IDEC SmartRelay Data Sheet

6th-Generation IDEC SmartRelay
BASE MODULE GENERAL SPECIFICATIONS
Item Specications Standard
Operating Temperature
Storage/Transportation Temp.
Relative Humidity
Atmospheric Pressure
Operating Condition
Degree of Protection
Vibration Resistance
Shock Resistance
Drop Test (packaged)
Emissions
Electrostatic Discharge Immunity
Radiation Field Immunity
Fast Transient Burst
Surge Immunity
(FL1F-H12RCC, FL1F-B12RCC only)
Communication Cable
Terminal Style
1: For protection against surge noise on DC power supply types (FL1F-H12RCE/B12RCE, FL1F-H12SCD, FL1F-H12RCA/B12RCA), use surge absorbers,
noise cut transformers or noise filters. Use of a surge protection device (DEHN + SÖHNE GmbH + Co, BVT AD 24 Part No. 918 402) is recommended.
2: Tightening torque 0.5 to 0.6N·m
Horizontal Mounting
Vertical Mounting
1
0 to 55°C (no freezing) 0 to 55°C (no freezing) –40 to +70°C (no freezing) — 10 to 95% (no condensation) IEC60068-2-30 795 to 1080hPa — No corrosive gas — IP20 — 5 to 8.4Hz, amplitude 3.5mm
8.4 to 150Hz, acceleration 9.8m/s² 147m/s² IEC60068-2-27
0.3m IEC60068-2-32
Limit class B Group 1
8kV air discharge 6kV contact discharge
Field Strength: 1V/m a nd 10V/m
2kV (power line) 2kV (I/O signal line)
1kV (power line) normal 2kV (power line) common
2.5mm ² (one wire)
1.5mm² (two wires)
Finger-safe type
2
Cold: IEC60068-2-1 Hot: IEC60068-2-2
IEC60068-2-6
EN 550 11/A EN55022/B EN50081-1
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
PRODUCT DESCRIPTION
With an ever-changing market and tough competition, you need an edge to stay on top. This sixth-generation IDEC SmartRelay meets your demands from all small-scale applications by offering more powerful hardware, a new display and full communication options via Ethernet.
BASE MODULE HIGHLIGHTS
Embedded RJ45 Ethernet Port
• Remote program download, upload and monitor
• Integrated web server for remote monitoring and control
Micro SD Card
• Equipped with micro SD slot for program storage, transfer and data logging
• No need for a special memory cartridge
Data Logging
• Up to 20,000 lines in a file with a maximum of 50 files can be stored in the Micro SD Memory card
Integrated Web Server
• Easily monitor and control web pages with no HTML knowledge
• Instant monitoring and control using standard web browser like Chrome, IE and Firefox
• View and control I/O status, timer, counters, analog set point and more
There's an App for that!
• Download iOS and Android App for free
• Using the SmartRelay App, users can view and control any I/O status, timer, counters, and analog set point anywhere and at any time
1:N Communication
• FL1F SmartRelays now have the capability to communicate with each other over an Ethernet network
• Up to 16 FL1F SmartRelays can be configured on the network
R
USC
1
TEXT DISPLAY PANEL HIGHLIGHTS:
New and improved LCD display
Improved display with 6 lines and 20 characters per line, more than twice as many characters as before
Selectable white, amber or red backlighting for optical emphasis on alarms and events
Two RJ45 Ethernet ports
Use a standard Ethernet cable to the connect FL1F base module to the Text Display Panel. A special cable is not required.
Provide different ways to connect
TEXT DISPLAY SPECIFICATIONS
Text Display General Specications
Item Specications Standard
Horizontal
Operating Temperature
Storage/Transportation Temp.
Relative Humidity
Atmospheric Pressure
Operating Condition
Degree of Protection
Vibration Resistance
Shock Resistance
Drop Test (packaged)
Emissions
Electrostatic Discharge Immunity
Radiation Field Immunity
Fast Transient Burst
Surge Immunity
(FL1F-H12RCC, FL1F-B12RCC only)
Communication Cable
Terminal Style
1 For protection against surge noise on DC power supply types (FL1F-H12RCE/B12RCE, FL1F-H12SCD, FL1F-
H12RCA/B12RCA), use surge absorbers, noise cut transformers, or noise filters. Use of a surge protection device (DEHN + SÖHNE GmbH + Co, BVT AD 24 Part No. 918 402) is recommended.
