datacomm
www.ideali nd.com • 1-800-435-0705 customer assi stance
Crimpmaster™ Ratcheting Crimp Tool
• Ratcheting tool frame ensures full crimp cycle
• Provides a consistent crimp every time
• Dies change quickly and easily with a screwdriver
• Tool frame works with all IDEAL Crimpmaster™ Die Sets
• Cushioned, comfort-grip handles
Description Cat. No.
Crimpmaster™ Crimp Frame Tool (Die set not included) 30-506
™
Crimpmaster
Tools and Die Sets
30-556 Tool w/die N/A
RJ-11 Crimp Tool for two, four or six-position modular plugs
30-559 Tool w/die 30-522
RJ-45 CAT 5/5e Eight-position Crimp Tool for keyed or nonkeyed modular plugs
30-560 Tool w/die 30-521
RJ-45 Eight-position Crimp Tool for AMP
plugs
30-573 Tool w/die 30-481
Cambridge CP-88, CP-89 BNC/TNC coax connectors with
RG-58, RG-59/RG-62 AU cables (Hex 0.305 (7.75mm),
0.068 (1.73mm), 0.228 (5.79mm)
30-576
RG-174, Mini 59 BNC/TNC Connectors (Hex, 0.178
(4.52mm), 0.128 (3.25mm), 0.068 (1.73mm)
30-577 Tool w/die 30-482
N-Series and RG-8/11 Connectors (Hex, 0.429
(10.90mm), 0.100 (2.54mm), 0.080 (2.03mm)
30-578 Tool w/die 30-483
RG-59, RG-6, and 8281 50 and 75 OHM cables (Hex,
0.324 (8.23mm), 0.255 (6.48mm), 0.068 (1.73mm), 0.042
crim p tools/die sets
(1.07mm)
30-581 Tool w/die 30-502
RG-58, RG-59/62, BNC/TNC Coax Connectors (Hex,
0.255 (6.48mm), 0.213 (5.41mm), 0.068 (1.73mm)
30-582 Tool w/die 30-503
F-type CATV RG-59, RG-6 Connectors (Hex, 0.350
(8.89mm), 0.320 (8.13mm), 0.255 6.48mm)
®
RJ-45 modular
30-587 Tool w/die N/A
RG-58, RG-174 and G-8218 for both 50 and 75 ohm
cables (Hex 0.213 (5.41mm), 0.178 (4.52mm), 0.068
(1.73mm), 0.042 (1.07mm)
30-591 Tool w/die N/A
Plenum and Non-Plenum Thinwire Cables RG-58 and 59
(Hex, 0.213 (5.41mm), 0.190 (4.83mm), 0.068 (1.73mm),
0.042 (1.07mm)
30-593 Tool w/die N/A
Mini UHF and BNC/TNC 5 cavity (Hex, 0.052 (1.32mm),
0.068 (1.73mm), 0.100 (2.54mm), 0.213 (5.41mm), 0.255
(6.48mm)
30-572 Tool w/die N/A
16-26 AWG (1.31mm
rings, spade and butt splices
30-579 Tool w/die 30-500
22-10 AWG (.324mm
color coded nests
30-580 Tool w/die N/A
22-8 AWG (.3mm
non-insulated terminals
30-586 Tool w/die N/A
22-12 AWG (.324mm2 - 3.31mm2)
Non Insulated Open Barrel Connectors, Commercial Type
30-594 Tool w/die N/A
Fully Insulated quick disconnect terminals with thinner
wire barrels 22-10 AWG (.324mm
30-599 Tool w/die N/A
30-18 AWG (.205mm2 - 2.08mm2) Open Barrel Pins
and Sockets
2
- .128mm2) miniature insulated
2
- 5.261mm2) insulated terminals/
2
- 8mm2)
2
- 5.261mm2)
e-8
www.ideali nd.com • 1-800-435-0705 customer assi stance
Crimp-on F-Connectors
Nickel plated brass connectors designed for indoor coax terminations for video and other RF applications
• RG-59, RG-6, RG-6 Quad versions are available
• All versions require a hex crimp to secure cable to connector
• 1/4”x 1/4”cable prep for all models
• Crimp with 30-503 Crimpmaster™ Ratcheting Crimp tool
• Hex crimp sizes: RG-59 and RG-6, .320” cavity. RG-6 Quad, .350” cavity
Description Quantity Cat. No. Quantity Cat. No.
RG-6 F Crimp-on Coax Connector Card of 10 85-037 Card of 50 85-017
RG-59 F Crimp-on Coax Connector Card of 10 85-036 — —
RG-6 Quad F Crimp-on Coax Connector Card of 10 85-057 Card of 50 85-030
Twist-On F-Connectors
• After cable is 1/4 in. x 1/4 in. stripped, simply twist on connector
• No termination tool required
• Available in two styles, RG-6 and RG-59
Description Quantity Cat. No.
F-Type RG-6 Twist-On Connector
F-Type RG-59 Twist-On Connector
Card of 10 85-053
Card of 50 85-039
Card of 4 84-018
Card of 10 85-035
Connector Installation and Removal Tool
• Patented design works on BNC and F connectors
• Works on compression and hex connectors
• Comfort grip handle aids in installing and removing connectors on coax cable
• F-post for aid in cable to connector assembly
Description Cat. No.
