Ideal Networks NaviTEK NT User Manual
NaviTEK NT
Copper and Fibre Network Troubleshooter
Proof of Performance
NaviTEK NT
Network Troubleshooter
The NaviTEK NT is a network tester for troubleshooting and maintenance
of active and passive copper and fibre networks. Incorporating an
improved graphical interface NaviTEK NT allows network technicians
to pinpoint and solve network connectivity issues faster than ever
before. Subsequently, tests can be saved as pdf reports and shared with
colleagues and clients using the free IDEAL AnyWare™ app.
Addressing the needs of today’s network technicians
Today, network technicians have a broad selection of software troubleshooting
tools at their disposal and whilst useful in certain situations and environments they
do have limitations. NaviTEK NT on the other hand oers a comprehensive suite of
test and troubleshooting functionality only found on dedicated hand-held testers:-
• Copper and fibre test interfaces
• Fast detection of link and IP information including duplex, speed, port ID,
VLAN, DNS, DHCP, Gateway status and IP address
• Detects services such as ISDN, POTS and PoE
• Accurate wire mapping including length measurement and distance to fault
• Rugged, compact design permits use in confined spaces
• Not susceptible to virus and malware attack
Port & network
summary info
Press the Autotest button to
display summary information
and allow for detailed inspection
of network parameters.
CDP/LLDP/EDP port
information
VLAN detection
& operation
Automatic detection of VLAN ID’s
allows the user to configure NaviTEK NT
for operation on a VLAN.
Netscan
Ethernet utilisation
Real time display of broadcast network
trac shown as a percentage of port
speed for the previous 60 minutes.
Network Probe
Show port information using Cisco
Discovery Protocol (CDP), Link Layer
Discovery Protocol (LLDP) and
Extreme Discovery Protocol (EDP).
Display list of IP and MAC addresses of
every device connected to the network.
View network illustration to
verify test results of each
network component.
Loading...