IDEC AP22M Series Data Sheet

ø22mm Ultra-bright LED Pilot Lights - AP22M Series

Key Features

•Viewable in direct sunlight.

•Visible from all directions.

•The use of an ultra-bright LED that is not susceptible to external scattered light ensures high visibility and provides for more accurate recognition.

•Integrated terminal cover is IP20 (finger protection), preventing electrical shocks.

•UL and c-UL listed, EN standard compliant.

• Colored and clear lenses are offered.

• UL Type 4X

Specifications

Operating Temperature

Storage Temperature

Operating Humidity

Insulation Resistance

Over Voltage Category

Impulse Dielectric Strength

Pollution Degree

Dielectric Strength

Vibration		Operation limit
Resistance		Damage limit
Shock		Operation limit
Resistance		Damage limit
Degree of Protection
Terminal Size
Tightening		Terminal Screw
Torque		Locking Ring
Wire Size
Weight (approx.)

−25 to +55ºC (no freezing)

−45 to +80ºC (no freezing)

45-85%RH (no freezing)

100MΩ (DC500V megger) II (IEC60664-1)

2.5kV (IEC60664-1, IEC60947-5-1) 3 (IEC60947-5-1)

between terminals of different poles: 2,000V AC, 1 min between live and non-live parts: 2,000V AC, 1 min

5-55Hz half amplitude: 0.5mm 30Hz half amplitude: 1.5mm 100m/s2 (10G)

1000m/s2 (100G)

Panel front: IP66 (IEC 60529), UL Type 4X Terminals: IP20

M3.5 screw

1.0N•m

2.0N•m

AWG16 ~ AWG14, 2 wires max. 18g

LED Lamp Ratings

Rated Voltage	12V DC, 24V DC*
Voltage Range	12V DC ±5%, 24V DC ±10%*
LED Illumination Color	Red (R), Green (G), Yellow (Y), Amber (A), Blue (S), and White (PW)
Rated Current	12V DC: R, A, Y - 21mA; G, S, PW - 22mA
	24V DC: 24mA (all colors)
LED Life (Ref.)	Approx. 30,000 Hrs. at rated voltage @ 25ºC in specified environmental conditions (The brightness reduces to 50% of initial value.)
	Colors R, A, and Y	Colors G, S, & PW	Drawing Key
	X1	X1	LED Chip
Equivalent Circuit			Rectifier Diode
			Zenner Diode
	X2	X2	Resistor

*Other voltages to be announced.