2 Tightening torque 0.5 to 0.6N·m
Mounting Vertical
Mounting
1
0 to 55°C (no freezing)
0 to 55°C (no freezing)
Cold: IEC60068-2-1 Hot: IEC60068-2-2
–40 to +70°C (no freezing)
10 to 95% (no condensation) IEC60068-2-30
795 to 1080hPa — No corrosive gas — IP20 — 5 to 8.4Hz, amplitude
3.5mm
8.4 to 150Hz, acceleration
2
9.8m/s
2
147m/s
IEC60068-2-6
IEC60068-2-27
0.3m IEC60068-2-32 EN 55011/A
Limit class B Group 1
EN55022/B EN50081-1
8kV air discharge 6kV contact discharge
Field Strength: 1V/m and 10 V/m
2kV (power line) 2kV (I/O signal line)
1kV (power line) normal 2kV (power line) common
2.5mm2 (one wire)
1.5mm2 (two wires)
Finger-safe type
2
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
Text Display General Specications Cont.
Dimensions (W × H × D)
Weight (approx.)
Installation
Keyboard
Display
128.2 × 86 × 38.7 mm 220g Panel cut-out using mounting clips
Membrane keypad FSTN graphic display
(W × H: 160 × 96 dots) LED backlight (White, Amber, Red)
Font type
Displayable string
English, Spanish, Russian, Chinese, Italian, Turkish, German, Dutch, French, Japanese
1 screen 6 lines × 20 columns
Power Supply Specications
Power Voltage
Allowable Voltage Range
Allowable Voltage Frequency
Power Consumption
Data Transmission Rate
24V AC/DC 12V DC
20.4 to 26.4V AC
10.2 to 28.8V DC 47 to 63Hz 12V DC: 145mA (Typ.)
24V DC: 70mA (Typ.) 24V AC: 75mA (Typ.)
10/100M full/half duplex data transmission rate
LCD Display / Backlight Specications
LCD Display Durability
Backlight Durability
3 Display durability is calculated under ordinary operating and storage conditions: room temperature,
normal humidity below 65% RH, and not subjected to direct sunlight.
4 Backlight durability is the number of hours taken for the light to become 50% of the original brightness.
3
4
50,000 hours
20,000 hours
2
PART NUMBERS
Sn=8
AX
Sn
AQAx
Monday
TR TS TR TS TR TS
Q
Tuesday Wednesday...
Q
0
380
Mode
En
(IfERst=1)
En
R
AQ
LapT
CurT
Lap
AQ
En Lap R
St=10s
St=10s
AX
En R
AQ
Sn
AQ
En R Ax
AQ
En S1 Ax
Base Module
Rated Power Voltage Input Signal Output Signal Display Clock I/O Points Weight (approx.) Part No.
24V DC
12/ 24V DC
24V AC/ DC
100 to 240V AC/D C
1 With NPN/PNP sensor input. For details, see Input Internal Circuits in the Specifications table.
DC I1, I2, I7 and I8 are used for digital/ analog inputs
1
AC/DC
AC/DC Relay
Expansion I/O Module
Type Rated Power Voltage Input Signal Output Signal I/O Points Weight (approx.) Part No.
24V DC DC Transistor 4/4 points 95g FL1F-M08B1S2
Input/Output
12/24VDC DC Relay 4/4 points 130g FL1F-M08B2R2
2
24V AC/DC 100 to 240V AC/DC AC/DC Relay 4/4 point s 130g FL1F-M08C2R2
Analog Input
Analog Output
2 With NPN/PNP sensor input. For details, see Input Internal Circuits in the Specifications table. I/O points within the maximum number of expandable I/O points can be used. When using modules of the same power voltage, supply power to the base module and expansion I/O modules using one power supply.
When power is supplied to the modules from different power supplies, the fast transient burst is 1 kV (IEC61000-4-4).
