Fiber Optic Products
C
Serrated Cutter (For Kevlar®))
with Breaker Notch
Stripmaster
®
Ribbon Fiber
Jacket Stripper
Simplex/Duplex 3mm
Jacket Stripper
Fiber Optic Products
C-2
Cutters/Polishing Fixtures/Strippers
Lite-Strip
™
Optical Fiber Stripper
V-notch blades strip a wide range of outer cable jacket. Precisionground, replaceable knife-type blades strip tight buffer tube
insulations (900µm). Also strips mechanically strippable coatings
from 250 microns to 900 microns.
■ Replaceable precision-ground blades cleanly strip buffer
coatings
■ New funneled hole makes cable insertion easier
■ Improved spring mounting returns handles to original position
after every application
■ One-step, 900 micron stripping hole provides broader
stripping range
■ Extra durable to withstand normal drops without requiring
tool realignment
■ New gauge color makes fiber and hole identification easier
■ Improved comfort-grip handles for an easier, more comfortable
stripping process
Fiber
Description Sizes Cat. No.
Lite-Strip™Optical 125µm,
45-350
Fiber Stripper (900µm/250µm) 140µm
Transparent Wire Stop LB-070
MiniLite-Strip
™
Optical Fiber Stripper
■ Small strip notch engineered and precision-ground to strip 900
micron or 250 micron buffer coatings from 125 micron fiber
■ Larger round strip notch machined to remove the 3mm outer jacket
■ Strip notches pre-set and locked, no field adjustment necessary
Description Cat. No.
MiniLite-Strip™ Optical Fiber Stripper 45-352
■ Two-Step process significantly
increases the life of this rugged tool
■ Superior quality high-carbon stainless
steel with molybdenum and vanadium
provides the super-hard edges needed
to stand up to the demands of today’s market
■ Textured cushioned-grip handles
■ Value-priced for contractors, cable assembly houses, fiber
installers/technicians and tool kits
Description Cat. No.
Serrated Cutter w/Breaker Notch (Patent pending) 45-344
Note: Kevlar®is a registered trademark of DuPont.
I
M
P
R
O
V
E
D
I
M
P
R
O
V
E
D
45-350
■ Designed to remove the jacket from 3mm Simplex or Duplex (zip
cord) fiber optic cable
■ Form-ground, knife-type blades for accurate easy stripping without
damaging the fiber or Kevlar®strength member
■ Contoured, comfort-grip handles to reduce operator fatigue
Description Cat. No.
Simplex/Duplex 3mm Jacket Stripper 45-349
Note: Kevlar®is a registered trademark of DuPont. ST®is a registered trademark of AT&T.
■ Removes jacket from Ribbon Fiber without
damage to the Kevlar®strength member of
the Ribbon Fiber
Note: Frame and blade-set sold separately.
Description Cat. No.
Stripmaster®Frame only L-5620
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable LB-1153
Note: Kevlar®is a registered trademark of DuPont.
L-5620
NEW
NEW
I
M
P
R
O
V
E
D
I
M
P
R
O
V
E
D
Cable Strippers
45-162
This lightweight, compact stripper is inexpensive and
simple to operate.
■ Adjustable blades can be set for any depth to help ensure
nick-free strips
■ Use with twisted-pair wire, tightly wrapped stranded cables,
CATV cable, CB antenna cable, SO, SJ, SJT, and other types of
flexible power cords
■ Includes three straight and one round blade
Description Cat. No.
Cable Stripper, 45-162
up to 1/8 in. (3.2 mm) O.D. (Gray)
Cable Stripper, 1/8 in. (3.2 mm) to 7/32 in. 45-163
(5.556 mm) O.D. (Blue)
Replacement Blade Set for 45-162,
45-163, 45-165
L-9225
Fiber Optic Products
C-3
Fiber Optic Products
Strippers/Crimp Tools/Fiber Accessories
Split-Tip Fiber Optic Swabs
Polishing Films for Fiber
Optic Connectors
■ Split-tip design cleans fiber easier
and more efficiently than other methods
■ Tube/handle is pre-loaded with 99% isopropyl alcohol
■ A single swab can be used for many cleanings or until the alcohol
is gone
Description Qty. Cat. No.
Split-Tip Fiber Optic Swabs 20/bag 45-360
■
For optimum connector
polishing results, we
recommend a three-step
procedure using 0.5µm, 3µm
and 12µm 3x6” aluminum oxide
polishing films
■ Lot-to-lot consistency in our films means repeatable connector
finishes on ceramic, stainless steel, plastic and composite ferrules
■ A single sheet will typically yield 10 to 20 connectors when using
the recommended 3-step procedure
Description Color Quantity Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide Ivory 20 films/sleeve 45-337
3.0µm, 3” x 6”, Aluminum Oxide Lt. Yellow 20 films/sleeve 45-338
12µm, 3” x 6”, Aluminum Oxide Lt. Red 20 films/sleeve 45-339
NEW
■ Three professional quality blade styles
to choose from to meet your specific
needs – Ruby, Sapphire, Carbide
■ Color-coded handles for quick,
easy identification
Red – Ruby
Blue – Sapphire
Black – Carbide
■ 30° single bevel – DualScribe™
reversible blade doubles tool life
■ Soft non-slip grip provides precise control during scribing
■ Clear safety cap protects the blades from damage when not in use
Description Handle Color Cat. No.
