1. Measure existing door width and height in feet and inches.
This determines the size of door needed. The rough opening
should be the same size as the door.
Width: ____________________ Height: ____________________
2. Measure for sideroom: 3 3/
installation of the vertical track for standard extension or torsion
springs, or EZ-SETTorsion Spring.
Sideroom: __________________
3. Measure area labeled “headroom”— distance between the top of
the door opening (“jamb header”) and the ceiling (or first
obstruction, ex: light fixture). 11" is required for standard
installation of extension springs; 12" on standard torsion springs
and EZ-SETTorsion Spring. If you have restricted headroom,
special hardware is available. Low headroom hardware is available
to reduce requirement to as low as 4
extension spring). EZ-SETTorsion Spring low headroom
requirement is 91/2". Note: If door height extends above the
opening, the headroom measurement should be adjusted accordingly.
Existing headroom: ___________
Headroom needed: ___________
4. Measure area labeled “backroom”—distance is measured from the
garage door opening toward the back wall of the garage.
Backroom: __________________
Common garage door widths include 8', 9', 16' and 18'. Common garage door
heights include 7' and 8'. See Menards Team Member for additional size availability.
NOTE: On 8' and 9' wide doors, a reinforcement strut must be
purchased if an automatic garage door opener is installed.
The majority of homes today have automatic garage door openers.
Therefore, Ideal doors do not include a lock. If desired, an easy-to-install,
heavy-duty, keyed lock is available.
/16", 1/2" & 9/16" Sockets and Ratchet
Drill with 3/16", 5/32", 3/8" & 7/16" drill bits
Two short pieces of rope about 4' in length
Locking Pliers or C Clamps
Tw o
3
/8" Open-end Wrench (Torsion Spring Only)
All tools may be purchased in Hardware Dept.
4. BACKROOM
3. HEADROOM
HEIGHT
WIDTH
FLOOR
TORS ION
SPRING
11 "
141/2"
61/2"
n/a
1
/2" x 18" Winding Bars (Torsion Springs only)
12 "
151/2"
10 "
7"
EZ-SET®
TORSION SPRING
12 "
14"
91/2"
n/a
2.
RIGHT
SIDE
SIDEROOM
33/4"
33/4"
6"
6"
RESIDENTIAL
RESIDENTIAL
GARAGE DOORS
GARAGE DOORS
Steel Panel DoorsCarriage House Doors
All steel used in this
product is 100% recyclable
at the end of its useful life.
Ideal Door
1-800-621-3667
Ideal Dooris a brand of Clopay Building Products.
Clopay Building Products Company, Inc. 2008
A Griffon Company, Inc. Printed in U.S.A.
In the interest of better quality and value, we are continually improving
and updating our products. Consequently, photos, illustrations and
available options may sometimes differ from present models.
Complete Garage
Door Selection
REID-CH-RESIBR-08
DO-IT-YOURSELF INSTALLATION AS EASY AS 1-2-3
EZ-SET® TORSION SPRING SYSTEM
WITH EZ-SET® TORSION SPRINGS, IDEAL DOORS ARE EASY TO INSTALL
• Standard spring wire gauge (gapped) and a large spring diameter of 1
assure dependable performance.
1
Stack the Sections & Attach Hardware
2
Assemble the Track
3
Wind the Spring
PAINTING AND STAINING YOUR DOOR TO COMPLEMENT YOUR HOME
How to Paint your Steel Door:
• Clean door surface to remove any loose material
or dirt.
• Paint with a high quality 100% acrylic latex exterior
grade paint.
• Simply use a brush or roller to apply paint.
Doors have a woodgrain texture so paint
application marks seemingly disappear.
NOTE:Carriage House Custom Crafted Steel
doors may be painted any color except black or
colors with a light reflective value (LRV) lower
than 8.
• Galvanized springs are cleaner, more attractive and can last up to 50% longer
than oil tempered springs.
• Unlike conventional torsion spring installations, the torsion load is transmitted
through the flag brackets and into the jambs, eliminating the time-consuming
process of preparing the anchor pad and mounting the load-bearing center brackets.
• Die cast aluminum drums (not plastic) provide exceptional durability and
ensure long life.