12/24V DC Analog 2/0 points 95g FL1F-J2B2 24V DC Analog 0/2 points 95g FL1F-K2BM2
Text Display
Rated Power Voltage Weight (approx.) Part Number Remarks
24V AC/DC 12V DC
220g FL1F -RD1
Transistor Yes Yes 8/4 points 195g FL1F-H12SCD
AC/DC
Relay
Relay
2
Yes
200g FL1F-B12RCE
Yes
200g FL1F-B12RCA
Yes
200g FL1F-B12RCC
Yes 8/4 points
Yes 8/4 points
Yes 8/4 points
Relay 4/4 point s 130g FL1F-M08D2R2
240g FL1F-H12RCE
240g FL1F-H12RCA
240g FL1F-H12RCC
Supplied with mounting clip and gasket
Options
Description Part Number Package Quantity Remarks
Application Software: WindLGC
Mounting Clip for Base Module
Mounting Clip and Waterproof Gasket for Text Display
IDEC SmartRelay User’s Manual (English)
3 Supplied with a base module and an expansion module. 4 Supplied with a text display, it includes a gasket, four mounting clips, and a power supply connector.
NEW FUNCTION BLOCKS
AQ
Sn=8Sn=8Sn=8Sn=8Sn=8
Sn=8
Ta
300
350
250
200
100
100
300
200
380
250
100
0
3
2
1
Ax
Analog filter
Astronomical clock
Max/Min
1 2 3 4 5 6 7 8 9 10 ...
Ax
Ta Ta
AC
300
Ax
S1
AQ
0
FL9Y-LP1CDW 1 DVD-ROM (incl. online help manual) FL1F-PSP1PN05 5 Supplied with a module FL1F -KW1 1 Supplied with text display
3
4
FL9Y-B1789 1 Downloadable from: http://www.idec.com/download
Stopwatch
Average value
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Sn=8
Sw
Sn=8
Ax
3
BASE MODULE SPECIFICATIONS
Base Module Type No. FL1F-H12SCD
Rated Power Voltage
Allowable Voltage Range
Rated Frequency
Current Draw
Allowable Momentary Power
Power Supply
Interruption
Power Consumption
Reverse Polarity Protection
Backup Duration
Clock
Clock Accuracy
Input Signal
Input Points
High-speed Input
Analog Input Points
Analog Input Range
Analog Input Error
Analog Input Resolution
Cycle time
Allowable Voltage Range
Input Impedance
Isolation
Input
Operating Range
Turn ON Time
Turn OFF Time
Wire Length
Output Signal Output Points/
Contact Conguration
Isolation Dielectric Strength
(betwe en power/input te rminals and output ter minals)
Output Voltage
Maximum Load Current
Output
Surge Current
Short-circuit Protection
Minimum Switching Load
Initial Contact Resistance
Mechanical Life
Electrical Life
1 When selecting frequency trigger function and up/down counter function. 2 10m when connected to analog input (twisted pair cable) Initialization Time: After power-up, the FL1F takes a maximum of 9 seconds (when using a micro SD card) for initialization. When initialization is complete, the FL1F is automatically set to RUN mode.
1
Digital Input
Analog Input
OFF Voltage
ON Voltage
OFF Current
ON Current
2
24V DC 12/24V DC 24V AC/DC 100 to 240V AC/DC
20.4 to 28.8V DC 10.8 to 28.8V DC
47 to 63Hz 47 to 63Hz
15 to 50 mA (24V DC)
1.2A (with max. load on digital output)
1.2 W (24V DC)
Yes Yes — 20 days 20 days 20 days 20 days ±2 sec/day (Typ.) ±2 sec/day (Typ.) ±2 sec/day (Typ.) ±2 sec/day (Typ.)
