IDEALI TD15 Instruction Manual

INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TD15-26437-700
* Please read these instructions carefully before operation this appliance.
When using electrical appliances, basics safety precautions should always be observed including the following:
- To protect against risk of electrical shock, do not put cord, plug, base or motor in water or other liquids.
- Never connect two or more appliances in the same plug.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".
- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
IMPORTANT SAFEGUARDS
INSTRUCTIONS FOR USE
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-
conneting to the main power outlet.
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari Duque de Caxias- RJ / Brasil - CEP 25243-150 Telefone: 55 21 2777- 8100 / Fax: 55 21 2777- 8106 e-mail: croydon@croydon.com.br - www.croydon.com.br
The pictures/drawings are illustrations. All data can be changed without notification.
TD15
TD15
TD15-26437-700
INDUSTRIAL BLENDER 15 LITERS
( TD15 )
INDUSTRIAL BLENDER 15 LITERS
( TD15 )
25
21
23
32
34
36
19
30
24
33
20
10 11
35
31
Item Code
Socket Assembly
37.371-4
2
3
4
12
14
9
5
6
7
5
13
15ltContainer
Assy.
37.357-5
1
Shaft Adapter
37
29
20 33
37.359-4
15 16
17
18
8
Stand
37.353-4
22
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
37.340-3
37.033-3
37.570-3
37.063-3
37.511-3
37.154-3
37.062-3
37.357-3
37.360-3 642 635
37.058-3
37.155-3
37.158-3
37.023-3
37.370-3
37.359-3
37.157-3
37.161-3 598
37.366-3
37.353-3 604 384
37.364-3
37.363-3
37.354-3
5.565-3
2.093-3
3.021-3 334
37.365-3 638
37.160-3
37.324-3 641
37.017-3
Description
Lid Nut Knife Retainer Underfriction Washer Bushing ( Chuck ) O’ring Container Base Washer 1/4” Nut Chuck Nut Shaft Elastic pin Polyurethane ring Elastic pin Shaft Adapter Screw Screw Press Washer Switch
Stand Nut Screw Fechamento da Base Spring Pedal Plug Cord Connection Rubber Protection Screw Motor Protector Plate Nut Special Screw 60 HZ Motor
Washer
Sleeving
Wiring Diagram
21
WHI
T
E
B AC
NG
L
K
1 3 2
4
29
REE
35
Technical Data
TD15-26437-700
Pedal
37.354-4
27
28
26
28
Voltage (V) Power (HP)
Amperage (A)
Speed (rpm) Capacity (l) Weight (Kg/lbs)
Dimension WxHxD (cm/in)
220 (60 Hz) 1
7.0 3500 15
17.5/38.5 30/11.9 x 108/42.6 x 56.5/22.3
Loading...