IDEALI TD10 Instruction Manual

TD10

TD10

TD10-16345-700

INSTRUCTION MANUAL

INDUSTRIAL BLENDER - TD10-16345-700

* Please read these instructions carefully before operation this appliance.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be observed
including the following:

- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.

- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.

- Never connect two or more appliances in the same power outlet.

- When not in use, unplug the blender.

- Avoid starting blender empty.

- Avoid contact with moving parts because blades are sharp. Handle carefully.

- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be

used but only when blender is "NOT RUNNING".

- Only remove the container when blender "COMPLETELY STOPPED".

INSTRUCTIONS FOR USE

- Blender control is made by switch ( ON - OFF)

- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.

- To start blender place small quantity of food before connecting it, and afterwards complete
container.

- When blender is running do not remove the lid.

- If blender action stops, turn blender off. Remove lid and use a plastic spatula

to push mixture toward blades. Replace lid and continue.

CLEANING PROCEDURE

- Clean container (cup) with liquid soap and water filling to half capacity.

- Turn on blender for some seconds.

- Turn off blender, empty the container and rinse it.

- Unplug blender clean body and external cup with a wet cloth.

- Do not use harsh detergent or chemical products for cleaning.

- Never use water jet or immerse appliance in water.

- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-

conneting to the main power outlet.

The pictures/drawings are illustrations. All data can be changed without notification.

CROYDONMAQ INDUSTRIAL LTDA.

Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: [phone]
e-mail: [e-mail] - www.croydon.com.br

INDUSTRIAL BLENDER 10 LITERS (TD10)

INDUSTRIAL BLENDER 10 LITERS (TD10)

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

37.339-3

37.033-3

37.570-3

37.063-3

37.511-3

37.154-3

37.062-3

37.335-3

37.371-3
642
635

37.058-3

37.155-3

37.158-3

37.023-3

37.370-3

37.156-3
534
332
643

9.410-3

37.355-3

37.201-3

4.109-3

37.116-3

37.312-3

4.056-3

14.033-3

3.000-3
359
604

Lid
Knife’s Nut
Knife
Retainer
Underfriction Washer
Bushing
O’Ring
Container
Base
Washer 1/4”
Nut M6
Nut
Shaft
Elastic Pin
Rubber Ring
Elastic Pin
Shaft Adapter
Screw 1/4”
Screw 1/4”
Washer 3/16”
Retainer
Flange of Coupling
Body
Bottom Cover
Switch
60HZ Motor
Container’s Base
Cord Connection
Foot
Screw 3/16”
Nut 3/16”

Item Code Description

17

18

Shaft Adapter

37.336-4

16

15

1

8

9

10

11

Container 10Lt

Assy. without socket

37.375-4

Container 10Lt

Assy.

37.335-5

Socket Assy.

37.371-4

12

5

2

5

4

6

7

3

14

13

20

31

30

22

27

23

26

Base Assembly

37.342-5

10

21

19

25

28

24

20
31

29

Power (HP)
Amperage (A)

Speed (rpm)
Capacity (l)
Weight (Kg/lbs)

Dimension WxHxD (cm/in)

7.6

½

3500
10

Voltage (V)

110 (60 Hz)

9.3/20.5
28/11.1 x 80/31.5 x 22.5/8.9

TD10-16345-700

Technical Data