Docking Station
Installation G u i d e
©2010 International Currency Technologies Corporation
V. 2.0 Part Number: AD-IDSEA02-R
International Currency Technologies Corp.
Use of Materials Limitations
International Currency Technologies Corporation (ICT) all rights reserved.
All materials contained are the copyrighted property of ICT.
All trademarks, service marks, and trade names are proprietary to ICT.
ICT reserves the right at all times to disclose or to modify any information as
ICT deems necessary to satisfy any applicable law, regulation, legal process
or governmental request, or to edit, refuse to post or to remove any information
or materials, in whole or in part, in ICT's sole discretion.
Contents
1. Specifications .......................................................1
2. Dimension ............................................................1
3. Tool Installation & Functions ................................2
4. Tool Operation......................................................8
5. Maintenance ......................................................12
www.ictgroup.com.tw
Docking Station Docking Station
1. Specifications
Operation Environment
Installation: Indoor use only!!
2. Dimension
28.10 [1.11] 62.9 [2.48]
32.8 [1.29]
Operation Temperature: 0°C~50°C
Storage Temperature: -30°C~70°C
Humidity: 30%~95%RH
(no condensation)
162.9 [6.41]
Figure.1
3. Tool Installation & Functions
1. Please install the three driver files as below before operation:
a. BDE Driver
b. USB Driver
c. Docking Station Tool
*Note: Please comfirm for the latest tool version on www.ictgroup.com.tw.
2. Connect through USB or RS232.
For USB : Connect USB connector to PC.
For RS232 : Connect USB to PC as power supply.
3 4
1 2
PIN1- +5V
PIN4- GND
3. Execute Docking Station Tool, and login. (For the first time to login,
please revise administrator password <Security/ Password>)
122.9 [4.84]
Figure.2
Figure.3
www.ictgroup.com.tw
1
15 [0.59]
33.7 [1.33]
Unit:mm [inch]
*Default:
For administrators- User ID :Admini
Password :Admini
For users- User ID :Guest
Password : Guest
2
www.ictgroup.com.tw
13 [0.51]
33.6 [1.32]
Docking Station Docking Station
4. After logging in, the account will be shown on the title bar (ex. Admin).
Functions:
a. Save File
b. COM Setup
c. Security Setup
d. Bill Box Setup (Admin Only)
e. Read Tool Version
f . Logout
a c e
b d
g
f
g. Docking Station Status
(Green as online, Grey as offline)
h. Manual Connection
i. Read Deal Records
j. Delete Single Deal Records
k. Status
h
ii
5. “Save File” : Save files as “.csv”.
6. “COM Setup” :
Setup COM 1~COM 20, and set the Reader Baud Rate as 9600.
For USB users, please make sure the USB COM port before setup.
Figure.5
7. “Security Setup” :
For administrators To setup password and authority, create and delete account.
For usersTo setup passwords.
*Note: 6 codes limited for account and password.
k
www.ictgroup.com.tw
Figure.4
j
Figure.6
3
4
www.ictgroup.com.tw
Docking Station Docking Station
8. “Bill Box Setup” (Admin Only):
For administrators to re-name the bill box.
Figure.7
9. User Definition: To read/ write the user definition data.
(15 blocks total, 16 bytes for each block).
*Note: Please make sure Docking Station is well connected first.
Functions:
a. Open definition file (.csv).
b. Save definition file (.csv).
c . Read all data (15 blocks)
from RFID.
d. Write all data (15 blocks)
to RFID.
e. Define the name by users
f. Read/ write the hexadecimal
data 0x0~0xFF.
(Ex. To write in FA instead of 0xFA).
g. Read the data of single block.
h. Write the data of single block.
I . Status
(8 degits maximum).
a c
b d
g
e
f
h
www.ictgroup.com.tw
ii
Figure.8
5
6
www.ictgroup.com.tw
Docking Station Docking Station
4. Tool Operation
10. “Tool Version”:
Read Tool Version.
11. “Logout” :
Login from another account.
12. “Docking Station Status” (LED) :
Stays Green - Standby
Flashes Green- Reading
Stays Red - Reading Error
Figure.9
1. When docking station is connected, and a bill box is installed on the
docking station, it will be detected automatically for data reading.
*Note: To prevent the data error, please do not remove bill box or
disconnect docking station when data reading.
Figure.11
Figure.10
2. To install the bill box for the first time:
(1). Name the bill box.
*Note: 16 codes limited for the name.
Figure.12
*The defined name will not be saved if users close the window.
13. “Buzzer Status” :
To rename the bill box, please re-install bill box again.
One Buzz - Reading
Two Buzzes- Reading Succeed.
www.ictgroup.com.tw www.ictgroup.com.tw
7
8
Docking Station Docking Station
3. To install the bill box from the second time on:
(2). Clear bill box data or add new data.
A. Bill Box with Data-
Select whether to clear data in bill box or not.
Clear bill box data or add new data.
A. Bill Box with Data-
Select whether to save the data again or not.
a. Click on [YES] to clear data.
Please do not remove bill box during the procedure.
Figure.13
b. Click on [NO] to add a new data.
Figure.14
B. No Data in Bill Box-
Select whether to add data in bill box or not.
a. Click on [YES] to add a new data.
Figure.15
Figure.16
b. Click on [NO] to not add any new data.
a. Click on [YES] to save the data.
Figure.18
Figure.17
b. Click on [NO] to go back to mainscreen.
B. No Data in Bill Box-
Select whether to add data in bill box or not.
a. Click on [YES] to add a new data.
Figure.19
Figure.20
b. Click on [NO] to not add any new data.
9
10
www.ictgroup.com.tw www.ictgroup.com.tw
Docking Station Docking Station Docking Station Docking Station Docking Station
Docking Station
5. Maintenance
4. Double click on deal record to read the data.
Ex. Bill box ID, dealing ammount or bill numbers.
To make sure docking station always works smoothly, please use a soft,
dry cloth or towel to clean the surface and LED regularly.
Figure.21
Figure.23
LED
The tool figures are not nessesary from the latest tool version, for
correct figures, please refer to the latest tool version issued by ICT SW.
www.ictgroup.com.tw
Click to print data.
11
Figure.22
Alcohol
Recommended
DO NOT USE
Maintenance Notice
Mild, non-abrasive, soap water.
Organic solvent , Alcohol, Volatility liquid.
12
www.ictgroup.com.tw
Taiwan
International Currency Technologies Corporation
Ji-Hong Building, No 24, Alley 38, Lane 91, Nei-hu Rd., Sec. 1, Taipei, Taiwan, R.O.C.
Tel: 886-2-2797-1238 ‧ Fax: 886-2-2797-1634
sales@ictgroup.com.tw (For Sales) ‧ rma@ictgroup.com.tw (For Customer Service)
Website: www.ictgroup.com.tw