Page 1
™
Insulated Hand Tools
An IDEAL Combination
The IDEAL insulated tool line creates a
perfect blend of safety, comfort and precision
functionality. Each tool features double
insulated Santoprene
easy-to-grip outer surface. In addition to the
ergonomic qualities found in our tools, the
insulated coating process acts as an ‘at-aglance’ safety check. If the orange outer
coating reveals any of the inner yellow
surface, an electrician will know that this tool
needs to be replaced.
Features
n
IDEAL tools are the FIRST UL TESTED AND
LISTED insulated tools available
n
Tools are 1000 Volt certified
n
Meets ASTM F1505-01 and IEC 60 900
standards
n
Meets OSHA requirements for insulated tools
(29 CFR 1910)
®
handles with a soft,
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Volt-Guard ™Fish Tape
with non-conductive
fiberglass design
VISION. PERFORMANCE. SERVICE.
Page 2
Insulated Hand Tools
Insulated Tools
The IDEAL insulated tool line creates a perfect blend of safety, comfort and precision functionality. Each tool features double insulated Santoprene®
handles with soft, easy-to-grip outer surface. In addition to ergonomic qualities found in our tools, the insulated coating process acts as an ‘at-a-glance’
safety check. If orange outer coating reveals any of the inner yellow surface, an electrician will know that this tool needs to be replaced.
n
Meets OSHA requirements for insulated tools
Precision-ground
tips provide secure
fit for less spin-out
Tempered chrome
vanadium tool steel
blades are super
maximum quality
Molded on insulation
provides permanent
bonding
hardened for
Serrated jaws
provide secure
gripping surface
Cutting jaws and
edges are laser
hardened for
greater strength
and durability
Non-slip guard
for added safety
High carbon tool
steel for precision
durability
Permamently
bonded, double
insulated handles
for added safety
High visibility
ergonomic handles
for maximum
comfort and control
Textured
Santoprene
®
handles provide
a sure grip and
are resistant to
perspiration,
water, oil and
chemicals
I
S
F
S
I
E
A
D
L
C
U
L
®
Pliers only
Page 3
Insulated Pliers Basic Kit
Includes an assortment of the basic necessities.
Description Cat. No.
®
Premium T
8 in. Diagonal Cutting Pliers w/angled head
9-1/2 in. High-Leverage Cable Cutter
9-1/4 in. Side Cutting Linesman Pliers
10 in. Tongue and Groove Pliers
9-3/4 in. Multi-Crimp Tool
8-1/2 in. Long-Nose Pliers
-Stripper Wire Stripper
45-9120
35-9029
35-9052
30-9430
35-9430
30-9429
35-9038
Description Cat. No.
Basic Kit
Standard Kit
Includes a standard
assortment of our most
popular tools.
Insulated Screwdrivers
35-9101
Description Cat. No.
Phillips #1 x 3-3/16 in.
Phillips #2 x 4 in.
Phillips #3 x 6 in.
Square SQ #1/4 in. x 4 in.
Slotted 1/4 in. x 4 in.
Slotted 7/32 in. x 5 in.
Slotted 1/4 in. x 6 in.
Slotted 5/16 in. x 7 in.
Slotted 3/8 in. x 8 in.
9-Piece Kit
35-9193
35-9194
35-9196
35-9690
35-9150
35-9147
35-9151
35-9166
35-9168
35-9103
Insulated Nutdrivers
Description1 Cat. No.
3/16 in. x 5 in.
1/4 in. x 5 in.
5/16 in. x 5 in.
3/8 in. x 5 in.
7/16 in. x 5 in.
1/2 in. x 5 in.
9/16 in. x 5 in.
7-Piece Kit
35-9290
35-9291
35-9292
35-9294
35-9295
35-9296
35-9297
35-9104
Description Cat. No.
Standard Kit
35-9100
Journeyman Kit
Includes a comprehensive assortment of all the 1000V tools you’ll need.
Description Cat. No.
Journeyman Kit
35-9102
Page 4
Insulated Hand Tools
Volt-Guard™ Non-Conductive
Fish Tapes
The Volt-Guard™ Fish Tape
provides the safety of a fiberglass
fish tape with the superior pushing
power of a flat tape. The unique
design mimics a standard steel
tape’s rectilinear design, providing
superior column strength. The
fiberglass eyelet helps protect
against arc-flash by replacing
the typical metal eyelet; protecting
not only the user but the work
as well.
n
1000V Non-Conductive
n
Rectilinear tape stays stiff for longer runs
n
Tuff-Grip™ Fish Tape case withstands 20 ft. drop test
Description End Type Cat. No.
