IDEC BNH Series, BN Series Catalog Page
Terminal Blocks
BNH/BN
BNH/BN Series
Key features:
• Touch-down terminals with spring-loaded captive screws
• Jumpers available up to 50A model
• Fuse block with or without blown-fuse indicator in neon or LED
• Mounts on 35mm standard DIN rail
UL Recognized
File No. E78117
CSA Certified
File No. LR64803
File No. R9551701
J9551516 (power blocks)
R9650688 (dual-deck blocks)
Specifications
Model BNH10W BNH15MW BNH15LW BNH30W
Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
Appearance
Width 0.275” (7mm) 0.315” (8mm) 0.413” (10.5mm) 0.472” (12mm)
Approvals UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV
No. of Poles 1 1 1 1
Wire Sizes 22 to 16 AWG 22 to 14 AWG 22 to 14 AWG 18 to 10 AWG
Voltage/Current 600V / 10A 600V / 10A 600V / 15A 600V / 30A
Terminals
Mounting 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail
Terminal
Torque
End Plate BNE15W BNE15W BNE15W BNE30W
DIN Rail Stop BNL-5 BNL-5 BNL-5 BNL-5
Dust Cover BNC230 BNC230 BNC230 BNC230
Marking
Strip
Ring Terminal Jumpers BNJ16 BNJ26W BNJ46 BNJ56
Fork Terminal Jumpers BNJ16F BNJ26FW BNJ46F BNJ56F
Size M3 M3 M3.5 M4
Type Touch-down Touch-down Touch-down Touch-down
(N-m) 0.6 - 1.0 0.6 - 1.0 1.0 - 1.3 1.4 - 2.0
(in-lbs.) 5.3 - 8.9 5.3 - 8.9 8.9 - 11.5 12.4 - 17.8
PVC BNM7 BNM7 BNM7 BNM7
Fiberglass BNM9 BNM9 BNM9 BNM9
End clip BNM3 BNM3 BNM3 BNM3
1. BNDN1000 aluminum DIN rails are available in 1 meter lengths.
2. Marking strips are sold in 1 meter lengths.
3. Most jumpers are provided with 6 poles (except for BNH50W jumper that is 2-poles only).
4. Remove the “H” in the terminal block part number for standard screw type (ex. BNH10W becomes BN10W).
BNH/BN
Switches & Pilot LightsSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
BNH/BN
Terminal Blocks
Terminal Blocks
Specifications, continued
Model BNH50W BN75W BN150W BNDH15W
Appearance
Width 0.610” (15.5mm) 0.787” (20mm) 1.024” (26mm) 0.315” (8mm)
Approvals UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV
No. of Poles 1 1 1 2
Wire Sizes 16 to 6 AWG 16 to 4 AWG 16 to 0 AWG 22 to 14 AWG
Voltage/Current 600V / 50A 600V / 75A 600V / 150A 600V / 10A
Terminals
Mounting 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail, surface
Terminal
Torque
End Plate BNE50W BNE75W BNE150W BNDE15W
DIN Rail Stop BNL-5 BNL-6 BNL-6 BNL-8
Dust Cover BNC320 BNC420 BNC520
Marking
Strip
Connecting Rods — — —
Connecting Nuts — — — BNN1 (2 pieces)
Base Mount Brackets — — — BNDL2
Ring Terminal Jumpers BNJ62 (2 pole) — — BNJ26
Fork Terminal Jumpers — — — BNJ26FW
Size M5 M6 M8 M3
Type Touch-down Hex bolt Hex bolt Touch-down
(N-m) 2.6 - 3.7 3.9 - 5.4 10 - 13.5 0.6 - 1.0
(in-lbs.) 23.1 - 32.8 34.6 - 47.9 88.8 - 119.8 5.3 - 8.9
BNC230 (top level)
BNC240 (bottom Level)
PVC BNM7 BNM7 BNM7 BNM7
Fiberglass BNM9 BNM9 BNM9 BNM9
End clip BNM3 BNM3 BNM3 BNM3
BNR1 10.34” (265mm)
BNR2 19.69” (500mm)
1. BNDN1000 aluminum DIN rails are available in 1 meter lengths.
2. Marking strips are available in 1 meter lengths.
3. Most jumpers are six poles (except for BNJ62 which is 2 poles only).
4. Remove the “H” in the terminal block part number for standard screw type (ex. BNH50W becomes BN50W).
Loading...