ICY DOCK MB974SP-2B User Manual [en, es]

English

1

Package Contents

M3*6 screws x 8User Manual x 1Device x 1

2

Front Panel Information

HDD 1

Power Button
Power / Access LED Indicator

HDD 2

Power Button
Power / Access LED Indicator

HDD 3

Power Button
Power / Access LED Indicator

HDD 4

Power Button
Power / Access LED Indicator

The LED indicator illuminates blue after the hard drive is inserted into the
drive bay. The LED will remain off if the drive bay is empty.

The LED indicator will flash blue during drive access.
The fan speed control can be switched for High, Low and Auto settings.

In High, the fan is at the maximum output, 60% of maximum in Low mode,
and in Auto mode, the fan speed will adjust according to the cooling
requirements of the drives.

The USB 3.0 and USB 3.0 port on the front of panel is made for external
device usage.ln order to make them function,please make sure to connect
the USB 3.0 and the USB 3.0 connector (for front USB 3.0 port) on the rear
to the motherboard.

The fan will turn on once a hard drive is inserted.

1

USB 3.0 Port

USB 3.0 Port

Fan Speed Control

3

Rear Panel Information

English

HDD 1

HDD 2

HDD 3

HDD 4

position of USB3.0 port
of front panel

2 Pin Fan Connector
3 Pin Fan Connector

Power Port

SATA Port

The device is equipped with a 2Pin and a 3Pin connector for the fan power.
please select the compatible one for the fan replacement.

Both power connections must be used for proper operation of the enclosure.

4

Instructions

<A> Press the release button and then pull the handle to open the front panel.

386+

38//

2

English

<B> Insert the hard drive with the SATA connectors facing towards the correct
direction. Then close the door to complete the drive installation.

<C> The USB 3.0 ports on the front panel is made for external device usage.
In order to make them function, please make sure to connect the USB 3.0
header (for front USB port) on the motherboard.

Power Supply

Motherboard

SATA Port

19 pin
USB 3.0 Port

5

Fan Replacement Information

z

To replace the fan, please make sure
the fan connector is compatible to the

2-PIN or 3-PIN connections of the device.

3