illumination

Controllers

Operator Interfaces

Sensors

AUTO-ID

SEMI

D-038