I.C.T.C. Holdings Corporation 300 User Manual
PISTON, HYDRAPULSE, AIR POWERED AIRLESS PAINT SPRAYERS
"Quick ChangeTMfluid section -
complete fluid section replaceable
in the field in less than 5 minutes
with just one tool.
Low maintenance cost -
unmatched fluid section
replacement cost
Equipped with Hero Uni-tool
TM
-
an all in one tool which is all you
need to replace the fluid section
Stainless steel piston and
cylinder sleeve for corrosion
resistance and longer packing life
Long wear Hytrel
TM
, and
Thiokol
TM
impregnated leather
packings
Industrial duty DC electric motor,
fan cooled, and totally enclosed
New Flip ControlTMprime valve
for positive shut off, also
serves as an emergency
pressure release
Quick Release
TM
removable
siphon assembly
SSPCTM(single set point
control) electronic pressure
control - for even spray
pattern and extremely small
spray pressure variance.
One piece intake valve with
reversible seat
Siphon tube holder to prevent
dripping during transport
Convenient spray tip holder
Power cord wrap
Ceramic piston valve ball for
reduced wear and to prevent
corrosion
Integrated stainless steel
filter manifold
Backed by the best warranty
in the business - Two year
bumper to bumper
Lifetime warranty compact
designed chromed steel cart
Lifetime warranty on gear train
and frame
Model Free Flow Output Maximum Tip Size Maximum Pressure Motor Size
EC621 .62 GPM .021 3000 PSI .8 HP ELECTRIC
EC725 .72 GPM .025 3000 PSI .9 HP ELECTRIC
Models and specifications subject to change without notice
EC Series Piston Power
Electronic Control Airless Paint Sprayers
Models EC621, EC725
For unbeatable performance and unmatched value
choose HERO EC Airless
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Quick Change
TM
Fluid Section
Unitool
TM
EC725C
Cart
EC725C
Cart
EC621S
Sled
EC725H
Highboy
SSPC
TM
Circuit
Board
SSPC
TM
Single Set Point Control
550
6000
Hi-Boy
450
"Rental tough" all metal castings
Lifetime warranty powder
coated and chrome plated
steel frames
Industrial duty, fan cooled,
fully enclosed AC electric
motor - "In this case
bigger is better"
Long wear combination
Hytrel
TM
and Thiokol
TM
impregnated leather packings
New corrosion resistant
nitrided cylinder sleeve and
piston rod
Rental ready industry proven
since 1985
Five year guarantee on
powertrain
No electronics to fail, reliable
mechanical pressure control
New improved heavy duty
T-handle prime valve offers
better priming performance
and longer life
Pneumatic tires on steel rims
Zinc plated intake siphon tube
Heavy duty filter manifold
Model Maximum Output Maximum Tip Size Maximum Pressure Motor/ Engine Size
450 .38 GPM .019 2800 PSI .50 HP Electric
500 - Hi Boy .50 GPM .021 (2 Guns .015) 2800 PSI .75 HP Electric
550 .50 GPM .021 (2 Guns .015) 2800 PSI .75 HP Electric
6000 - Hi Boy .50 GPM .021 (2 Guns .015) 2800 PSI .75 HP Electric
Flow rate established with water at 2,000 PSI (138 bar) at the tip.
One Year Full Warranty - Complete Unit
Models and specifications subject to change without notice
500
AC Series Piston Power
Airless Paint Sprayers
Models 450, 500, 550, 6000
500
Fluid Section
New corrosion
resistant nitrided
cylinder sleeve
and piston rod
•
•
•
•
•
•
•
•
•
•
•
•
"Rental proven, rental
tough" - Many
Hydrapulse
TM
units 15,
20, 25 years old and
still in service
Hydrapulse
TM
airless
means less costly
repairs since the piston
works in hydraulic oil
and not in the paint.
Repairs are easier and
less costly since two
inexpensive check balls
take most of the wear.
Industrial duty, fan
cooled, fully enclosed
AC electric motor "In this case bigger
is better"
No electronics to fail,
hydraulic pressure
control provides even
spray pattern
Zinc plated intake
siphon tube
Simple to operate and
extremely easy to
maintain
Pneumatic tires on
steel rims
Belt drive pump system
reduces pump speed
resulting in less wear,
longer pump life, and
lower amp draw
New improved heavy
duty T-handle prime
valve offers better
priming performance
and longer life
Lifetime warranty on
Hydrapulse
TM
membrane
Lifetime warranty on
powder coated steel
and chrome frame
Hydrapulse
TM
- Siphon Feed Units
Models 85SE/SEL, 330SE/SEL, 350SE, 300GSD, 1140GSD, & 300S/SL Legend
When reliability, durability and cost are important
choose "HYDRAPULSE
TM
" No other airless unit on the market compares
330SEL
350SE
350SE
85SEL
Hydrapulse
TM
Membrane
300SL
LEGEND
Model Maximum Output Maximum Tip Size Maximum Pressure Motor/ Engine Size
85SE/SEL .5 GPM .019 2500 PSI .75 HP Electric
330SES/SEL .65 GPM .023 3000 PSI 1.0 HP Electric
350SE .86 GPM .028 (2 Guns .018) 3000 PSI 1.5 HP Electric
300GSD .60 GPM .024 3000 PSI 3 hp HondaTMGas GX
1140GSD 1.0 GPM .031 (2 Guns .021) 3000 PSI 4 hp HondaTMGas GX
300S/SL LEGEND .60 GPM .023 3000 PSI 1.0 HP Electric
Flow rate established with water at 2,000 PSI (138 bar) at the tip.
Models and specifications subject to change without notice
•
•
•
•
•
•
•
•
•
•
•
1140GSD
300GSD
Loading...