IDEC Terminal Blocks Accessories Catalog
Accessories Terminal Blocks
Accessories
Part Numbers: End Plates, DIN Rail Stops, Stand-Offs, DIN Rail and Dust Covers
Description Appearance Use with Part No. Remarks
BNH10W
End Plates
DIN
Rail Stops
BNH15MW
BNH15LW
BNH30W BNE30W
BNF10SW
BNF10NW
BNF10DW
BNH50W BNE50W
BN75W BNE75W
BN150W BNE150W
BNDH15W BNDE15W
BNH10W
BNH15MW
BNH15LW
BNH30W
BNH50W
BNF10SW
BNF10NW
BNF10DW
BA111T
BA211T
BA311T
BA411S
BAF111SU
BAF111SDU
BN75W
BN150W
BNDH15W
BN200NW#
BN400NW#
BNE15W
BNE20
BNL5
(small)
BNL6
(medium)
BNL8
(large)
1. DIN rail stops prevent
side-to-side movement.
2. The BNL-5 width is 0.375" (9.5mm).
1. DIN rail stops prevent
side-to-side movement.
2. The BNL-6 width is 0.375" (9.5mm).
3. To firmly stabilize these higher profile
terminal blocks, the BNL-6 has a higher
profile than the BNL-5.
1. DIN rail stops prevent
side-to-side movement.
2. The BNL-8 width is 0.571" (14.5mm).
3. # = number of poles.
DIN Rail
Stand-Offs
DIN Rail
P
BNC230 BNC320
Dust
Covers
Terminal Blocks
BNC420 BNC520 BNC820 BNC1000
All series
All series
BNDH15W
BNH10W
BNH15MW
BNH15LW
BNH30W
BNH50W BNC320
BN75W BNC420
BN150W BNC520
BN200 BAC820
BN400 BNC1000
BNS3 1.46" (37mm) height
BNS4 3.03" (77mm) height
BNDN1000
(length 39.37"
(1m))
BNC230
1. For calculating the rail lengths
required, see the instructions on
page P-18.
2. The DIN rail material is aluminum.
The overall length is 39.37" (1,000mm).
The material is polycarbonate.
P-12 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
Terminal Blocks
Accessories con’t
Part Numbers: Rods, Nuts, Marking Strips, Dust Covers, and Jumpers
Description
Marking Strips
Marking Strip
Fastener
Ring Terminal
Jumpers
Fork Terminal
Jumpers
Appearance Use with Part No. Remarks
BNM7
All series
BNM9
All series BNM3
BNH10W BNJ16
BNH15MW BNJ26W
BNH15LW BNJ46
BNH30W BNJ56
BNDH15W BNJ26W
BNH10W BNJ16F
BNH15MW BNJ26FW
BNH15LW BNJ46F
BNH30W BNJ56F
BNDH15W BNJ26FW
Accessories
Material:
polyvinyl chloride (PVC)
Strip dimensions are
0.37"x39" (9.5 x 1,000mm).
Material: fiberglass
Strip dimensions are
0.37"x39" (9.5 x 1,000mm).
Used to prevent marking
strips from sliding out.
Jumpers come standard
with 6 points.
Note : insulated jumpers
available - add “B” to end
of part number. For example, BNJ26WB.
Surface Mount
Bracket
M4 Thread Rod
Connecting Nuts
For accessory dimensions, see page P-14.
BNDH15W
(dual-deck)
BNDH15W
BNR1
BNR2
BNDL2
BNR1
(265mm)
BNR2
(500mm)
BNN1
Used to surface mount
dual-deck terminal blocks.
(BNDL2).
1. Rod and connecting
nuts are used to mount
dual-decks collectively.
2. Each connecting nut set
includes 1 hex connecting nut and 1 round
connecting nut.
3. The BNR1 rod dimensions are 0.027 "x 10.43"
(0.7 x 265mm).
4. The BNR2 rod dimensions are 0.027" x 19.69"
(0.7 x 500mm).
P
Terminal Blocks
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC P-13
Loading...