IDEC announces the release of new superbright
LED lights for illuminated pushbuttons in the HW,
TW, TWTD, LW, A6 and L6 series.
Even with increased brightness, the new LEDs
have a lower current draw than earlier models,
and also feature color bands to make identifying
items easier.
Superbright LEDs come in 6V, 12V, and 24V AC/DC
models, as well as 120VAC models (except A6)
and 240VAC models (except A6 and L6). Available
colors are: amber, green, red, blue, white, and
yellow. The white LSTD LEDis now a true white,
without any yellowish tint. Blue LEDs come in all
voltages as well, not just 24V as in the past.
The LSTD models (back right) fit the HW, TW,
TWTD and LW series. The LATD models (back left)
are for the A6 series, and the LFTD models (front
center) are for the L6 series.
New models will be phased in to
assembled pushbuttons and pilot
lights as the older model inventory
is depleted. Superbright LEDs are
also available as sub-components.
For more information, contact IDEC
today.
Introducing
Superbright LEDs
• Available for HW, TW, TWTD,
and LW series (LSTD); A6 series
(LATD); L6 series (LFTD)
• Lower current draw than earlier
models
• Non-polarized construction
• Built-in circuitry to resist
turning on from leakage currents
• Increased brightness
• Blue LEDs available in all
voltages
• 240VAC models for HW, TW,
TWTD, LW series; 120VAC
models for L6 series
• See part numbers and
replacement information on
reverse
©2002 IDEC Corporation. 1/02 All Rights Reserved.
For more information,
contact your local IDEC representative
or visit us on the web at
www.idec.com