New
Series
High Performance OI Touchscreens
Key Features
New 5.7” Color TFT LCD Displays •
12.1” HG4G
8.4” HG3G
New 8.4”, 10.4” and 12.1” Color TFT LCD Displays •
with Multi-Media
65,536 Color LCD•
High Resolution Display: •
800 x 600 (8.4”, 10.4”, 12.1”) , 640 x 480 (5.7”)
Super Bright: up to 800cd/m•
2
10.4” HG3G
5.7” HG2G
Mounts Portrait or Landscape•
Remote Access, Monitor and Control •
Audio and Video Interface (8.4”, 10.4”, 12.1”)•
Supports Expansion I/O Modules •
Serial, Ethernet and USB ports•
Display Specifications
5.7" 8.4" 10.4" 12.1"
Model HG2G-5FT22TF HG3G-8JT22MF HG3G-AJT22MF HG4G-CJT22MF
Display Type Color TFT LCD Color TFT LCD Color TFT LCD Color TFT LCD
Color Depth 65,536 65,536 65,536 65,536
Portrait or Landscape
Mounting
User Memory 12MB 12MB 12MB 12MB
Display Resolution 640W × 480H pixels 800W × 600H pixels 800W × 600H pixels 800W × 600H pixels
Backlight LED LED LED LED
Backlight Life *1
Brightness *2 800 cd/m
Brightness Adjustment 48 scales 48 scales 48 scales 48 scales
SD Card Slot √ √ √ √
MicroSmart Digital
I/O Cards Supported
Ehternet Port 1 RJ-45 1 RJ-45 1 RJ-45 1 RJ-45
USB Port 1 Type A & 1 mini-B 1 Type A & 1 mini-B 1 Type A & 1 mini-B 1 Type A & 1 mini-B
Serial Ports
Video In –
Audio In/Out – 3.5mm audio mini-jack (Stereo) 3.5mm audio mini-jack (Stereo) 3.5mm audio mini-jack (Stereo)
Remote Monitor
& Control
*1 The backlight life refers to the time until the surface brightness reduces by half after continuous use at 25°C.
*2 Brightness of the LCD only.
√ √ √ √
100,000 hours
²
2 4 4 4
2 (RS-232, RS-485,
RS-422 configurable)
√ √ √ √
100,000 hours min. 100,000 hours min. 100,000 hours min.
²
600 cd/m
2 (RS-232, RS-485,
RS-422 configurable)
Composite Video RCA connector
(NTSC or PAL)
2 (RS-232, RS-485,
RS-422 configurable)
Composite Video RCA connector
(NTSC or PAL)
700 cd/m
2
²
550 cd/m
2 (RS-232, RS-485,
RS-422 configurable)
Composite Video RCA connector
(NTSC or PAL)
General Specifications
5.7" 8.4" 10.4" 12.1"
Model HG2G-5FT22TF HG3G-8JT22MF HG3G-AJT22MF HG4G-CJT22MF
Rated Power
Voltage
Power Voltage
Range
Power
Consumption
Allowable
Momentary
Power Interruption
Inrush Current
Dielectric Strength
Insulation
Resistance
Operating
Temperature
Operating
Humidity
Storage
Temperature
Storage Humidity
Pollution Degree
Vibration
Resistance
Shock Resistance
Noise Immunity
Electrostatic
Discharge
Corrosion
Immunity
Degree of
Protection *1
Switching Element
Operating Force
Mechanical Life
Sound
Acknowledgement
Dimensions
Weight (approx.)
Approvals
Do not use the touchscreen in an environment subject to strong ultraviolet rays, otherwise the LCD quality will deteriorate.
*1 Protection degree of the front surface after mounting. Operation not guaranteed in certain environments.
