IDEC AP Series Catalog Page
Key features:
Long service life, low maintenance
•
Space saving miniature style
•
Dome or fl at lens models
•
Built-in current-limiting resistor
•
Five illumination colors: red, green, amber, yellow, and white
•
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Transformer (120V AC and 240V AC) and DC-DC Converter (110V DC)
•
options on 12mm and 16mm units
Miniature ø8-16mm AP Series
AP Series — Miniature Pilot Lights
Miniature Pilot Lights
CSA Certifi ed
File No. LR21451
*AP8/AP1 series only.
UL Recognized
File No. E55996
Specifi cations
Lamp Built-in LED with current limiting resistor
Operational Voltage
Current Ratings
Operating Temp. -20ºC to +55ºC
Operating Humidity 45 to 85% RH
Insul. Resistance
Rev. Withstand Voltage
Solder Terminal Soldering 260ºC maximum (5 sec.)
Degree of Protection
5, 6, 12, 24VDC (full voltage),
110/120, 220/240VAC, (with transformer)
110VDC (with converter)
AP8: 5V DC/9mA, 12V DC/9mA, 24V DC/9mA, 12V AC/15mA, 24V AC/15mA
AP1: 5V DC/9mA, 12V DC/9mA, 24V DC/9mA, 12V AC/15mA, 24V AC/15mA
AP2: 6V DC/33mA, 12V DC/22mA, 24V DC/11mA
AP6: 6V DC/33mA, 12V DC/22mA, 24V DC/11mA
100MΩ min. (500V DC megger)
Between live and dead parts
AP2/AP6: 100V
AP1/AP8: 200V
AP8: IP40 (dustproof)
Other Series: IP65 (oiltight)
*
Optional Adaptors/Converters
Transformer DC-DC Converter
Applicable Units AP2 & AP6 (with 6V LED only)
Operating Voltage
Power Consumption 1.6 VA maximum 1W maximum
Insulation Voltage 250 V AC 140V DC
Insulation Resistance 10MΩ min. (500V DC megger) Between live and dead parts
Dielectric Strength
Available as one piece only (replacement LEDs are not available).
Circuit Breakers
110/120VAC 50/60 Hz
220/240VAC 50/60 Hz
2,000V AC, 1 minute Between live/dead parts
2,000V AC, 1 minute Between terminals
110V DC (90 to 140V DC)
2,000V AC, 1 minute Between live/dead parts
1,500V AC, 1 minute Between terminals
442
Miniature Pilot Lights
Miniature ø8-16mm AP Series
AP Miniature Pilot Lights - ø8 & ø10mm
Appearance Lens Style Operating Voltage Part Numbers
AP8 Series - Ø8mm
AP1 Series - Ø10mm
1. In place of k, specify the color code.
2. For dimensions, see page 445.
3. For accessories, see page 444.
AP Miniature Pilot Lights - ø12 & ø16mm
Appearance Lens Style Operating Voltage Part Numbers
AP2 Series - Ø12mm
AP6 Series - Ø16mm
Miniature Pilot Lights
Dome
Flat
Dome
Flat
Dome
Flat
Dome
Flat
5V DC +/- 5%
12V AC/DC +/- 10%
24V AC/DC +/- 10%
5V DC +/- 5%
12V AC/DC +/- 10%
24V AC/DC +/- 10%
5V DC +/- 5%
12V AC/DC +/- 10%
24V AC/DC +/- 10%
5V DC +/- 5%
12V AC/DC +/- 10%
24V AC/DC +/- 10%
6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP8M255-k
AP8M211-k
AP8M222-k
AP8M155-k
AP8M111-k
AP8M122-k
AP1M255-k
AP1M211-k
AP1M222-k
AP1M155-k
AP1M111-k
AP1M122-k
AP2M266-k
AP2M211-k
AP2M222-k
AP2M166-k
AP2M111-k
AP2M122-k
AP6M266-k
AP6M211-k
AP6M222-k
AP6M166-k
AP6M111-k
AP6M122-k
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks
k Color Codes
Color Code
Amber A
Green G
Red R
Blue S*
Warm White W
Cool White PW
Yellow Y
k Color Codes
Color Code
Amber A
Green G
Red R
Warm White W
Yellow Y
1. In place of k, specify the color code.
2. For dimensions, see page 445.
3. For accessories, see page 444.
Optional Transformers and DC-DC Converters (for AP2 and AP6 only)
Appearance Style Voltage
Transformer
DC-DC Converter
1. Optional Transformers and DC-DC converters snap onto the back of AP2 or AP6 pilot lights.
2. Transformers and DC-DC Converters step down to 6V.
3. For dimensions, see page 445.
110/120V AC
220/240V AC
110V DC
(90–140V DC)
Part Numbers
Used with AP2 Series Used with AP6 Series
AP2-0126D
AP2-0246D
AP2-016DD AP6-016DD
AP6-0126D
AP6-0246D
Circuit Breakers
443
Loading...