I.D. AL My Music Player Quick Start Manual

I.D.AL - My Music Player - MP3 and WAV audio player - Quick Start guide

My Music Player - Quick start guide

1 - Connections

1 2 3 4 5

1 - USB Host connexion. Connect USB flash memory, USB hard disk
2 - USB Device link to connect a computer
3 - Button 1 and 2
4 - LCD display
5 - SD card memory slot
6 - Infrared sensor
7 - «DATA» encoder
8 - Power on/off

6 7 8

9 10 11 12 13 14 15

9 - Power supply input
10 - RS232 link
11 - Ethernet link
12 - Aux audio input
13 - Unbalanced audio output
14/15 - Balanced audio output

2 - SD and USB stick memory

Choose a quality flash memory card of minimum size 256MB up to 64GB - Formatted in FAT32 only
Compatible with major USB Key or SD / SDHC card

3 - Operation of the My Music Player

You need to create some folders to use the My Music Player. At
minimum, you need to place one folder at root with the name «MUSIC».
Inside this folder, place one sub-folder «MUS001». and your audio file
inside.

4 - First use

When you switch on for the first time, My Music Player ask you to
select the main media. Main Media is the main storage disk (USB stick,
SD card, HDD) where you have placed the audio files.

+MAIN MEDIA

no media

USB-EXT Select external USB connector

USB-INT Select the internal USB

SD CARD Select SD card in the front face

Click on DATA button to select the function
Turn the button to make your choice

Click the button to validate
When you have created the folders and copied the files, insert the
media in the player and switch on.

5 - Play a folder

My Music Player need 30 seconds to start. After boot, you can see a
welcome message with the name, serial number and firmware version.

My music playerMy music player

My music player

My music playerMy music player
SN:8bxx VSN:8bxx V

SN:8bxx V

SN:8bxx VSN:8bxx V

Press Data button and turn

USER USER

USER ->

USER USER
PLSPLS

//

SPSP

PLS

/

SP

PLSPLS

//

SPSP

Turn and select «1» and press the data button. You should listen the
files in the folder MUS001.

® Waves System - La Ville en Bois - 44830 BOUAYE - FRANCE - Tel : [phone] - www.id-al.com - V1610

16101610

1610

16101610

Source Source

Source ->

Source Source

T T

MUS MUS

T ->

MUS ->

T T

MUS MUS

SELECT SOURCE SELECT SOURCE

SELECT SOURCE ->

SELECT SOURCE SELECT SOURCE

001 001

001 ->

001 001

RNDRND

RND

RNDRND

MUS MUS

MUS

MUS MUS

//

/

//

6 - Use Ethernet

Connect My Music Player using Ethernet to setup date/time and some
other parameters.

If you don’t know the IP address of the player (DHCP mode as default),
you can use the name of the player.

In your browser, type the name : http://mmp-xxxx
xxxx = the serial number of your player you can see on the LCD when

switch on in stop mode.

I.D.AL - My Music Player - MP3 and WAV audio player - Quick Start guide

My Music Player - Quick start guide

Scheduler

The My Music Player can be programmed to create broadcast schedules ; to do so, use the ID-AL scheduler software.
Software and user manuals are available, in free download, from the ID-AL web site www.id-al.com.
The file created with the Scheduler software (scheduler.tm3) must be copied at root of the folder «SYSTEM»

If you use the scheduler function, you need to set up date and time in the admin page by ethernet link.

MENU

When you click on the Data button, you obtain the menu. Turn to change, click to validate.

USER

SOURCE Select the source to play

ADMIN

MAIN MEDIA Select the main media
VOLUMES/GAINS Change volumes
DATE/TIME Setup date and time
ETHERNET Ethernet configuration
AUTOPLAY Autoplay mode
Update FTP NOW Update from preset FTP server
USB DEVICE MODE Select USB Mode to update the media
FADE IN/OUT Setup Fade in/out

Configuration with Ethernet

Connect the player to the network and browse the html page using the IP address.
The default factory address is : 192.168.1.250

Firmware update

The firmware could change sometimes to offer
new features. You can donwload the new version
for free from our web site www.id-al.com
(support section)

You can also find some bugs in the first version
of this firmware.

MyMusicPlayer v.1610 is still a beta version.
This condition induces that some bugs can come

out. To correct bugs from version prior to the
current version 1610, please do the following:

1 - Download the firmware from id-al.com web
site.

2 - Copy the file at root of a USB flash memory. No
other file on the key.

3 - Insert the USB key and switch on
4 - Wait around 5 minutes. Nothing is displayed

on the LCD. BE PA TIENT !

Don’t switch off during firmware update.

When the update is finished, player ask you to
select the «main media».

For user page only :
Login : user
Password : user

For administrator and user pages :
Login : admin
Password : admin

Connect with FTP :

Login : ftp
Password : ftp
Port : 21

All parameters are set to default value.
Remove the USB key. Your player is now

operationnal.

Miscellaneous

You can download more informations from the
www.id-al.com web site (support section)

- Complete manual, Scheduler software, test

files, current firmware ....

- New firmware can be downloaded from the
web site for free. We offer more features and
correction of the bugs.

- Don’t hesitate to send your comments and the
bugs you can find. We will do our best to update
quickly.

® Waves System - La Ville en Bois - 44830 BOUAYE - FRANCE - Tel : [phone] - www.id-al.com - V1606