IDEC PS5R Series Specifications

SPECIFICATIONS

5V DC output

Model

Output Capacity

Rated Input Voltage (Single-phase two-wire)*

Frequency

Input Current (Typ.)

Inrush Current (Typ.)

Input

Leakage Current

Efciency (Typ.) (at rated output)*

Power Factor (Typ.)

Rated Voltage/Current

Adjustable Voltage Range

Output Holding Time (Typ.) (at rated output)

Start Time (at rated input and output)

Rise Time (at rated input and output)

Input Fluctuation

Load Fluctuation

Output

Temperature Change

Regulation

Ripple (including noise)

Overcurrent Protection

Operation Indicator

Dielectric Strength

Insulation Resistance

Operating Temperature*

Operating Humidity

Storage Temperature

Storage Humidity

Vibration Resistance

Shock Resistance

Expected Life*

EMC

Safety Standards

Other Standard

Degree of Protection

Dimensions (mm)

Weight (approx.)

Terminal Screw

At normal temperature and humidity unless otherwise specied. *1: DC input voltage is not subject to safety standards. When using on DC input, connect a fuse to the input terminal for DC input protection. *2: Under stable state. *3: PS5R-VB05 (5V DC/2.0A) is 10W (Up to 3.0A at Ta = 0 to 40°C. Not subject to safety standards above 2.0A.) *4: See the output derating curves on page 3. *5: Calculation of the expected life is based on the actual life of the aluminum electrolytic capacitor. The expected life depends on operating conditions.

12V DC output

24V DC output

100V AC

230V AC

100V AC

230V AC

120V AC

230V AC

100V AC

230V AC

100V AC

230V AC

100V AC

230V AC

EMI

EMS

PS5R-VB05 - - -

PS5R-VB12 PS5R-VC12 - -

PS5R-VB24 PS5R-VC24 PS5R-VD24 PS5R-VF24

15W (5V Model is 10W) 30W 60W 120W 100 to 240V AC

(Voltage range: 85 to 264V AC/100 to 370V DC) (Load ≤ 80% at 100-105V DC) 50/60 Hz 5V: 0.25A

12V, 24V: 0.35A 5V: 0.14A

12V, 24V: 0.19A

0.7A 1.3A 1.4A

0.3A 0.8A 0.7A

18A (Ta = 25°C, cold start) 45A (Ta = 25°C, cold start)

0.5mA max.

1.0mA max. 5V: 77%, 12V: 82%, 24V: 84% 12V: 83%, 24V: 85% 86% 88% 5V: 73%, 12V: 80%, 24V: 81% 12V: 85%, 24V: 87% 86% 89% — — — 0.99 — — — 0.92 5V/2.0A*3, 12V/1.3A, 24V/0.65A 12V/2.5A, 24V/1.3A 24V/2.5A 24V/5A ±10% 5V: 53ms, 12V: 34ms, 24V: 36ms 5V: 330ms

12V: 215ms 24V: 230ms

12V: 13ms, 24V: 15ms 13ms 30ms

12V: 110ms 24V: 110ms

105ms 33ms

500ms max. 600 ms max. 800 ms max. 700 ms max. 5V, 12V: 200ms max.

24V: 250ms max.

200ms max.

0.4% max. 5V: 2.5% max.

12V, 24V: 1.0% max.

0.05%/C max. (-10 to +65C )

5V: 8% p-p max. (-25 to -10C) 12V: 6% p-p max. (-25 to -10C) 24V: 4% p-p max. (-25 to -10C)

5V: 5% p-p max. (-10 to +0C) 12V: 2.5% p-p max. (-10 to +0C) 24V: 1.5% p-p max. (-10 to +0C)

5V: 2.5% p-p max. (0 to +65C) 12V: 1.5% p-p max. (0 to +65C) 24V: 1% p-p max. (0 to +65C)

1.0% max.

12V: 0.05%/C max. (-10 to +50C) 24V: 0.05%/C max. (-10 to +55C)

12V: 6% p-p max. (-25 to -10C) 24V: 4% p-p max. (-25 to -10C)

12V: 2.5% p-p max. (-10 to +0C) 24V: 1.5% p-p max. (-10 to +0C)

12V: 1.5% p-p max. (0 to +50C) 24V: 1% p-p max. (0 to +55C)

0.05%/C max. (-10 to +55C ) 0.05%/C max. (-25 to +55C )

4% p-p max. (-25 to -10C) 4% p-p max. (-25 to -10C)

1.5% p-p max. (-10 to +0C) 1.5% p-p max. (-10 to +0C)

1% p-p max. (0 to +55C) 1% p-p max. (0 to +55C)

105% min. (auto reset) LED (green) Between input and output terminals: 3,000V AC, 1 minute

Between input and ground terminals: 2,000V AC, 1 minute Between output and ground terminals: 500V AC, 1 minute

Between input and output terminals: 100M min. (500V DC megger) Between input and ground terminals: 100M min. (500V DC megger)

–25 to +75°C

–25 to +70°C –25 to +65°C 20 to 90% RH (no condensation) –25 to +75°C 20 to 90% RH (no condensation)

10 to 55Hz, amplitude 0.33mm, 2 hours each

10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL6 end clips)

in 3 axes (when used with BNL6 end clips) 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL8 end clips)

300 m/s2 (30G), 3 times each in 6 directions

8 years minimum (at the rated input, 50% load, operating temperature +40°C, standard mounting direction) EN61204-3 (Class B) EN61204-3 (industrial) UL508 (Listing), UL1310 Class 2

ANSI/ISA-12.12.01 CSA C22.2 No. 107.1, 213, 223 EN60950-1, EN50178

SEMI F47 (at 208V AC input only) IP20 (EN60529) 90H × 22.5W × 95D 95H × 36W × 108D 115H × 46W × 121D 140g 150g 260g 470g M3.5

10 to 55Hz, amplitude 0.21mm, 2 hours each in 3 axes (when used with BNL6 end clips) 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL8 end clips)

UL508 (Listing) ANSI/ISA-12.12.01 CSA C22.2 No. 107.1, 213 EN60950-1, EN50178