EZ-SET® SPRING KEY FEATURES
Saves time and money. Lets you easily and
safely install heavy-duty torsion springs.
Eliminates the difficult and dangerous
manual winding process used in
conventional torsion spring installations.
3
/4"
help
Ideal Door® strongly recommends that a professional
garage door installer remove existing torsion springs.
Adjust spring tension in seconds
using a power drill.
User-friendly 45º drill input angle
typically allows do-it-yourselfers to
stand safely on the floor to wind and
adjust springs.
How to Stain your Wood Door:
• Select a high quality exterior oil-based penetrating
stain that is mildew resistant, UV resistant and
water repellent.
• Clean door surface to remove any loose material
or dirt.
• Apply stain to all door section surfaces.
• Fill any gaps or voids on surface with a clear
silicone caulk.
NOTE: Paint grade doors cannot be stained.
Complete staining instructions are found in
installation manual.
How to Paint your Wood Door:
• Fill any gaps or voids on wood surfaces with a
paintable caulking compound.
• Clean all door surfaces with a stiff bristle brush.
• Prime the door per the installation instructions.
(Priming is also available from Ideal Door )
• Paint all door section surfaces using a high quality oil
or latex-based exterior paint.
®.
NOTE: Complete painting instructions are found in
installation manual.
RESIDENTIAL GARAGE DOOR
RESIDENTIAL GARAGE DOOR
LINEUP
LINEUP
STEEL PANEL GARAGE DOORS
Three garage door construction options provide a perfect door for any home.
• 5-STAR PREMIUM VALUE – Three-layer construction provides superior
strength, quietest operation and the best energy efficiency.
• 4-STAR SELECT VALUE – 24 gauge steel with vinyl-backed insulation creates
a durable and energy-efficient door.
• 3-STAR SELECT VALUE – Our non-insulated entry level door is built with
durable steel.
CARRIAGE HOUSE STAMPED STEEL
Carriage House styles available in three steel construction options.
• PREMIUM VALUE STAMPED STEEL– Three-layer construction with short
and long Carriage House emboss designs create a beautiful, strong and
energy-efficient door.
• SELECT VALUE STAMPED STEEL– An insulated 24 gauge steel Carriage
House door with short and long emboss designs is a durable and energy efficient option.
• STANDARD VALUE STAMPED STEEL– A dependable non-insulated
door with a short emboss design is our entry level Carriage House offering.
CARRIAGE HOUSE CUSTOM CRAFTED STEEL
Authentic Carriage House designs in virtually maintenance-free four-layer
construction provides exceptional beauty, durability and energy efficiency.
With eleven door designs, six window styles and two insulation thicknesses to
choose from, this is the best steel Carriage House door available.
• “MX” Models – 2" Insulation with insulated glass in all windows standard,
this is the choice for the energy conscious.
• “MF” Models – 13/8
CARRIAGE HOUSE CUSTOM CRAFTED WOOD
Authentic Carriage House designs in a traditional wood construction. With
Semi-Custom and Fully-Custom options to chose from, this is the way to
improve curb appeal with the classic look of wood.
• SEMI-CUSTOM DOORS– With five wood types, six panel designs and many
windows to choose from, this product is far from limited in selection.
• FULLY-CUSTOM DOORS– By selecting an existing design example
or creating a completely new look, this product is limited only by
your imagination.
" Insulation provides another energy-efficient option.
pg. 1pg. 2
5-STAR PREMIUM VALUE – our very best raised
panel doors – offer maximum performance and superior
insulation. A solid sandwich construction of
2" or 1
insulation pressure bonded between two steel skins
provides the ultimate in durability, strength and energy
efficiency. Quieter than other insulated and non-insulated
doors, 5-Star doors are the best choice for homes with
rooms adjacent to or above the garage. Available in
beautiful elegant raised, elegant ranch and flush panel
designs, these doors offer long-lasting beauty and
exceptional value. All standard width 5-Star doors
include an operator reinforcement bracket for easy
and convenient installation.
Limited lifetime warranty on paint system
with a 3-year limited warranty on hardware.
MODEL
M4RSF
I
M
I
L
LIFE
LIFE
TIME
TIME
W
A
R
R
4-STAR SELECT VALUE doors offer durable
construction with the choice of two panel designs.
