K
Operator Interfaces
MicrO/I® HG4F Operator Interface
l
Dimensions & Panel Cutout
ey features of the HG4F include:
• 12.1” TFT LCD screen
• RS-232, RS-485 or RS-422 compatible
• Field replaceable backlight
• Alarm logging capability
• 256 colors
• Bar graphs and bitmap capability
• Trending capability
• Real time clock
• Ethernet and compact flash support
• CE marked, c-UL and UL listed
• UL1604 for hazardous locations
• Meets IP65 standards
• Programmable with WindO/I-NV2 software
MicrO/I
®
HG4F Series
Dimensions
257mm
270mm
K
Operator Interfaces
348mm
331mm
Installation Panel Layout
Panel
B
6mm
58mm
Mounting Clip
www.idec.com
A
A: 258mm + 1mm
B: 332mm + 1mm
Panel thickness: 2 to 5mm
HG4F
Mounting Clip
USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC K-5
K
MicrO/I
®
HG4F Series
Standards
Electrical
Environmental
General Specifications
Structural
Noise
Operator Interfaces
MicrO/I® HG4F Specifications
Safety Standards UL508, UL1604, CSA C22-2, No. 213, CE,
EMC Standards IEC/EN61131-2, IEC/EN 61000-6-4, IEC/EN61000-6-2, CE
Rated voltage 24V DC
Voltage variation range 80 to 120% of the rated voltage (including ripple)
Power consumption 25W maximum (at the rated voltage)
Momentary Power Interruption 10ms maximum, Level: PS-2
Inrush current 15A maximum (cold start)
Dielectric strength AC 1500V 10mA, 1 minute (between power terminals & FG)
10 M
Ω
Insulation resistance
Operating temperature range 0 to 50°C (no freezing)
Operating humidity range 20 to 85% RH (no condensation)
Storage temperature -20 to 60°C (no freezing)
Storage humidity 20 to 85% RH (no condensation)
Vibration resistance 10 to 55Hz 9.8m/s2 (2 HRS in each axis X, Y and Z) (IEC 60068-2-6)
Shock resistance 147 m/s2 (5 times each axis X, Y and Z) (IEC 60062-2-27)
Altitude
Pollution Degree Pollution degree 2 (IEC60664-1)
Degree of protection IP66, NEMA 4, 4X, and 13 (front of panel)
Exterior Dimensions (W x H x D) 348mm x 270mm x 58mm
Panel Cutout Dimensions (W x H) 332mm +1 x 258mm +1
Weight Approx. 3.4kg
Electrostatic Discharge
Electromagnetic Field
Fast Transient Burst
Withstandability
Damped Oscillatory Wave Serial mode power supply: ± 1kV IEC/EN 61000-4-12
Surge Immunity turning on electricity 500V between L-FG IEC/EN 61000-4-5
Radiated Emission IEC/EN 61000-6-4
minimum (500V DC megger)
(Between power terminals and FG)
0 to 2000m (operation)
0 to 3000m (transport) (IEC 61131-2)
ESD-3 (RH-1) Level 3
Contact ±6kV Air ±8kV
10V/m 0.27M to 500MHz
10V/m AM80% 80M to 1000MHz
Common mode: Level 3
Power supply: ±2kV
Communication line: ±1kV
IEC/EN 61000-4-2
IEC/EN 61000-4-3
IEC/EN 61000-4-4
Device
Operator Interfaces
Backlight
Graphic Display
Display Specifications
K-6
Display 12.1" TFT 256-Color LCD
Number of Pixels 800 (W) x 600 (H)
Pitch 0.3075 x 0.3075 mm
Element life 66,400 hours minimum
Backlight Cold cathode tube (Field Replaceable)
