Ideal Lighting CREE Lighting WIM User Manual

Installation Instructions

Part Number

Description

Revision A

January 2019

SmartCast®Wireless Integration Module

Available Part Numbers

WIM-CMA-OEM SmartCast Wireless Integration Module

Purpose of Document

This document is intended to provide fixture manufacturers with the information needed to properly integrate the
SmartCast®Wireless Integration Module controls with their fixtures in order to provide a SmartCast®enabled fixture that
can integrate with the SmartCast Intelligence Platform™.

Table of Contents

Driver Connection..........................................................................................................2

Physical Mounting Considerations ..............................................................................2

Dimensions...................................................................................................................2

Fascia Plate..................................................................................................................2

Mounting Features .......................................................................................................3

Orientation....................................................................................................................3

Keep Out......................................................................................................................4

Wiring Considerations..................................................................................................4

Packaging.......................................................................................................................4

FCC .....................................................................................Error! Bookmark not defined.

2

Product Overview

The SmartCast® Wireless Integration Module (WIM) is a modular system intended to be mounted onto an existing light
fixture or be mounted directly into the ceiling and leverage Cree’s SmartCast™ technology to automate setup, drive data
acquisition, enable remote control, and provide energy savings for the user.

Driver Connection

The SmartCast® Wireless Integration Module is designed to be used with drivers with an integrated self-powered DALI
connection to power the controls module and provide digital communications to the driver.

DALI-

DALI+

120 – 277VAC

Physical Mounting Considerations

**3D Step models for the SmartCast Wireless Integration Module are available upon request. It is recommended that the

models are used to ensure seamless integration.

Dimensions

**Dimensions in mm

Fascia Plate

The SmartCast Wireless Integration Module is equipped with snaps on the sides of the module to allow the
designer/integrator to design a custom fascia plate that creates a seamless, aesthetic look for any application.

Design Considerations: it is important that the sensor and button holes are maintained in order to ensure full functionality
of the reset button, environmental sensor, PIR and ALS. Use the example fascia models for appropriate sizing and
alignment.

CREE CONFIDENTIAL AND PROPRIETARY

WIM – RevA (January 2019)