Available with insulation nestled against a layer of
steel, these doors are quieter and more energy
efficient than non-insulated doors. Our Ranch panel
design gives your home a unique and stylish look
Raised Panel
Insulated Steel Door with
Woodgrain Exterior Finish
T
E
D
S
T
Y
E
E
T
N
A
L
+
I
L
N
U
S
MODEL
M6RST
M
I
L
10
10
YEAR
N
O
I
T
A
YEAR
W
A
R
R
3-STAR STANDARD VALUE doors offer
dependable construction and quality features at a
truly affordable price. A rust-proof aluminum
retainer with a vinyl floor seal helps keep out the
elements. Available in raised panel or deep ribbed
designs, these doors are built to last.
while our raised panel design offers traditional good
looks. 4-Star doors are a good choice for homes that
require durability and insulation.
MODELSMODELS
Detail
M4RSF – Raised Panel DesignM2RSF – Ranch Long Panel Design
Detail
M6RST – Raised Panel DesignM5EST – Deep Ribbed Design
Raised Panel
Steel Door with
Woodgrain Exterior Finish
T
I
E
D
Y
T
N
A
S
T
E
Detail
L
E
Detail
White
SandtoneBrown
Almond
Due to the printing process, colors may vary. Please request an accurate color chip.
DESIGNER WINDOWS
DESIGNER CLASSICS
Charcoal Flame
WROUGHT IRON
OrleansTuscanyOrleans RanchTuscany Ranch
DESIGNER ETCHINGS
Prism
Brass Flame
®
Spectrum
Charcoal Heritage
Crystal
Brass Heritage
RANCH PANEL / DESIGNER CLASSICS
Charcoal Flame Ranch
RANCH PANEL / WROUGHT IRON
RANCH PANEL / DESIGNER ETCHINGS
Prism Ranch
Brass Flame Ranch
Spectrum Ranch
DECORATIVE INSERTS
(Insulated glass standard on 2" thick doors.)(Insulated glass standard on 2" thick doors.)
" enviromentally-safe
polystyrene backer creates a
dent-resistant, quiet door.
Limited lifetime warranty on
paint system with a 3-year
limited warranty on hardware.
One sheet of durable (25 gauge)
steel.
10-year limited warranty on
paint system with a 1-year
limited warranty on hardware.
COLORS
White
Brown
*Sandtone
Due to the printing process, colors may vary. Please request an accurate color chip.
*Almond
*Not available on
Model M5EST
DECORATIVE INSERTS
FOR RAISED PANEL DOORS (M4RSF and M6RST)
SunriseSherwood
Williamsburg (Double Doors Only)
These inserts simply snap outside or inside our plain windows.
Cathedral
Stockton
FOR RANCH PANEL DOORS (M2RSF)
Williamsburg (Double Doors Only)
These inserts simply snap outside or inside our plain windows.
Williamsburg Ranch (Double Doors Only)
Stockton RanchSherwood Ranch Sunrise Ranch
These inserts simply snap outside or inside our plain windows.
pg. 3pg. 4
C
arriage
HOUSE
PREMIUM VALUE
STAMPED STEEL –
best Stamped Steel Carriage House doors – offer maximum
performance, impressive appearance and superior insulation.
Constructed with 2" or 13/8
between two steel skins, these doors provide the ultimate in
durability, strength and energy efficiency. Quieter than other
insulated and non-insulated doors, Premium Value
Stamped Steel doors are the best choice for homes with
rooms adjacent to or above the garage. Available in
two Carriage House emboss designs, short and
long. To further accentuate the Carriage House
appearance, these doors come standard with
beautiful decorative hardware. Standard size
doors also include an operator reinforcement
bracket for easy and convenient installation.
MODELS
MR2SP – 2" Insulation
MR1SP – 13/8
(Short Panel)
" Insulation
" insulation pressure bonded
MR2LP – 2" Insulation
MR1LP – 13/8
" Insulation
(Long Panel)
our very
u
r
t
s
n
o
C
r
e
y
a
L
-
3
t
c
Steel
o
i
n
Polystyrene
Insulation
MODEL
MR1SP
Steel
Stamped Steel Short Panel
Insulated Steel Sandwich Door
with Woodgrain Exterior Finish
CONSTRUCTION
Sandwich style, two sheets of steel (27 gauge
exterior / 29 gauge interior) wrapped around a
2" or 13/8
Limited lifetime warranty on paint system with a
3-year limited warranty on hardware.