Backlight life 50,000 hours minimum
Graphics Line, polyline, rectangle, circle, arc, pie, ellipse, polygon, bitmaps, paint
Lines Solid, dotted, dash, long dash, dotted, long dotted
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC
Operator Interfaces
Part Numbers
Part Numbers: MicrO/I
Item
Color HG4F screen
Color HG4F screen
WindO/I-NV2 Software
Part Numbers: MicroO/I
Part Number Description Connection
HG9Z-XCM1A Programming cable for HG2F /3F/4Fseries (from PC to HG3F) RS-232
HG9Z-3C115A Cable between IDEC Micro3/MicroSmart (FC4A-PC2) PLC and HG2F /3F/4F - 5 ft RS-485
HG9Z-3C125A Cable between IDEC Micro3C/ONC/MicroSmart (port2) PLCs and HG2F /3F/4F - 5 ft RS-232
FC4A-KC2CA Cable between IDEC MicroSmart (port 1 or 2) and HG2F /3F/4F - 5 ft RS-232
HG9Z-2C145A Cable between IDEC Micro3C/ONC/MicroSmart (RS485) PLCs and HG2F /3F/4F - 5 ft RS-485
HG9Z-3C135A Cable between Mitsubishi A series or Omron (link) and HG2F/3F/4F - 5 ft RS-232
HG9Z-3C145A Cable between Mitsubishi A series (direct or link) and HG2F /3F/4F - 5 ft RS-232
HG9Z-3C155A Cable between Omron C Series and HG2F/3F/4F - 5 ft RS-232
HG9Z-2C125A Cable between AB-SLC503/504 and HG2F /3F/4F - 5 ft RS-232
HG9Z-2C135A Cable between AB-Micrologix series and HG2F /3F/4F - 5 ft RS-232
HG9Z-2C155A Cable between Siemens S7-200 series and HG2F /3F/4F - 5 ft RS-232
®
HG4F
Part Number Description
HG4F-JT22TFW HG4F Color 12.1” operator interface
HG4F-JT22TFW-DH485-500 HG4F Color 12.1” operator interface with Allen Bradley DH485 for SLC 500 PLCs
HG9Y-ZSS2W
®
HG2F/3F/4F Cables
Configuration software for HG Series O/Is except for HG1X
(includes Communication drivers for non-IDEC PLCs)
MicrO/I
®
HG4F Series
HG4F Drivers (included with software)
• IDEC
• Allen Bradley
• Omron
• Mitsubishi
• Siemens S7-200
• MODBUS-RTU
• Keyence
• GE- Fanuc (SNPX)
• Aromat
More drivers available, visit www.idec.com/usa.
HG4F Drivers
K
Operator Interfaces
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC K-7
MicroO/I® Accessories Operator Interfaces
Accessories
HG1B Accessories
Part Number Description
HG9Z-XK Mounting brackets for HG1B series (1 per pack)
HG2F/3F/4F Accessories
HG2F HG3F HG4F
HG9Z-2D2
(5 sheets per pack)
HG9Z-2K1P
(1 piece per pack)
HG9Z-2B1 HG9Z-3FB HG9Z-4FB Replacement Backlight
HG9Z-2G1 HG9Z-2G1 HG9Z-2G1 O/I Communication Link Unit
HG9Z-2P101 HG9Z-3P102 HG9Z-3P102 Digital I/O Expansion Unit
– HG9Z-MF32 HG9Z-MF32 Compact Flash Card (32MB)
HG9Z-3DAPN02
(2 sheets per pack)
HG9Z-4K1PN10
(10 pieces per pack)
HG9Z-4DAPN02
(2 sheets per pack)
HG9Z-4K1PN10
(10 pieces per pack)
Protective Sheet
Mounting Clip
K
Obsolete Replaced By
HG2A-SS22BF
HG2A-SS22JF
HG2A-SB22BF
HG2A-SB22JF
HG1A-SB32BF
HG1A-SB32BF
Operator Interfaces
Obsolete Parts
HG2F-SS22VFHG2A-SS22CF
HG2F-SB22VFHG2A-SB22CF
HG1B-SB22WF
K-18 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC
Loading...