F & BNC Coax Connector Tool - 8 in. 35-046
F & BNC Coax Connector Tool - 12 in. 35-042
Coax Strip & Crimp Tool
• Precision, form-ground stripping holes remove outer jacket and insulation from
RG-59 and RG-6 coaxial cable
• Durable blades cut copper-coated steel conductors
• Three crimping nests for crimping F-connectors and ring terminals
• Cushioned, comfort-grip handles
Description Cat. No.
Coax Strip & Crimp Tool 30-433
tools
DataComm
e-9
datacomm
www.ideali nd.com • 1-800-435-0705 customer assi stance
F-Type Adapters & Terminators
• Nickel-plated brass construction
• For 75Ω applications
Description Quantity Cat. No.
1GHz Female-to-Female F-Type Coaxial Adapter Card of 10 85-031
3GHz F-Splice Adapter, high bandwidth, for standard and high definition applications, <0.25dB insertion loss,
>25dB return loss
Female to RCA Male Adapter – converts female F-connectors to male RCA connectors Card of 2 85-936
RCA Female-to-Female Adapter Card of 2 85-937
Coax Cable F-Terminators - for all open ports on coax wall plates and splitters Card of 10 85-038
90° F-Adapter - F-female to F-male coax adapter Card of 2 85-070
Impact Punch Down Tools
• Insert and cut cable terminations effortlessly
• Adjustable high/low actuation setting accommodates termination requirements
• Turn-Lock™ Style blade holding design
• Impact-absorbing cushioned grip reduces operator stress for high volume installers
Card of 4 85-339
Card of 10 85-340
Description Cat. No.
Punchmaster™ II Punch Down Tool w/full 110 & 66 blades 35-485
Punch Down Tool Blades
Removable Blades Cat. No.
110 Turn-Lock™ blade 35-495
66 Turn-Lock™ blade 35-497
110/66 combo blade w/cutting edges 35-407
®
Krone
blade 35-478
®
Bix
blade 35-479
®
Bix
is a registered trademark of Nortel. Krone® is a registered trademark of Krone, Inc.
Ratchet Telemaster™ Modular Plug Crimping Tool
tools
• Heavy-duty version of the 30-496 Telemaster™ tool requires less user hand force
• Ratchet ensures full cycle crimping every time
• Crimps RJ-45 (8P8C) and RJ-11/12 (6P6C/6P4C) modular plugs
• Multi-function tool also cuts UTP/STP and strips CAT 5e/6 cable jacket and
flat cable jackets
• Black oxide coated steel frame with cushioned handles for strength and comfort
Description Cat. No.
Ratchet Telemaster™ 30-696
Replacement Cut & Strip Blade Set for 30-696 LA-4102
e-10
www.ideali nd.com • 1-800-435-0705 customer assi stance
Telemaster™ Modular Plug Crimping Tool
• Crimps RJ-45 (8P8C) and RJ-11/12 (6P6C/6P4C) modular plugs
• Multi-function tool also cuts UTP/STP and strips round CAT 5e/6 cable jacket
• Black oxide coated steel frame with contoured handles for strength and comfort
Description
Telemaster™ Crimping Tool RJ-45 and RJ-11/12 LB-1747 33-700* 30-496
*Kit includes 10 each, RJ-45 8P8C, RJ-11 6P6C and RJ-11 6P4C modular plugs.
Replacement Blade Kit Cat. No.
Tool Only Cat. No.
Data/Voice Crimp Tool Kit
• Compact design is 2/3 the size of traditional crimpers
• Fixed RJ-45 and RJ-11 crimp cavities
• One tool assembly process – cut, strip and crimp connectors on to CAT 3/5e/6 cables
• Black oxide coated steel core with spring loaded handle and locking feature
Description Cat. No.
Data/Voice Crimp Tool Kit includes ten RJ-11 (6P6C) and ten RJ-45 connectors 33-396
Telephone/Data Cable Splice and Repair Kit
• All in one specialty tool for crimping UR/UY/UB IDC splice connectors
• Features a parallel crimping surface to prevent damage to connectors during crimping process
• Two stripping holes for 22 to 24 AWG (phone/twisted pair) cables
• Cutter for cable and conductor trimming
• Plier nose for pulling and sorting wires in a box
Description Cat. No.
Kinetic® Super Wire Stripper/Crimper Kit – includes 25 IDC connectors (UR-I, 3-Wire Butt Splice) 33-719
Insulation Displacement Connectors
IDC connectors create fast splice and tap connections on solid copper wires.
Designed for low voltage telecommunication cables.
• Moisture-resistant sealant protects wires from corrosion
• Use with solid copper single-conductor wire
• Use 33-719 tool for proper crimping force and crimping angle
Description Quantity Cat. No.
UR-I, 3-Wire Butt Splice IDC 25 85-925
UR-I, 3-Wire Butt Splice IDC 100 86-925
IDC Combo Pack – includes 10 UR, 10 UY and 5 UB 25 85-960
UY-I, 2-Wire Butt Splice IDC 25 85-950
UB-I, 2-Wire Tap Splice IDC 25 85-900
85-950
85-90085-925
DataComm
tools
e-11
Loading...