IDEC TW Series Technical Specifications

Oiltight Switches & Pilot Devices

ø22mm - TW Series

TW Series — 22mm NEMA Style Pushbuttons

TW NEMA Style Switches with snap-on contacts

Key features include:

Corrosion resistant octagonal chrome plated locking bezel

• Snap-on 10A contact blocks

• Incandescent or LED illumination

• Slow make, double break, self cleaning contacts

• Modular construction for maximum ﬂ exibility

• NEMA 4X and IP65 watertight/oiltight panel

• Available assembled or as sub-components

• Large M3.5 screw terminals with captive sems plate

•

Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks

IDEC has your 22mm switching needs covered.

Button styles include ﬂ ush, extended, mushroom, or square and all bodies are crafted from fracture-resistant nylon.

All illuminated units feature two lense styles, one that maximizes light dispersion, the other accommodates direct lens engraving.

Self cleaning contact mechanisms allow for a wide current rating, 5mA to 10A, which reduces the need for various contact materials.

When looking for a 22mm switch that is durable, easy to use, and versatile, then IDEC’s TW series is your solution.

UL Listed File No. E70646

CSA Approved File No. LR21451

File No. DK95-01696

Circuit Breakers

USA: 800-262-IDEC Canada: 888-317-IDEC

561

ø22mm - TW Series

Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 No.14 Approvals

Oiltight Switches & Pilot Devices

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks

Operating Temperature Operation: –25 to +50°C (without freezing), Storage: –40 to +80°C (without freezing) Vibration Resistance 5 to 55Hz, 100m/sec2 (10g) conforming to IEC6068-2-6 Shock Resistance 1000m/sec2 (100g) conforming to IEC6068-2-7 Electric Shock Protection Class 0 conforming to IEC60536 Degree of Protection

(conforming to IEC60529) (conforming to NEMA ICS6-110)

Mechanical Life

Pollution Degree (conforming to IEC60947-1) 3 for switches not using a transformer, 2 for switches using a transformer

Speciﬁ cations

Rated Operational Characteristics

Rated Insulation Voltage 600V Rated Switching Over-Voltage Less than 4kV, conforming to IEC60947-1 Rated Impulse Withstanding Voltage 4kV for contact circuit, 2.5kV for lamp circuit Rated Thermal Current 10 Amp Minimum Switching Capacity 5 mA at 3V AC/DC Contact Operation Slow break NC or slow make NO, self-cleaning Recommended Terminal Torque 0.8 N m (7.1 in lb.) External Short-Circuit Protection 10A 250V fuse conforming to IEC60269-1 Applicable Wire Size Minimum 1 x 22 AWG, max. 2 x 14 AWG or 1 x 12 AWG Contact Resistance Initial contact resistance of 50mΩ or less Contact Gap 4mm (NO and NC), 2mm (NO-EM and NC-LB) Electrical Reliability MTBF < 1 fault for 10 million operation cycles (3V DC, 5mA)

Lamp Ratings

Horsepower Rating 1/4 HP @ 120V (single-phase, non-reversing motor); 1 HP @ 240V (3 phase, non-reversing motor) Maximum Inrush Current 40 A (40 ms) Contact Material Silver

File No. E70646

Registration No: J9551802 (E-Stops) Registration No: J9551803 (All other switches) Registration No: J9551804 (Pilot Lights)

File No. LR21451

Certiﬁ cate No. 2030010305027380

CSA: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V) UL: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V) TÜV: pushbuttons and selector switches: A600=P600 (NO, NC)/Q600 (NO-EM, NC-LB) pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V)

IP65 from front of the panel; (IP54 for key switches) IP20 (Type HW-F contact block) NEMA 1, 2, 3, 3R, 3S, 4, 4X, 5, 12, 13 (NEMA 1, 2, 3R, 5, 12, 13 for key switches)

Momentary pushbuttons: 5,000,000 (900 operations per hour) All other switches: 500,000

AC-15: A600 or Ue = 250V, le = 3A (NO, NC, NO-EM, NC-LB) DC-13: P600 or Ue = 125V, le = 1.1A (NO, NC) DC-13: Q600 or Ue = 125V, le = 0.9A (NO-EM, NC-LB)

Incandescent: 1 W LEDs: 6V: 17mA max, 12/24V: 11mA max, 120/240V: 10mA max

Pushbuttons Illuminated Pushbuttons Selector Switches Illuminated Selector Switches Pushbutton Selectors

Contact Ratings

Operational Voltage 24V 48V 50V 110V 220V 440V

Circuit Breakers

Operational Current

Characteristics

562

Contact Block Type HW-C/HW-F Rated Insulation Voltage 600V Rated Continuous Current 10A Contact Ratings by Utilization Category

IEC 60947-5-1

AC50/60Hz

AC-12 Control of resistive loads and solid state loads 10A — 10A 10A 6A 2A

AC-15 Control of electromagnetic loads (> 72VA) 10A — 7A 5A 3A 1A

DC-12 Control of resistive loads and solid state loads 8A 5A — 2.2A 1.1A —

DC-13 Control of electromagnets 5A 2A — 1.1A 0.6A —

Contact Ratings by Utilization Category

AC-15 (A600) DC-13 (P600)

www.idec.com