IDEC A6 Accessories Catalog
16mm A6
Switches & Pilot Devices
Accessories
Appearance Description Used With Part Number
Ø 5/8” (16mm) units MT-001
Locking Ring
Wrench
Made of metal. Used for tightening plastic locking ring during
installation. Tightening torque should not exceed 3kgf-cm
Ø 31/64” (12mm) AP2M units MT-002
Ø 13/32” (10mm) AP1M units MT-003
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Lens Removal Tool
Lamp Holder Tool
Switch Guard
Terminal Cover
Dust Cover
Adaptor Socket
Mounting Hole Plug
Replacement
LED Lamps
Made of metal. Used for removing lens or button from the
housing
Made of rubber. Used for removing and replacing LED lamps
in illuminated units
Prevents inadvertent switch operation. IP40 dust-tight.
90 degrees opening maintained
Prevents inadvertent switch operation. IP65 oiltight
180 degrees opening, spring return
Made of translucent nylon. Fits over and shields the terminals All 5/8” (16mm) units AL-V6
Fits over the lens or button to provide extra protection from
dust (not applicable for oversize lenses or buttons).
Plug-on terminal adaptor with solder terminals
Plug-on terminal adaptor with PCB terminals AL-C6V
Fills unused panel cutouts. Made of nitrile rubber. Push-in
installation from front of panel. IP65 (oiltight).
Fills unused panel cutouts. Made of aluminum. Screw-on
locking ring from inside of panel. IP65 (oiltight).
Round Mounting Hole Plug
Square Mounting Hole Plug LA9Z-BS7
Rectangular Mounting Hole Plug LA9Z-BS8
LED with built in current limiting resistor (with all
illuminated assemblies).
All pushbuttons and pilot lights MT-101
All illuminated pushbuttons and pilot
lights
Round/Square AL-K6
Rectangular AL-KH6
Round/Square AL-K6SP
Rectangular AL-KH6SP
All round units AL-D6
All square units AL-DQ6
All rectangular units AL-DH6
All 5/8” (16mm) units
Rubber AL-B6
Aluminum AL-BM6
Plastic (Applicable for fl ush mount
switches only)
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
OR-77
AL-C6
LA9Z-BS6
LATD-5 k
LATD-6 k
LATD-1 k
LATD-2 k
Replacement
Locking Ring
Anti-Rotation Ring
Replacement
Engraving Inserts
Replacement Keys
Circuit Breakers
1. In place of k specify color code. A=Amber, G=Green, Y=Yellow, R=Red, S=Blue, W=Warm White, JW=Cool White.
2. LEDs include built-in current limiting resistor and reverse polarity protection diode.
466
Fastens operators to panel (included with
all operators).
Prevents rotation of switches in panel
(included with all operators).
Engraving plates to allow legends underneath translucent
lenses (included with all lenses).
Pair of keys (#132).
All key switches use same standard key.
www.idec.com
All switches & pilot lights HA9Z-LN
All switches & pilot lights AL6-LP
Round standard AL6M-W
Square standard AL6Q-W
Rectangular standard AL6H-W
Round oversize AL6M-MW
Square/rectangular oversize AL6Q-QW
All key selectors AS6-SK
Switches & Pilot Devices
16mm A6
Appearance Description Used With Part Number
Pushbuttons, pilot lights, illuminated
ø24mm round, metal (aluminum color), panel cut-out ø20.2mm
pushbutton, selector switches, key
selector switches and illuminated selector switches.
LA9Z-SM61
ø24mm round, plastic (black), square panel cut-out ø20.2mm LA9Z-S61B
Flush Bezel
A6 Switch
+
24mm square, plastic (black), panel cut-out 20.2 x 20.2mm LA9Z-S71B
Flush Bezel
=
Flush Switch
LA9Z-S81B
Switch Guard
w/ Flush Bezel
(spring return)
24 x 30mm rectangular, plastic (black), rectangular
panel cut-out ø20.2 x 26.2mm
Rectangular, plastic (black) LA9Z-KS8
Schematics — A Series: 5/8” (16mm)
Terminal Arrangement (Top View)
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks
(TOP)
NC1
NO1
Lamp
Terminal (+)
C1
SPDT Contact
(Single-pole/Double Throw)
Non-illuminated Pushbuttons and
Illuminated Pushbuttons
(TOP)
NC1
NO1
Lamp
Terminal (–)
Lamp
Terminal (+)
C1
DPDT Contact
(Double-pole/Double Throw)
NC2
NO2
C2
Lamp
Terminal (–)
(Single-pole/Double
Selector Switches Pilot Lights
(TOP)
NC1
NO1
C1
SPDT Contact
Throw)
NC1
NO1
C1
DPDT Contact
(Double-pole/Double
IDEC’s Superbright LED Internal Circuits
LATD-1,-2,-6 (GS) LATD-5 (ARWY)
LED Chip
Protective Diode
Zener Diode
(TOP)
NC2
NO2
C2
Throw)
Lamp
Terminal (+)
(TOP)
Lamp
Terminal (–)
LATD-1,-2,-6 (ARWY) LATD-5 (GS)
USA: 800-262-IDEC Canada: 888-317-IDEC
Circuit Breakers
467
Loading...