ICT T-601C Owner's Manual
Readers
Dear customers,your use of the broadcasting company speaker series. We
would like to extend my heartfelt thanks to all of the Company manufactured
products have been tested before, the commitment to keep its quality. Loud speakers broadcast Pan-for hotels, commercial buildings, supermarkets,
schools, leisure and entertainment venues, is your ideal choice. For your
installation, commissioning and use of this product, the installation please
read this note.
Safety Tips
Please be sure to use the former reading detailed notes.
Really pay attention to this manual and a safety with the important warning.
Recommend that you keep this manual for future reference.
Common warning signs and security
The manual shown warning signs and security is to prevent the improper
operation due to personal injury arising from the loss of property, please
read before using this product must understand that this manual security
symbols and Warning to indicate fully aware of potential risks.
Such as the inappropriate use of staff will cause
Warning
When installed loudspeakers
Definitely will not be allowed to speakers and any exposure in the rain-wet
or water, may be inconsistent with ,or fire.
Restricted by the provisions of the speakers on the voltage, such as the
use of high voltage may cause electric shock or fire disaster. Is no pruning,
distorted, or replacement of damaged wires.
Avoid instability in the installation or set up speakers, such as shaking the
table or flat surface , the speaker can avoid falling caused personal injury
or property damage.
Speakers will be installed in support of the speaker or the weight of a solid
shelf. Speaker swap can be avoided caused personal injury or property
damage.
Wet hands must not be admitted into or plugs, may lead to electric shocks.
The allocation of plugs, make sure that pull plugs, rather than pull wires.
The use of a damaged power line of machinery may cause fire or electric
shock.
Mobile speaker, you plug the prior allocated. If the speaker and plugs may
be moving together will cause fire or electric shock.For plugs,identified as
plugs for grip.
Will not be allowed to speakers on the vent cover. May cause internal
heating caused by the fire.
Avoid speakers installed in the humidity or dust, direct contact with the sun,
from the near-electric, or smoke or steam, may cause fire or electric shock.
injury, death and property damage.
Wall Mount Speaker
Wall Mount Speaker
T-601CT-601C
T-601C
OWNER'S MANUAL
Dimension
125 mm
125 mm
m
0
7
115 m m
m
m
6
5
T-601C
Specifications
m
115 mm
8mm
Power Taps@100V
Power Taps@70V
Impedance
SPL(1W/1M)
Freq Response
Model
125 mm
Dimensions
Weight
T-601C
3W,1.5W
1.5W,0.75W
Com/3.3K /6.7K
93dB 3dB
130-16KHz
125X125X70mm
0.6Kg
Instanation
Step1 Select suitable screw dig a screw hole in the wall,the size is 8mm
Step2 Fixed the screw in the wall,connect the back hole of speaker
with the fixed screw,push the speaker slowly
Step3 Make the speaking hang well in the wall screw,finshed the
installation
Label stickers
27 mm
14 mm
100V
COM
COM
70V
1.5W
0.75W
3W
1.5W
T-601C
Loading...