DC DC AC/DC AC/DC 8 (I1 to I8) 8 (I1 to I8) 8 (I1 to I8) 8 (I1 to I8) 4 (I3, I4, I5, I6), 5kHz maximum 4 (I3, I4, I5, I6), 5kHz maximum — 4 (I1, I2, I7, I8) 4 (I1, I2, I7, I8) — 0 to 10V DC (max. rated input: 2 8.8V DC) 0 to 10V DC (max . rated input: 28.8V DC) — ±1.5 (of full scale) ±1.5 (of full scale) — 10 bits (0 to 1000) 10 bits (0 to 1000) — 300ms 300ms 300ms 300ms
0 to 28.8V DC 0 to 28.8V DC
5.8kΩ 5.8kΩ 4.8kΩ 610kΩ 72kΩ 72kΩ
< 5V DC < 5V DC < 5V AC/DC
≥ 12V DC ≥ 8.5 V DC ≥ 12V AC/DC ≥ 79V AC ≥ 79V DC
< 0.9mA (I3 to I6) < 0.07m A (I1, I2, I7, I8) < 0.88mA (I3 to I6) < 0.07mA (I1, I2, I7, I8) < 1.2mA < 0.05mA (AC) < 0.06mA (DC) ≥ 2.1mA (I3 to I6) ≥ 0.18mA (I1, I2, I7, I8) ≥ 1.5mA (I3 to I6) ≥ 0.12mA (I1, I2, I7, I8) ≥ 2.6m A ≥ 0.08mA (AC) ≥ 0.13mA (DC)
1.5ms ( Typ.) ≤ 1.0ms (I3 to I6)
1.5ms ( Typ.) ≤ 1.0ms (I3 to I6)
100m 100m 100 m 100m Transistor source output Relay output Relay output Relay output
4 points (separate) 4NO contacts 4NO contacts 4NO contacts
Isolated Isolated Isolated
External power voltage
0.3A maximum
30A maximum 30A maximum 30A maximum
Built-in current limiting resistor: Approx. 1A
10mA, 12V DC (reference value) 10mA, 12V DC (reference value) 10m A, 12V DC (reference value)
FL1F-H12RCE FL1F-B12RCE
30 to 140 m A (12V DC) 15 to 90 mA (24V DC)
2ms Typ. (12V DC) 5ms Typ. (24V DC)
1.7W (12V DC)
2.2W (24V DC)
1.5ms ( Typ.) ≤ 1.0ms (I3 to I6)
1.5ms ( Typ.) ≤ 1.0ms (I3 to I6)
2500V AC, 1 minute 500V DC, 1 minute
Resistive load 10A at 12/24V AC/DC 10A at 100/120V AC 10A at 230/24 0V AC
0.2A at 120V DC
0.1A at 240V DC Inductive load 2A at 12/24V AC/DC 3A at 100/120V AC 3A at 23 0/240V AC
0.2A at 120V DC
0.1A at 240V DC
External fuse required: 16A maximum
100mΩ ma ximum (at 1A, 24V DC)
10 million operations (no load, 10Hz)
100,000 operations (rated resistive load) 1800 operations/hour
FL1F - H12R CA FL1F - B12R CA
20.4 to 26.4V AC
20.4 to 28.8V DC
15 to 150mA (12V DC) 15 to 130mA (24V DC)
5ms Typ. (24V AC/DC)
3.6 W (24V AC)
3.2 W (24V DC)
0 to 26.4V AC 0 to 28.8V DC
1.5ms ( Typ.)
15ms (Ty p.)
2500V AC, 1 minute 500V DC, 1 minute
Resistive load 10A at 12/24V AC/DC 10A at 100/120V AC 10A at 230/24 0V AC
0.2A at 120V DC
0.1A at 240V DC Inductive load 2A at 12/24V AC/DC 3A at 100/120V AC 3A at 23 0/240V AC
0.2A at 120V DC
0.1A at 240V DC
External fuse required: 16A maximum
100mΩ ma ximum (at 1A, 24V DC)
10 million operations (no load, 10Hz)
100,000 operations (rated resistive load) 1800 operations/hour
FL1F - H12R CC FL1F - B12R CC
85 to 26 5V AC 100 to 25 3V DC
15 to 40mA (100V AC) 5 to 10mA (100V DC) 15 to 25mA (240V AC) 2 to 8mA (24 0V DC)
10ms Typ. (100 V AC/DC) 20ms Typ. (240V AC/DC)
4.6W (100V AC) 1.2W (100V DC)
6.0W (240V AC) 2.0 W (240V DC)
0 to 265 V AC 0 to 253V DC
< 40V AC < 30V DC
100V AC: 40ms (Typ.) 240V AC: 30ms (Typ.) 100V DC: 25ms (Typ.) 240V DC: 20ms (Typ.)