LIFE
W
A
T
I
E
M
D
I
L
LIFE
TIME
TIME
R
N
R
A
arriage
C
HOUSE
MODEL
MR4LV
n
o
i
t
c
u
r
t
s
n
o
C
r
e
y
a
L
-
2
15/16" Polystyrene
Insulation
Stamped Steel Long Panel
Insulated Steel Door with
Woodgrain Exterior Finish
Durable
24 Gauge
Steel Skin
LIFE
W
A
I
T
M
E
I
L
TIME
R
N
R
A
MODEL
MR5S
n
o
i
t
c
u
r
D
Y
T
t
s
n
o
C
r
e
y
a
L
-
1
Durable
25 Gauge
Steel Skin
SELECT VALUE STAMPED STEEL
doors provide a Carriage House appearance
with the added benefit of insulation. These doors are quieter and
Y
T
more energy efficient than non-insulated doors. Available in two
Carriage House emboss designs, short and long. To further
dependable construction at an affordable price. These doors
offer a Carriage House short emboss design and come standard
with beautiful decorative hardware.
Stamped Steel Short Panel
Steel Door with
Woodgrain Exterior Finish
STANDARD VALUE STAMPED STEEL
doors provide a Carriage House appearance with
C
L
YEAR
W
A
arriage
HOUSE
T
I
E
M
I
D
10
Y
T
R
N
R
A
accentuate the Carriage House appearance, these doors come
standard with beautiful decorative hardware.
MODELSMODELS
Note: Long Panel Design not available on
Standard Value Stamped Steel.
MR4SV – 1
5
/16
" Insulation
MR4LV – 1
(Short Panel)
CONSTRUCTION WARRANTIESCONSTRUCTIONWARRANTIES
One sheet of thick (24 gauge) steel
with a 1
5
/16
" enviromentally-safe
polystyrene backer creates a
dent-resistant, quiet door.
Limited lifetime warranty on
paint system with a 3-year
limited warranty on hardware.
5
/16
" Insulation
(Long Panel)
MR5S
(Short Panel)
One sheet of durable (25 gauge)
steel.
10-year limited warranty on
paint system with a 1-year
limited warranty on hardware.
COLORSWINDOWS
White
Almond
Sandtone
Short Plain
ARCH3 Plain
(Double Car Doors Only)
SELECTION GUIDE
SOLID
(NO WINDOWS)
SHORT SOLID
Short Panel Design
LONG SOLID
SHORT PLAIN
LONG PLAIN
SHORT SQ. INSERT
LONG SQ. INSERT
WINDOW OPTIONS
(SINGLE AND DOUBLE CAR)
LONG REC. INSERT
Long Plain
ARCH1 PLAIN
ARCH1 INSERT
Short Square
Insert
Long Square
Insert
ARCH3 Insert
(Double Car Doors Only)
ARCH2 PLAIN
ARCH2 INSERT
Long Rectangle
WINDOW OPTIONS
(DOUBLE CAR ONLY)
ARCH3 PLAIN
ARCH3 INSERT
Insert
ARCH1 Plain
Short
Wrought Iron
(NO WINDOWS)
SHORT SOLID
LONG SOLID
Long Panel Design
ARCH1 Insert
Wrought Iron
SOLID
Long
SHORT PLAIN
LONG PLAIN
ARCH2 Plain
ARCH
Wrought Iron
SHORT SQ. INSERT
LONG SQ. INSERT
ARCH2 Insert
WINDOW OPTIONS
(SINGLE AND DOUBLE CAR)
LONG REC. INSERT
DECORATIVE HARDWARE
STANDARD
Spade Step Plate
ARCH1 PLAIN
ARCH1 INSERT
Spade Lift
Handles
(1 pair)
ARCH2 PLAIN
ARCH2 INSERT
OPTIONAL
Strap Hinge
Keylock
Escutcheon
Plates
WINDOW OPTIONS
(DOUBLE CAR ONLY)
ARCH3 PLAIN
ARCH3 INSERT
Short Wrought IronLong Wrought IronARCH Wrought Iron
Short Wrought IronLong Wrought IronARCH Wrought Iron
Note: Long Panel Design not available on Standard Value Stamped Steel.
pg. 5pg. 6
C
arriage
HOUSE
CUSTOM CRAFTED STEEL
• Choice of 11 Carriage House panel designs.