10W maximum when not using USB interface
(USB2) or expansion module interface (EXT)
1 minute between power and FG terminals
10 M minimum between power and
FG terminals (500V DC megger)
10 to 90% RH (no condensation) 10 to 90% RH (no condensation) 10 to 90% RH (no condensation)
10 to 90% RH (no condensation) 10 to 90% RH (no condensation) 10 to 90% RH (no condensation)
5 to 8.4 Hz amplitude 3.5 mm,
8.4 to 150 Hz, acceleration 9.8 m/s
10 cycles (100 minutes) on each of three
5 shocks on each of three mutually
Power terminals: ±1 kV, Communication line:
±0.5 kV (IEC/EN61131-2: 2007)
ESD-3 (RH-1), Level 3 (Contact ±6 kV, air ±8 kV)
IP66 (IEC 60529) (front part when mounted)
167.2W × 134.7H × 54.4D mm 231W × 176H × 54.4D mm 270W × 212H × 52.7D mm 314W × 240H × 54.1D mm
Safety Standards: UL508, CSA C22.2 No.142
Ship Classification Standards: ABS, LR, NK
24V DC 24V DC 24V DC
20.4 to 28.8V DC 20.4 to 28.8V DC 20.4 to 28.8V DC
19W maximum
15W maximum when not using USB interface
(USB2) or expansion module interface (EXT)
10 ms maximum 10 ms maximum 10 ms maximum
30A maximum 30A maximum 30A maximum
1,000V AC, 10 mA,
1 minute between power and FG terminals
10 M minimum between power and
0 to +50°C (no freezing) 0 to 50°C (no freezing) 0 to +50°C (no freezing)
−20 to +60°C (no freezing) −20 to +60°C (no freezing) −20 to +60°C (no freezing)
2 2 2
2
10 cycles (100 minutes) on each of three
mutually perpendicular axes
147 m/s2, 11 ms
perpendicular axes
Fast transient/burst test,
Power terminals: ±2 kV, Communication line:
ESD-3 (RH-1), Contact ±6 kV, air ±8 kV
(IEC/EN61131-2: 2007)
Free from corrosive gases Free from corrosive gases Free from corrosive gases
IP66 (IEC 60529) (front part when mounted) Type 4X,
Type 4X, 13 (Pending)
Analog resistive membrane Analog resistive membrane Analog resistive membrane
3N maximum 0.55 to 2.3N 0.55 to 2.3N 3N maximum
1,000,000 operations 1,000,000 operations 1,000,000 operations
Electronic buzzer Electronic buzzer or speaker output Electronic buzzer or speaker output
0.65 kg 1.25 kg 1.65 kg 2.1 kg
Safety Standards: UL508, CSA C22.2 No.142,
CSA C22.2 No.213, ANSI/ISA-12.12.01-2007
Ship Classification Standards: ABS, LR, NK
25W maximum
1,000V AC, 10 mA,
FG terminals (500V DC megger)
5 to 8.4 Hz amplitude 3.5 mm,
8.4 to 150 Hz, acceleration 9.8 m/s2
mutually perpendicular axes
147 m/s2, 11 ms
5 shocks on each of three mutually
perpendicular axes
Fast transient/burst test,
±1 kV (IEC 61131-2: 2007)
(IEC 61131-2: 2007)
Type 13 (Pending)
18W maximum when not using USB interface
27W maximum
(USB2) or expansion module interface (EXT)
1,000V AC, 10 mA,
1 minute between power and FG terminals
10 M minimum between power and
FG terminals (500V DC megger)
5 to 8.4 Hz amplitude 3.5 mm,
8.4 to 150 Hz, acceleration 9.8 m/s2
10 cycles (100 minutes) on each of three
mutually perpendicular axes
147 m/s2, 11 ms
5 shocks on each of three mutually
perpendicular axes
Fast transient/burst test,
Power terminals: ±2 kV, Communication line:
±1 kV (IEC/EN61131-2: 2007)
ESD-3 (RH-1), Level 3 (Contact ±6 kV, air ±8 kV)
(IEC/EN61131-2: 2007)
IP66 (IEC 60529) (front part when mounted)
Type 4X, 13 (Pending)
Safety Standards: UL508, CSA C22.2 No.142