Volt-Guard™ Fish Tape, 60 ft. Fiberglass Eyelet
Volt-Guard™ Fish Tape, 120 ft. Fiberglass Eyelet
Volt-Guard™ Eyelet Repair Kit Fiberglass Eyelet
31-542 31-552
31-544 31-554
31-156 —
Application
The Volt-Guard is safe to use in conductive settings (we recommend you
de-energize whenever possible using IDEAL lock-out/tag-out kits). The
Volt-Guard is a piece of safety equipment. Remember, always use proper
insulated tools and safety attire when using.
Replacement
Tape Cat. No.
Fuse Pullers
n Molded on tough, high-impact
nylon for greater strength
n No-slip gripping surface and
protective finger stops for
added safety
Description
Overall
Size
Cat. No.
Small Puller for 0 to 30A/250V, 1/4 in. to 1/2 in. dia fuses 5 in. 34-015
Large Puller for 0 to 100A/250V & 0 to 60A/600V,
9/16 in. to 1 in.
7-1/4 in. 34-016
Safe-T-Grip® Fuse Pullers
n Maximum efficiency and convenience for removing
or replacing cartridge-type fuses
n Three sizes handle fuses
ranging from 0 to 600A
n Fully insulated, high-dielectric,
glass-filledpolypropylene
construction
n Notched handles provide safe, no-slip grip
n Clearly marked amperage ranges
n Exceed MIL specifications
Description
Small Puller for 250V, 9/32 in. to 1/2 in. dia. fuses 5 in. 34-001
Medium Puller for 100A/250V & 600V,
1/2 in. to 1 in. dia. fuses
Large Puller for 31 to 600A/250V & 31 to 400A/600V,
3/4 in. to 2-1/2 in. dia. fuses
Overall
Size
Cat. No.
7-1/2 in. 34-002
11-3/4 in. 34-003
Whenever possible, always de-energize lines and equipment prior
to reduce the chance of injury where the tool may make contact with an energized source.
Work around energized circuits should only be done when absolutely necessary and
only by qualified technicians. Property damage, personal injury or death may result if the
following warnings are not heeded:
• Do not use any insulated tool if the insulation cracks, breaks or becomes damaged in any
way. Destroy all dual-layer tools if the inner yellow layer shows through the orange outer
layer.
• Do not touch the uninsulated portion of an insulated tool or any conductive object when
either might contact an energized source.
• Tools must be kept clean and dry for proper insulating properties.
• Always inspect insulated tools before use.
• Use additional protection by wearing protective clothing and approved eye protection.
• Always use tools that are specifically designed for the task.
• These tools meet UL 22PP, ASTM F1505-01 and IEC 60900 standards for insulated tools.
• Always follow OSHA 1910 S and NFPA 70E safety requirements when doing electrical
work.
Form No. P-2848
©2011 IDEAL INDUSTRIES, INC.
to working on or around them. 1000V insulated tools are designed only
Visit us at www.TestEquipmentDepot.com
REGULATIONS
Testing:
• Every 1000V insulated tool we sell is individually tested to ensure no failure when
subjected to live current.
UL and VDE Certification:
Listed below are some of the tests we perform in order to pass certification:
• Tools are immersed in water for 24 hours, then tested under current for 3
minutes to ensure no current leakage or sparkover occurs.
• After being stored for 168 hours at -40° C (-40° F), tools are dropped to
ensure no damage from impact.
• After being stored for 168 hours at +70° C (158° F), a tensile load is
applied to ensure the grip is firmly bonded to the tool.
• Tools are subjected to flame for 10 seconds to ensure no flammability of
the insulating material.
OSHA Regulations:
OSHA 1910.335(a)(2)(i) When working near exposed energized conductors or circuit parts,
each employee shall use insulated tools or handling equipment if the tools or handling
equipment might make contact with such conductors or parts.
OSHA 1910.335 (a)(1)(i) Employees working in areas where there are potential electrical
hazards shall be provided with, and shall use, electrical protective equipment that is
appropriate for the specific parts of the body to be protected
and for the work to be performed.
Make sure you are in compliance by providing and using IDEAL insulated tools!
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400
Toll
Free 1-800-517-8431
Printed in U.S.A.
6/11
Loading...