Ruby Blade Fiber Optic Scribe Red 45-357
Sapphire Blade Fiber Optic Scribe Blue 45-358
Carbide Blade Fiber Optic Scribe Black 45-359
NEW
Plastic Polishing
Fixture
DualScribe™ Double-Ended
Fiber Optic Scribes
NEW
NEW
■ Universal fitting accepts all ST, SC
and FC connectors with 2.5mm
ferrules
■ Economically priced
■ Grooved face for polishing efficiency
■ Precision tool used by manufacturers, contractors and
in tool kits
Description Cat. No.
Plastic Polishing Fixture 45-342
Stainless Steel Polishing Fixture for
Optical Fiber ST
®
and
SC Type Connectors
Produces polished fiber optic ST®and SC type connectors for
optimum connector performance.
■ Precision-machined, stainless-steel disk provides accurate
polishing angle for desired end face finish
■ Stainless-steel hardness maintains long life and resists
uneven wear
■ Stepped surface reduces drag and friction for easier polishing
Description Quantity Cat. No.
Polishing Fixture for Optical Fiber
1 45-341
SC/ST®Type Connectors
Note: ST®is a registered trademark of AT&T.
45-359
45-358
45-357
45-339
45-338
45-337
Fiber Optic Products
C-4
Strippers/Crimp Tools/Fiber Accessory
PremierMaster™
Crimp Tools and Die Sets
28-500
45-332
Fiber Optic Crimp Die Sets were developed to be used in
IDEAL PremierMaster™ Series Crimp Frame.
Tool Repl. Die Set
Description Cat. No. Cat. No.
PremierMaster™Crimp Tool
Frame Only
28-500 —
AT&T/ST or SMA Fiber Optic conn.
Hex 0.190 (4.83 mm), 0.090 (2.29 mm) 28-301 28-401
Round, 0.105 (2.67 mm)
Amphenol SMA Fiber Optic Conn.
Hex 0.213 (5.54 mm), 0.178 (4.52 mm)
— 28-402
Amphenol SMA Fiber Optic conn.
— 28-403
Hex 0.218 (5.54 mm), 0.151 (3.84 mm)
3M/ST Fiber Optic conn.
28-304 28-404
Hex 0.153 (3.88 mm)
Fiber Optic conn. Hex 0.151 (3.84 mm),
28-305 28-405
0.178 (4.52 mm), 0.213 (5.41 mm)
Note: PremierMaster™ Die Sets not interchangeable with Crimpmaster™ frames.
Crimpmaster
™
Fiber Optic Crimp Tools
30-489
Cat. No. 30-489 Fiber Optic Crimp Tool for SMA hex connectors.
Triple hex cavity die for crimp dimensions of .151 (3.84 mm), .178
(4.52 mm) and .213(5.41 mm).
Cat. No. 30-4910 AM P-Optimate Fiber Optic Crimp Tool for SMA
connectors. A triple cavity 360 degrees round die is incorporated
in this tool for crimp dimensions of .195 (4.95 mm), .165 (4.19
mm) and .138 (3.51 mm).
Description Cat. No.
Crimpmaster™for SMA Hex Connectors 30-489
Replacement Die Set 30-596
Crimpmaster™for SMA Connectors and AMP Optimate 30-490
Replacement Die Set for AMP-Optimate-SMA 30-597
Fiber Inspection Microscope
Description Cat. No.
Fiber Inspection Microscope 45-332
1.25mm Connector Adapter 45-334
MTRJ-Style Connector Adapter 45-335
200X Conversion Eyepiece for Singlemode Connectors 45-336
■
100X magnification for viewing multimode connectors
■ Includes 2.5mm connector “Universal Adapter” for FC, ST and SC
style connectors
■ Oblique illumination provides excellent view of ferrule cleanliness
and core condition
■ Rugged, rubberized metal housing, precision glass optics and a
built-in laser safety filter
■ White LED illumination delivers 100,000 hours bulb life
■ Soft padded carrying case included
■ Battery life 48+ hours
■ Compact size 7.5” x 1.96” x 1.18”
■ Optional 200X Conversion Eyepiece threads on for viewing finish/
polish of singlemode connectors
D
NEW
NEW
VFF5 Visual Fault Finder
Laser light source used to locate breaks, faulty splices and crimps
■ Useful over a distance of 5km (3miles)
■ Two AA batteries provide over 30 hours of continuous use
■ Slim, pocket-sized tool in rugged metal housing
■ Fitted with standard ST
®
adapter
■ Nylon carrying case with belt loop included.
Description Cat. No.
Visual Fault Finder VFF5
Note: ST®is a registered trademark of AT&T.
Loading...