• Choice of 8 window/top section options.
• Virtually maintenance-free construction.
• Modern upward acting operation
with stylish old world charm.
• EZ-SET® Torsion Springs
standard on most sizes.
• Available in 2 door thicknesses,
2
"
base door or 1
(2" base door standard with
insulated windows when
windows are ordered.)
*Overlay available in White only on all base door colors. Door and overlay can be
painted any color except black or colors with a light reflective value (LRV) lower than 8.
Painting doors with colors lower than LRV 8 will void warranty.
Almond
Almond
Sandtone
Sandtone
PANEL DESIGNS/MODELS
SERIES 1
MX11/MF11MX12/MF12 MX13/MF13
SERIES 3
MX31/MF31
SERIES 2
MX21/MF21
MX22/MF22
MX23/MF23
MX34/MF34 MX35/MF35
MX32/MF32
/8" Insulation – MF Models
PANEL DETAILS
Beveled Coped Edge
MX33/MF33
Custom Crafted Steel Carriage House doors
are designed with decorative center grooves
and stylish beveled coped edges.
Center Groove
WINDOW/TOP SECTION OPTIONS
Solid
REC13
ARCH1 (Solid)
REC14
ARCH3
• Series 3 models are not available with windows.
• Actual solid top section designs may vary based on model chosen.
See door images on next page for more details.
• Base door contains 2" or 1
(2" base= 9.0 R-Value) (1
• Overlay is made of
5
/8" thick custom composite material.
/8" thick polystyrene insulation.
3
/8" base= 6.5 R-Value)
• Commercial grade 14 gauge steel hinges for long-lasting performance.
• High-cycle nylon rollers for quiet operation.
• Bottom weatherseal in rust-proof, aluminum retainer.
STYLE AND FINISH
• Base door has a natural woodgrain texture, painted with a baked-on
primer and polyester top coat.
• Overlay in White only with a detailed beveled, coped edge.
1
• All windows are double strength
/8" clear glass with removable
beveled overlay grille for easy cleaning. (2" base door includes
insulated windows.)
• EZ-SET
®
Torsion Springs are STANDARD on most doors; see Millwork
Team Member for specific details.
ARCH1 SOLIDARCH1 SOLID
SOLID
MX33 / MF33
ARCH1 SOLID
SIZES
• Four-section doors available in 6'6", 7', 7'6" and 8' heights only.
• Heights are determined using a combination of 18" and/or
24" sections.
• Available in 8', 9', 10', 12', 15', 15'5", 16' and 18' widths.
• Series 2 Models MX22/MF22 and MX23/MF23 and Series 3 Models
MX34/MF34 and MX35/MF35 are not available in 12' widths.
SPECIAL NOTES
• An automatic garage door opener (minimum
1
/2 HP)
is recommended.
• 15" radius track standard. 14" of headroom is required plus 3"
for a garage door opener. Interior slide lock standard.
• Door and overlay can be painted any color except black or colors
with a light reflective value (LRV) lower than 8.
Painting doors with colors lower than LRV 8 will void warranty.
• Modern upward acting operation with
stylish old world charm.
• Semi-Custom or Fully-Custom Options
to choose from.
SEMI-CUSTOM DOORS
• 5 Wood types to choose from.
• 6 Carriage House panel options to
complement your home.
• Over 10 window/top sections to
choose from.
n
o
C
r
e
y
a
L
-
2
d
e
t
f
a
r
c
d
n
a
H
Interior wood provides beauty
and a double layer of protection
Traditional rail and stile construction
SEMI-CUSTOM SELECTION GUIDE*
SolidARCH3ARCH1ARCH4SQ23SQ24REC13REC14
1
Design
2
Design
c
t
u
i
o
r
t
n
s
Decorative
exterior panels
W
T
I
M
I
L
1
1
YEAR
YEAR
A
R
A
R
3
Design
E
D
4
Design
Y
T
N
5
Design
SEMI-CUSTOM WOOD TYPES
Hemlock
Wood TypeWood Type
Grade of
Grade of
Woo d
Woo d
Model
Model
Number*
Number*
*Blank space “_” represents design number shown below.
