IDEC PS5R Slim Line Series Technical Specifications

Power Supplies

Speciﬁcations

Part Numbers

12VDC output

24VDC output

Output Capacity

Input Voltage

(single-phase, 2-wire)

Input Current (typical)

Internal Fuse Rating

Input

Inrush Current (cold start)

100VAC 0.9A 1.7A 2.3A 1.8A 3.5A

200VAC 0.6A 1.0A 1.4A 1.0A 1.7A

PS5R-SC12 PS5R-SC24 PS5R-SD24 PS5R-SE24 PS5R-SF24 PS5R-SG24

30W 60W 90W 120W 240W

3.15A 3.15A 4A 4A 6.3A

Leakage Current (at no load)

Typical Efficiency

Output Current Ratings

12VDC 78% – – – –

24VDC 80% 83% 82% 84%

12VDC 2.5A – – – –

24VDC 1.3A 2.5A 3.75A 5A 10A

Voltage Adjustment Output Holding Time Starting Time Rise Time

–––650ms maximum 500ms maximum

100ms maximum (at rated input and output) 200ms maximum

Line Regulation

Output

Load Regulation Temperature Regulation

Ripple Voltage

Overcurrent Protection

2% peak to peak maximum (including noise)

105% or more, auto reset

Overvoltage Protection

Parallel Operation

No No No No No

Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature Operating Humidity Vibration Resistance Shock Resistance

EMC: EN61204-3 (EMI: Class B, EMS: Industrial), LVD: EN60950,

Approvals

Harmonic Directive (EN61000-3-2) Weight (approx.)

250g 285g 440g 630g 1000g

EN50178:1997, UL 1604, UL 508, UL1310 (PS5R-SC, -SD), c-UL (CSA 22.2 No. 14)

N/A EN61000-3-2 A14 class A

Terminal Screw IP protection Dimensions H x W x D (mm) Dimensions H x W x D (inches)

1. For dimensional drawings, see page L-7.

2. *Between input and output: 3000VAC, 1 minute; Between output and ground: 500VAC, 1 minute

95 x 36 x 108 115 x 46 x 121 115 x 50 x 129 125 x 80 x 149.5

3.74 x 1.42 x 4.25 4.53 x 1.81 x 4.76 4.53 x 1.97 x 5.08 4.92 x 3.15 x 5.89

––––

85 to 264 VAC,

100 to 370 VDC

50A maximum (at 200V AC)

0.75mA maximum 1mA maximum

10% (V. ADJ control on front)

20ms minimum (at rated input and output)

0.4% maximum

1.5% maximum 0.8% max

0.05% degree C maximum

103 to 110%, auto reset

120% min. SHUTDOWN

Between Input and Ground: 2000 VAC, 1 minute*

Between Input & Output Terminals: 100 M Ω Min

-10 to 60 ° C (14 to 140°F)

-25 to 75 ° C (-13 to +167°F)

20 to 90% relative humidity (no condensation, no freezing)

Frequency 10 to 55Hz, Amplitude 0.375mm

300m/s

3 times each in 6 axes

– SEMI F47

M3.5 slotted-Phillips head screw (screw terminal type)

IP20 ﬁngersafe

PS5R Slim Line Series

85 to 264V AC,

100 to 350V DC

1% peak to peak maximum (including noise)

105 to 130%, auto reset

Power Supplies

www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC L-5

PS5R Slim Line Series

Power Supplies

Temperature Derating Curves

PS5R-SC PS5R-SD, -SE, -SF PS5R-SG

100

90 80 70 60 50 40 30

Output Cuurent (%)

20 10

-10

0102030

Ambient Operating Temperature (ºC)

50 60 70

100

90 80 70 60 50 40 30

Output Cuurent (%)

20 10

-10

0102030

Ambient Operating Temperature (ºC)

All IDEC power supplies are listed to UL 508 which allows operation at 100% capacity inside a panel. This eliminates the need to use oversize power supplies or utilize two power supplies derated 50% of their rated output.

50 60 70

The charts above show that the PS5R Slim 30W/60W/90W (at 55ºC), 120W (at 40ºC), and 240W (at 45ºC) meet the ambient temperature required by the UL 508 and EN60950 standards to operate at an output current of 100%. The output current starts to derate beyond the required temperature.

100

90 80 70 60 50 40 30

Output Cuurent (%)

20 10

-10

0102030

Ambient Operating Temperature (ºC)

A Mounting B Mounting

Mounting Style A (standard)

Mounting Style B (Facing upward)

50 60 70

Condition Natural Air Cooling (Operating Temperature means temperature in surrounded PS5R.)

Make sure of convection in consideration of sufﬁcient heat radiation. Do not block the opening of the switching power supply.

Keep at least 20mm clearance around the switching power supply, except for the opening.

Vertical