IDEALI TD04, TD04-16126-700 Instruction Manual

TD04

TD04

TD04-16126-700

INSTRUCTION MANUAL

INDUSTRIAL BLENDER - TD04-16126-700

* Please read these instructions carefully before operation this appliance.

IMPORTANT SAFEGUARDS

When using electrical appliances, basics safety precautions should always be observed
including the following:

- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.

- To protect ag ainst risk of electr ical shock, do not put cord, plug, b ase or
motor in water or othe r l iquids.

- Never connect two or more appliances in the same plug.

- When not in us e, unplug t he blender.

- Avoid starting blender empty.

- Avoid contact with moving parts bec ause blades are sharp . Handle ca refully.

- Keep hands and utensils out of container while blending to prev ent the
possib ility of severe person al injury and or damage to blender. A plas tic spatula may be

used but only when blen der is "NOT RUNNING".

- Only remove the conta iner when bl ender "COMPLETELY STOPPED".

INSTRUCTIONS FOR USE

- Blender control is made by switch ( ON - OFF)

- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.

- To start blender place small quantity of food before connecting it, and afterwards complete
container.

- When blender is running do not remove the lid.

- If blender action stops, turn blender off. Remove lid and use a plastic spatula

to push mixture toward blades. Replace lid and continue.

CLEANING PROCEDURE

- Clean container (cup) with liquid soap and water filling to half capacity.

- Turn on blender for some seconds.

- Turn off blender, empty the container and rinse it.

- Unplug blender clean body and external cup with a wet cloth.

- Do not use harsh detergent or chemical products for cleaning.

- Never use water jet or immerse appliance in water.

- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-

conneting to the main power outlet.

The pictures/drawings are illustrations. All data can be changed without notification.

CROYDONMAQ INDUSTRIAL LTDA.

Estrada São Lourenço, 891 - Capivari

Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: [phone]
e-mail: [e-mail] - www.croydon.com.br

(TD04)

(TD04)

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

37.337-3

37.033-3

37.570-3

37.063-3

37.511-3

37.154-3

37.062-3

37.332-3

37.371-3
642
635

37.058-3

37.155-3

37.158-3

37.023-3

37.370-3

37.156-3
534
332
643

9.410-3

37.355-3

37.201-3

37.116-3

37.312-3

4.056-3

14.033-3

Lid
Nut

Knife

Retainer

Underfriction Washer
Bushing ( Chuck )
O’ring
Container
Base

Washer

Nut

Chuck Nutl
Shaft

Elastic pin

Polyurethane ring

Elastic pin

Shaft Adapter
Screw 1/4”
Screw 1/4”
Washer

Retainer
Flange of coupling
Body

Switch
60 HZ Motor
Container's Base
Power Cord

17

18

Shaft Adapter

37.336-4

16

15

1

8

9

10

11

37.372-4

12

5

2

5

4

6

7

3

Socket Assy.

37.371-4

14

13

4ltContainer

Assy.

37.332-5

Base Assembly

37.342-5

Wiring Diagram

2

4

1

3

MOTOR

T

WHI

E

L

B AC

K

26

25

28

Technical Data

Power (HP)
Amperage (A)

Speed (rpm)
Capacity (l)
Weight (Kg/lbs)

Dimension WxHxD (cm/in)

7.6

½

3500
4

Voltage (V)

127 (60 Hz)

8.7/19.1
25/9.9 x 62/24.5 x 21/8.3

TD04-16126-700

INDUSTRIAL BLENDER 4 LITERS

INDUSTRIAL BLENDER 4 LITERS

NG

REE

4ltContainer

Assy. without socket

Item Code

Description

20

30

31

22

27

23

26

10

29

21

19

20

30

25

28

24

29

3.000-3

Foot

30 604

Nut

31

359

Screw 3/16”

4.109-3

Bottom Cover