Icy Dock MB561U3S-4S R1, MB561U3S-4SB R1 User Manual
ICYCube MB561U3S-4S R1 / MB561U3S-4SB R1
User Manual
Gebrauchsanleitung
ユーザーマニュアル
說明書
说明书
Manuel d'utilisation
Manual del usuario
Quad Bay 2.5" / 3.5" SATA to USB 3.0 & eSATA External HDD Enclosure
English Page 1~8
Deutsch Page 9~16
Français Page 17~24
Español Page 25~32
日本語
Page 33~40
繁體中文
Page 41~48
简体中文
Page 49~56
01
English
1、Introduction：
3 speed fan control, including auto setting featuring Smart Cooling Technology.
Supports eSATA Hot-Swap function.
Supports sleep mode & S.M.A.R.T function.
Plug & Play USB interface, no driver needed.
Supports UASP function.
Fits four 2.5" or 3.5" SATA I/II/III HDD/SSD.
Power switch button (On/Off).
Visual LED drive activity.
Durable aluminum alloy body design.
HDD stabilizing and shock absorbing EZ-Tray design.
Easy maintenance, detachable 80mm ball bearing rear cooling fan.
Rubber padded soles for bottom scratch protection.
1、Device with 4 trays x 1
2、User manual x 1
4、AC power cord x 1
3、Power adapter x 1
5、USB 3.0 cable x 1
6、eSATA cable x 1
7、M3*4 screws for 2.5" SSD/HDD x 16
8、#6-32 screws for 3.5" HDD x 16
Package Contents
Product Features
1 2 4
5 6 7 8
3
Windows OS：Latest version of Windows XP, Windows 7,
8.1 & 10
Mac OS X 10.5 (Intel only), 10.6, 10.7, 10.8, 10.9 & 10.10
For eSATA interface: eSATA Port Multiplier is required from the host end
in order to detect all four drives.
Transfer Rate
Power Supply
Cooling Fan
Model
Interface
Support Drive Type
MB561U3S-4S R1 / MB561U3S-4SB R1
USB 3.0, USB 2.0 & eSATA
2.5" or 3.5" SATA I/II/III Hard Drive & SSD
Up to 5Gbps via USB 3.0
Up to 480Mbps via USB 2.0
Up to 6Gbps via eSATA
AC IN：100V-240V
DC OUT：12V / 6A
80*80*25mm ball bearing fan
Product Specifications
02
English
System Requirements
2、Device Information：
Mac OS
：
LED Indicators
Power On (No drive detected)
Drive Read/Write
Power On (Drive detected)
Device Activity LED Status
Flashing white LED light
No light
Solid White LED light
Aluminum Body
Rubber Pad
A
C
B
D
E
Tray eject button
LED indicator
Tray lever
Front Panel
B
E
A
D
C
03
English
Detachable cooling fan
F
Safety key lock
USB 3.0 port
Power port
eSATA port
Power switch
Fan speed controlL
G
I
H
J
K
Rear Panel
L
K
J
F
G
H
I
3、Installation Guide：
A. Push down ejection tab to release tray lever.
B. Remove the drive tray by pulling on the lever.
HDD/SSD Installation
English
04
05
English
USB 3.0 & eSATA cannot be connected at the same time. Connect only one for
proper function.
If your system cannot detect the device or hard drives, please go into device
management to search for connected device or hard drives. Please contact us
It is recommended users to "safely remove the drive in system" before powering
off the device or swapping out the drive(s).
Use the included #6-32
screws for 3.5” drives
3.5" HDD
2.5" HDD/SSD
Use the included M3*4
s
crews for 2.5” drives
C. 2.5" or 3.5" drive installation.
D. Re-insert the drive tray with the hard drive into the device.
Connect the power cord and USB 3.0 or eSATA to the specified ports on both your
system and the unit. Turn on the power switch located at the rear panel of the device.
Note:
Cable and Connections
for additional troubleshoot if it does not appear in device mangement.
English
06
A. Press the tab located below the fan
upward.
B. Detach the fan by lifting the fan
up from the tab.
Removable Fan Installation Guide
A. Slant the fan and match the hooks
to the fan mounting hole.
B. Press down the fan until it is seated
correctly with a "Click" sound.
eSATA Port
USB 3.0 Port
USB 3.0
eSATA
\ Click! /
A. Press the tab located below the fan
To Remove the Fan
To Install the Fan
07
English
Q: When using multiple drives through eSATA interface, how come the device is only
detecting one drive?
A: If the host does not support eSATA port multiplier function, the computer will not be
able to detect all drives simultaneously via single eSATA connection. You may need
to purchase an additional eSATA controller card with port multiplier function in order
to detect more than one drive. Mac systems do not offer eSATA interface, Mac users
will need to purchase an eSATA controller card to use the eSATA interface (Intel Mac
Pro only).
Q: When using USB 3.0 interface, why does removing one drive cause the remaining
drive(s) to refresh in the enclosure?
A: When multiple hard drives share a single USB interface, the USB chipset needs to
re-detect the hard drives when any drive(s) are removed from the enclosure. This
process will interrupt any working tasks of remaining drives. Please allow all active
tasks to complete prior to removing the hard drive(s).
Q: Why does the my computer not show the HDD or SSD?
A: New drives may require formatting first, please format the drives before using.
Q: Does this device support drives with capacity greater than 3TB?
A: This device supports drives with capacity greater than 3TB. When using Windows,
drive capacity more than 3TB will have to use GUID Partition Table (GPT) in order
to format 3TB or greater drives. When using 3TB or greater capacity drives, please
check if your system supports GUID Partition Table.
4、Troubleshooting Topics：
Q: Why does USB 3.0 interface only shows USB 2.0 speed?
A: Please check if it is connected to USB 3.0 port. If the MB561U3S-4S R1 /
MB561U3S-4SB R1 is connected to the USB 2.0 port, it will have USB 2.0 transfer
speed only. If your system supports
USB 3.0, please connect to the USB 3.0 port to
get the full benefit of USB 3.0 transfer speed. Transfer speed may also depend on
the hard drive speed.
5、UASP Function：
This device supports UASP function, please make sure that both your hardware
components and operation system support UASP function in order to work properly
(Min OS requirements: Windows 8 or Mac OS 8 & up).
Q: Why does the drive shows a smaller capacity than the actual drive capacity?
A: The drive and the computer system calculates the capacity differently. For example,
the drive capacity of 1GB = 1000MB, but in the system 1GB = 1024MB. If the drive
has a actual capacity of 1.2TB, the system will only show as 1.09TB.
Loading...