Important Note: Door must be painted or stained according to installation
instructions prior to installation in order to avoid voiding warranty.
StainStain
MH_HMH_HMC_CMC_CMR_RMR_RMH_PMH_PMH_GMH_G
CedarCedarRedwoodRedwood
StainStainStainStainPaintPaintPaintPaint
HemlockHemlockHemlockHemlock
Hemlock
Grooved
Grooved
OPTIONAL CENTER GROOVE
Center grooves can be applied ONLY
to 8" center stiles:
• 6' to 9' wide door = 1 groove per door.
• 9'2" to 14' wide door = 2 grooves
per door.
Detail
• 14'2" to 18' wide door = maximum of
3 grooves per door.
SEMI-CUSTOM DESIGNS
Design 1
Design 2Design 3
Design 4Design 5Design 6
SEMI-CUSTOM WINDOW OPTIONS
Single Car Options
ARCH 1
Double Car Options
ARCH 1
ARCH 8
ARCH 3ARCH 4REC13REC14SQ23SQ24
ARCH 2ARCH 6
SQ23
ARCH 3
SQ24
ARCH 4
REC13REC14
DECORATIVE HARDWARE
StandardOptionalDecorative
Locking
Option
Keylock
Spade Step
Plate
Spade Lift Handles
(1 pair)
Decorative Handle
with Keyhole (1 pair)
Fleur de Lis
Handle (1 pair)
Lion’s Head
Door Knocker
Ring Door
Knocker
Spade Strap Hinge
Fleur de Lis
Step Plate
Door Stud
Fleur de Lis
Strap Hinge
Escutcheon
Plates
6
Design
SEMI-CUSTOM PRODUCT INFORMATION
WOOD SELECTIONS
• Wood stiles and rails are available in Hemlock, Cedar or Redwood.
• Stain grade Hemlock, Cedar and Redwood Doors are constructed
with edge-glued panels. Paint grade Hemlock doors are
constructed with plywood panels.
• The doors can be painted or stained (the paint grade doors
cannot be stained) to complement your home.
• Factory priming is available.
MAINTENANCE & CARE
• Proper care and maintenance are imperative to the
appearance, longevity and performance of a Carriage House
Premium Wood door.
• Prior to installation it is required that the door (outside, inside
and all edges) be primed and painted with a high quality
exterior paint or stained with a penetrating stain that is mildew
and UV resistant and water repellent.
finish door will void warranty.
Failure to properly
FULLY-CUSTOM DOORS
POPULAR CUSTOM DESIGNS
Example 1Example 2Example 3
(Or Create Your Own)
*Note: Only single car designs shown
SIZES
• Standard widths are 8', 9', l0', I5', 15'6", 16' and 18' (non-standard
widths are available in 2" increments from 6' to 18'). Door heights
are 6'6" (3 sections), 7' (3 sections), 7'6" (4 sections) and 8'
(4 sections).
• Design 5 not available in 6'6" height and Design 6 not available in
9'2" up to I4' widths.
• Not all panel and window designs are available in all section
widths and heights. (See Millwork team member for details.)
SPECIAL NOTES
• An automatic electric garage door opener (minimum
1
/2 HP)
is recommended.
• 15" radius track standard. 14" of headroom is required plus 3"
for a garage door opener.
• 14" of headroom is required for installation plus 3" for a garage
door opener.
WARRANTY
• Limited 1-year Section and Hardware Warranty.
• Choose existing, modify existing
or create an original design.
• You can design a window for your
custom door.
• Windows are made from
1
/8"
double pane glass.
• Each door is individually quoted
and made custom per order.
• Design must be approved prior
to production.
• Contact Ideal Door customer
®
service for complete details.
T
I
E
M
D
I
L
5
5
YEARYEAR
W
Y
T
A
R
N
R
A
pg. 9pg. 10
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.