IDEC RR2KP Series Catalog Page
Relays RR2KP Series
RR2KP Series — Magnetic Latching Relays
Key features of the RR2KP series include:
• Standard octal base (11-pin) termination
• Operates by pulse input and maintains condition even
during power failure
• Coils rated for continuous duty
• High vibration and shock resistance
• Excellent self-holding performance (magnetic latch)
• Optional manual check button for circuit testing
• DIN rail, surface, and panel mount sockets
available for a wide range of mounting applications
Contact Material
Contact Resistance
Minimum
Applicable Load
Operating Time
Maximum Continuous Applied Voltage (AC/DC) at 20°C
Minimum Set and
Reset Voltage at
20°C
Power Consumption
Insulation
Resistance
Dielectric Strength
Specifications
Frequency
Response
Temperature Rise
Vibration
Resistance
Shock Resistance
Life Expectancy
Operating
Temperature
Weight
Silver
30mΩ maximum (initial value)
5V DC, 100mA
25ms maximum
110% of the rated voltage
without overheating
80% of the rated voltage
AC: approximately 2.4VA (50Hz), 2.2VA (60Hz)
DC: approximately 1.5W
100MΩ minimum (with 500V DC megger)
Between live and dead parts: 1,500V AC,
1 minute
Between contact circuit and opposite coil:
1,500V AC, 1 minute
Between contact circuits: 1,500V AC,
1 minute (1,000V between NO-NC contacts)
1,800 operations/hour
Coil: 85°C maximum; Contact: 65°C maximum
0 to 6G (55Hz maximum)
100N (approximately 10G)
Electrical: over 500,000 operations (120V, 10A)
Mechanical: over 5,000,000 operations
–30 to +70°C
170g (approximately)
UL Recognized
File No. E66043
CSA Certified
File No.LR35144
Ordering Information
Order standard voltages for fastest delivery. Allow extra delivery time for
non-standard voltages.
Basic Part No. Coil Voltage:
RR2KP-U AC120V
E
Relays
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC E-27
RR2KP Series Relays
Part Numbers
Part Numbers: RR2KP Series
Termination Contact Configuration Standard With Check Button
P: 11-Pin DPDT RR2KP-U RR2KP-UC
Ratings
Coil Ratings
Rated Current ±15% at 20°C
Rated Voltage 60Hz 50Hz Coil Resistance ±10% at 20°C
6V 429mA 467mA 3.5Ω
12V 184mA 200mA 23.8Ω
AC
E
DC
Relays
24V 92mA 100mA 95Ω
120V 22mA 24mA 2,200Ω
240V 10.6mA 11.5mA 9,190Ω
6V 240mA 25Ω
12V 120mA 100Ω
24V 60mA 400Ω
48V 30mA 1,600Ω
110V 13.8mA 7,960Ω
Contact Ratings
Resistive Inductive
Voltage Nominal UL CSA Nominal UL CSA
30V DC 10A 10A 10A 7.5A 7A 7.5A
100V DC 0.5A — — 0.5A — 0.5A
120V AC 10A 10A 10A 7.5A 7.5A 7.5A
240V AC 7.5A 10A 10A 5A 7A 7A
2.Inductive load cos ø = 0.3, L/R = 7ms.
3.UL/CSA motor load rating 1/4 HP at 120V AC and 1/3 HP at 240V AC.
Applicable Sockets
Part Numbers: Sockets
Relay Snap DIN Rail Mount Finger-Safe DIN Rail Mount Panel Springs (optional)
RR2KP
SR3P-05
SR3P-06
1.See Section F for details on sockets. All DIN rail mount sockets shown above can be
mounted using DIN rail BNDN1000.
SR3P-05C SR3P-51
SR3P-06F3
SR3P-51F3
E-28 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
Loading...