IDEAL Industries SignalTEK CT Sales Brochure
Proof of Performance
TOUCHSCREEN
NOW WITH
SignalTEK CT
Data Cable Transmission Tester
Proof of Performance
SignalTEK CT
Data Cable
Transmission Tester
Proof of Performance
Autotes t from re mote un it
for one p erson testin g
If you install or maintain data cabling, SignalTEK CT allows you to generate
PDF test repo rts that prove installed links run at Gigabit Ethernet transmission
rates.
For installers, this means having a cost-eective way to demonstrate the
cabling is installed correctly and supports any Ethernet application running
at up to 1 Gb/s. By proving real world performance, SignalTEK CT documents
the quality of an installation - reducing the risk of call backs.
SignalTEK CT also gives network owners the assurance that network cabling
will support critical services like VoIP, IP CCTV, control systems, and video
streaming anywhere Ethernet is deployed; from a small residential, retail or
commercial LAN to industrial plants, enterprise and campus networks.
Today’s challenge
The foundation of all Ethernet networks is the physical cabling. Systems that
were never thought of as “data networks” are quickly migrating from analog
communication to digital data transmission, integrating Ethernet into nearly all low
voltage systems. Network cabling installed into harsh environments may become
more susceptible to disruption from external interference as well as faulty cabling
or terminations. These physical layer problems can reduce throughput by causing
dropped data frames, slowing the network as it retransmits lost data resulting in
poor performance for users.
To avoid performance issues, today’s installers and technicians must not only verify
correct wiring but also stress-test a link to confirm its ability to transmit at maximum rate.
Tomorrow’s solution
Replaceable RJ45
contacts
SignalTEK CT proves a link ’s ability to provide error-free performance at full Gigabit
speeds by performing a complete physical termination and data transmission test.
With a quick Autotest, SignalTEK
across the link and reports any transmission errors against performance criteria
defined by the IEEE 802.3ab Gigabit Ethernet Standard. Just 1 bit of corrupt or lost
data among the 10 billion bits transmitted will fail the performance standard.
SignalTEK
identify and locate any physical problem, such as an errant nail, screw, or unseen
conduit burr. SignalTEK
than a pair, speeding the process of locating and correcting the problems.
SignalTEK
with test results backed up by an internationally recognized standard. But unlike
those costly certifiers, it is so easy to use that even the most novice technician can
test a complete cabling plant or troubleshoot a single link quickly and accurately.
CT performs a complete installation test with TDR fault detection to
CT will identify faults to the individual conductor rather
CT oers the same peace of mind provided by complex cable certifiers
CT transmits a full 10 Gb of data bi-directionally
Loading...