100V AC: 45ms (Typ.) 240V AC: 70ms (Typ.) 100V DC: 60ms ( Typ.) 240V DC: 75ms (Typ.)
2500V AC, 1 minute 500V DC, 1 minute
Resistive load 10A at 12/24V AC/DC 10A at 100/120V AC 10A at 230/24 0V AC
0.2A at 120V DC
0.1A at 240V DC Inductive load 2A at 12/24V AC/DC 3A at 100/120V AC 3A at 23 0/240V AC
0.2A at 120V DC
0.1A at 240V DC
External fuse required: 16A maximum
100mΩ ma ximum (at 1A, 24V DC)
10 million operations (no load, 10Hz)
100,000 operations (rated resistive load) 1800 operations/hour
4
EXPANSION I/O MODULE SPECIFICATIONS
Expansion I/O Module Type No.
Rated Power Voltage
Allowable Voltage Range
Rated Frequency
Current Draw
Allowable Momentary Power
Power Supply
Interruption
Power Consumption
Reverse Polarity Protection
Input Signal Input Points Isolation
Allowable Voltage Range
OFF Voltage
Operating Range
Turn ON Time
Input
Turn OFF Time
Analog Input Points
Analog Input Range
Digital Resolution Input Error
Input Impedance
Sampling Cycle
Wire Length
Output Signal Output Points/
Contact Conguration Isolation Dielectric Strength
(bet ween pow er/inpu t termin als and ou tput ter minals)
Output Voltage
Maximum Load Current
Output
Short-circuit Protection
Minimum Switching Load
Initial Contact Resistance
Mechanical Life
Electrical Life
Analog Output Points
Analog Output Range
Digital Resolution
Output Error (of full scale)
Output Impedance
Analog Value Conversion Interval
Wire Length
ON Voltage
OFF Current
ON Current
FL1F-M08 B1S2 FL1F- M 08B 2R2 FL1F - M08D 2R2 FL1F-M 0 8C2R 2 FL1F-J2B2 FL1F- K 2BM 2
24V DC 12/24V DC 24V AC/DC 100 to 240V AC/DC 12/24V DC 24V DC
20.4 to 28.8V DC 10.8 to 28.8V DC
50/60Hz (47 to 63Hz) 50/60Hz (47 to 63Hz)
15 to 40mA
1.0W
Yes Yes Yes Yes
DC input DC input AC/DC input AC/DC input Analog input
4 4 4 4
20.4 to 28.8V DC 10.8 to 28.8V DC < 5V DC < 5V DC < 5V AC/ DC < 40V AC < 30V DC
≥ 12V DC ≥ 8.5V DC ≥ 12V AC/DC ≥ 79V AC ≥ 79V DC — < 0.88mA < 0.88mA < 1.1mA
≥ 2.1mA ≥ 1.5m A ≥ 2.63mA
1.5ms (Typ.) 1.5ms (ty p.) 1.5ms (t yp.)
1.5ms (Typ.) 1.5ms (ty p.) 15ms (ty p.)
2
10 bits (0 to 1000) — — ±1.5% (of full scale)
— — 50ms
10 to 80mA (12V DC) 10 to 40m A (24V DC)
2 ms (typ.) (12V DC) 5 ms (typ.) (24V DC)
1.0W (12V DC)
1.0W (24V DC)
100m 100m 100m 100m
Transistor source output Relay output Relay output Relay output — 4 points (separate) 4NO contacts 4NO contacts 4NO contacts
Isolated Isolated Isolated
External power voltage (20.4 to 28.8V DC)
0.3A maximum
Built-in current limiting resistor: Approx. 1A
2 — — — 10 bits (0 to 1000) —
5 0ms (typ.)