Ship Classification Standards: ABS, LR, NK
Touchscreen Part Numbers
121.0
+2.0
0
153.0
+2.0
0
50 120.0
152.540
40
40
35
55
49.4
167.2
134.7
※33.6
5.0
54.4
176.0
231.0
32.6
54.4
6.0 48.4
15.2
11.4
38.2
218.5
163.5
20
40
30
35
50
30
55
164.0
+2.0
0
219.0
+2.0
0
258.0
+2.0
0
200.0
+2.0
0
257.5
10
199.5
50
30
55
270.0
212.0
30.9
52.7
6.0 46.7
44.4
11.4
36.5
301.0
227.0
10
50
30
55
314.0
240.0
32.3
11.4
44.4
6.0
37.9
54.1
48.1
301.5
+2.0
0
226.5
+2.0
0
5.7" 8.4" 10.4" 12.1"
Light gray HG2G-5FT22TF-W HG3G-8JT22MF-W HG3G-AJT22MF-W –
Black HG2G-5FT22TF-B HG3G-8JT22MF-B HG3G-AJT22MF-B HG4G-CJT22MF-B
Silver HG2G-5FT22TF-S – – –
Dimensions (mm)
5.7” HG2G-5FT22TF 8.4” HG3G-8JT22MF
Panel Cut-out
Panel Cut-out
10.4” HG3G-AJT22MF 12.1” HG4G-CJT22MF
Panel Cut-out
Panel Cut-out
Accessories
Part Number Description
Programming Software SW1A-W1C Automation Organizer √ √ √
USB Maintenance Cable HG9Z-XCM2A USB Programming Cable USB-miniB (2m) √ √ √
Mounting Clip
Host Communication Plug
Replacement Battery HG9Z-XR1 Lithium battery CR2032 (one battery is supplied with HMI) √ √ √
USB Cable Lock Pin HG9Z-XU1 Used to lock USB cable (for USB2). √ √ √
USB panel-mount extension
cable
Memory Card HG9Z-XMS2 SD Memory Card (2GB) √ √ √
Protective Cover HG9Z-2E2 Use with 5.7” HMI. Covers entire front of HMI. (min. 3 pcs) √ - -
Protective Sheet *1
Expansion Module Clamp *2
L-shaped Terminal Block
Connector for I/O Module
Panel Mount Adaptor
*1 The protective sheet is UV resistant, however, resistance against direct sunlight in outdoor usage is not guaranteed.
*2 Use the expansion module clamp when using expansion modules.
Order the module clamp by referring to the width of the module shown in the dimensions of each module.
Note: When connecting more than 3 expansion modules to the HG3G/4G, note the limits shown below:
-Current flow rate at 5V: 130 mA max. Total width: 92.3 mm max.
-Current flow rate at 24V: 150 mA max.
SLD-K02 Replacement clips (min. 10 pcs) (4 pcs are supplied with HMI) √ - -
HG9Z-4K2 Replacement clips (min. 10 pcs) (4 pcs are supplied with HMI) - √ √
HG9Z-XT09V Replacement terminal block plug. (1 is supplied with HMI) √ - -
HG9Z-XT09 Replacement terminal block plug. (1 is supplied with HMI) - √ √
HG9Z-XCE11 For USB-A port (1m) √ √ √
HG9Z-XCE21 For USB-mini B port (1m) √ √ √
HG9Z-2D5 Use with 5.7" HMI. Sheet lays over LCD area. (min. 5 pcs) √ - -
HG9Z-3D8 Use with 8.4” HMI. Sheet lays over LCD area. (min. 2 pcs) - √ -
HG9Z-3DA2 Use with 10.4” HMI. Sheet lays over LCD area. (min. 2 pcs) - √ -
HG9Z-4DC Use with 12.1” HMI. Sheet lays over LCD area. (min. 2 pcs) - - √
HG9Z-XJ3 Short type for installing expansion I/O modules (Total width 17.6 to 41.1mm) √ √ √
HG9Z-XJ4 Long type for installing expansion I/O modules (Total width 47 to 68.8mm) √ √ √
HG9Z-XJ5 Extra-Long type for installing expansion I/O modules (Total width 70.1 to 93.9mm) √ √ √
HG9Z-PMT10L For 10 pole MicroSmart I/O Module (min. 2 pcs) √ √ √
HG9Z-PMT11L For 11 pole MicroSmart I/O Module (min. 2 pcs) √ √ √
HG9Z-2A1 Adaptor for mounting HG2G to the panel cut-out of HG2F. √ - -
HG9Z-2A2 Adaptor for mounting HG2G to 156 x 123.5 mm panel cut-out (other manufacturer). √ - -
Applicable Model
5.7” 8.4” / 10.4” 12.1”
Loading...