2500V AC, 1 minute 500V DC, 1 minute
Resistive load 5A at 12/ 24V AC/DC 5A at 100/120V AC 5A at 230/240V AC
0.2A at 120V DC
0.1A at 240V DC Inductive load 2A at 12/24V AC/DC 3A at 100/120V AC 3A at 23 0/240V AC
0.2A at 120V DC
0.1A at 240V DC External fuse required: 16A maximum 10mA, 12V DC (reference value) 100mΩ ma ximum (at 1A, 24V DC) 10 million operations (no load, 10Hz) 100,000 operations (rated resistive load) 1800 operations/hour
20.4 to 26.4V AC
20.4 to 28.8V DC
20 to 100mA (24V AC) 8 to 50mA (24V DC)
5 ms (typ.) (24V AC/DC)
2.4W (24V AC)
1.2W (24V DC)
20.4 to 26.4V AC
20.4 to 28.8V DC
2500V AC, 1 minute 500V DC, 1 minute
Resistive load 5A at 12/ 24V AC/DC 5A at 100/120V AC 5A at 230/240V AC
0.2A at 120V DC
0.1A at 240V DC Inductive load 2A at 12/24V AC/DC 3A at 100/120V AC 3A at 23 0/240V AC
0.2A at 120V DC
0.1A at 240V DC External fuse required:
16A maximum 10mA, 12V DC
(reference value) 100mΩ ma ximum (at 1A, 24V DC) 10 million operations (no load, 10Hz) 100,000 operations (rated resistive load) 1800 operations/hour
85 to 26 5V AC 100 to 25 3V DC
10 to 30mA (100V AC) 10 to 20mA (240V AC) 5 to 15mA (100 V DC) 5 to 10mA (240V DC) 10ms (typ) (100V AC/DC) 20ms (typ.) (240V AC/DC)
3.5W (100V AC) 1.8W (100V DC)
4.8W (240V AC) 2.4W (240V DC)
85 to 26 5V AC 100 to 25 3V DC
< 0.05mA (AC) < 0.06mA (DC) ≥ 0.08mA (AC) ≥ 0.13mA (DC) 100V AC: 40 ms (t yp.) 240V AC: 30 ms (t yp.) 100V DC: 25 ms (typ.) 240V DC: 20 ms (t yp.) 100V AC: 45 ms (t yp.) 240V AC: 70 ms (t yp.) 100V DC: 60 ms (t yp.) 240V DC: 75 ms (t yp.)
2500V AC, 1 minute 500V DC, 1 minute
Resistive load 5A at 12/ 24V AC/DC 5A at 100/120V AC 5A at 230/240V AC
0.2A at 120V DC
0.1A at 240V DC Inductive load 2A at 12/24V AC/DC 3A at 100/120V AC 3A at 23 0/240V AC
0.2A at 120V DC
0.1A at 240V DC External fuse required:
16A maximum
10mA, 12V DC (reference value) — 100 mΩ maximum
(at 1A, 24V DC) 10 million operations (no load, 10Hz) 100,000 operations (rated resistive load) 1800 operations/hour
10.8 to 28.8V DC 20.4 to 28.8V DC
15 to 30mA 15 to 82mA
10ms (typ.) (12/24V DC) 10ms (typ.)
0.4W (12V DC)
0.8W (24V DC)
0 to 10V (max. rated input: 28.8 V) 0 to 20m A (max. rated input: 40m A)
76kΩ (0 to 10V) 250Ω (0 to 20mA)
10m (twisted-pair shielded cable)
Yes
2.0W
Voltage: 0-10V DC Current: 0-20, 4-20 mA
Voltage output: ±2.5% Current output: ±3% Voltage: 5kΩ min Current: 250Ω max
10m (twisted-pair shielded cable)
5
DIMENSIONS (All d imens ions in mm)
78.5+0.5mm
Base Module (with Display)
Base Module (with Display)
71.5
Base Module (without Display)
71.5
Base Module (without Display)
Expansion I/O Module
Mounting Hole Layout (Using Mounting Slides)
+0.2
+0.2
+0.2
53.5 -0.0
35.5 -0.0
90
98 +/- 0.3
55
60
+0.2 n x 35.5 -0.0
+0.2
35.5 -0.0
35.5 -0.0
+0.2
35.5 -0.0
+0.2
35.5 -0.0
Tex t D isplay
90
53
58
128.2
86
31.9
34.7
38.7
77.6
Expansion I/O Module
35.5
Note: Drawings are not to scale
(Panel Cutout)
Mounting clip
119.0+0.5mm
90
53
58
Gasket
Panel (thickness: 1.5 to 4mm)
Mounting screws (tightening torque:
0.15 to 0.2N·m)
Mounting clip
Loading...