ICT cc6000, cc6100 Installation Manual

1

2

Contents

1. General Information ................................................................................................................ 4

1.1. Features ................................................................................................................ 4

1.2. System Specifications ........................................................................................... 5

1.3. Dimensions ........................................................................................................... 7

1.4. Module Descriptions .............................................................................................. 8

2. Installation ............................................................................................................................ 10

3. Operation .............................................................................................................................. 12

3.1. EZ code overview ................................................................................................ 12

3.2. Dispensing Coins To Low Level........................................................................... 14

3.3. Operating Function Descriptions ......................................................................... 15

3.4. Setting Function Descriptions .............................................................................. 18

3.5. Executive Setting Function Descriptions ............................................................. 39

3.6. DIP Switch Setting............................................................................................... 47

4. Harness Application .............................................................................................................. 48

4.1. List of Main Wire Harness： ............................................................................... 48

4.2. List of Wire Harness for ICT Bill Acceptor： ....................................................... 48

4.3. Wire Harness Pin Assignment for JPSTD interface ............................................. 49

4.4. Wire Harness Pin Assignment for MDB interface ................................................ 53

4.5. Wire Harness Pin Assignment for Executive & MDB Interface ............................ 57

4.6. Wire Harness Pin Assignment for Download Box ................................................ 59

5. I/O Circuit.............................................................................................................................. 60

6. Maintenance ......................................................................................................................... 63

7. Troubleshooting .................................................................................................................... 65

7.1. Error Code Messages ......................................................................................... 65

7.2. Error Handling ..................................................................................................... 66

8. Firmware Download and Upgrade Instruction ....................................................................... 80

8.1. MCU STM32 Firmware Download by FP-004 ..................................................... 80

8.2. MCU STM32 Firmware Download by IrDA Special Function ........................... 83

9. PC Tool Instruction................................................................................................................ 84

9.1. Cashfloat Setting ................................................................................................. 84

9.2. Serial Number Setting ......................................................................................... 89

10. Read Audit Data ........................................................................................................... 90

10.1. Read Audit Data by ICT MTB .............................................................................. 90

10.2. Read Audit Data by IrDA ..................................................................................... 91

11. Module Assembling Procedure .................................................................................... 92

11.1. Upper Module Disassembling: ............................................................................ 92

11.2. Recognition Module Disassembling: ................................................................... 93

11.3. Coin Discharge Module Disassembling: .............................................................. 94

12. Module Exploded Views ............................................................................................... 95

3

Use of Materials Limitations

International Currency Technologies Corporation (ICT) all rights reserved.

All materials contained are the copyrighted property of ICT.

All trademarks, service marks, and trade names are proprietary to ICT.

ICT reserves the right at all times to disclose or to modify any information as
ICT deems necessary to satisfy any applicable law, regulation, legal process

or governmental request, or to edit, refuse to post or to remove any information

or materials, in whole or in part, in ICT's sole discretion.

4

1.

General Information

1.1. Features

z Six tube cassette for maximum coin inventory.
z Easy to use and suitable for vending machines world wide.
z LCM display shows current coin changer status.
z Optional portable programmer to update coin changers installed on

vending machines.

z Modular design for cheap and easy maintenance.
z Modular tubes for a variety of coin configuration.
z Adjustable acceptance rate calibration on site.

z High security through state of the art anti-fishing mechanism.

5

1.2. System Specifications

Supply Voltage MDB: 20V DC ~ 45V DC

MDB: 10V DC ~ 45V DC (Battery Mode)
JPSTD: 24V DC ±10%
Executive: 24V AC ±10%

Power Consumption Standby mode ≦ 3.6W

Coin acceptance ≦ 15.6W
Coin payout ≦ 15.6W

(36W max. when Power is turned on
initially)

Battery operation (Power Saving Type)

Sleep mode

≦

10uA

Standby mode

≦

3.6W(wake-up mode)

Temperature Range -15°C ~ +60°C
Storage Temperature -30°C ~ +70°C
Temperature Change Max. 0.2°C / minute
Relative Humidity Up to 85% (no condensation)

Serial Interface MDB (connector: Minifit 6-pin)

JPSTD

Executive (connector: Molex 15-pin & 9­pin) 1)

Peripherals MDB MDB Bill Acceptor

(for MDB & Executive interface)

MDB cashless key reader

(for Executive interface only)

ICT MTB (Multi Tool Box)

Display LCM

Menu language:

English, Русский,
Deutsch, Español, Français, Português
Italiano

1

In some models interface is selected by DIP Switch or automatically.

6

Acceptable Coin Size Coin diameter 16mm ~ 28mm
Coin Thickness 1.2mm ~ 3.2mm

Acceptance Speed Approx. 1 coin / second
Coin payout Max. 6 coin types from a tube cassette

Coin diameter and thickness for dispensing depends on tube cassette type in use

TUBE

Coin Diameter mm

A B C D E F

26.0 - 28.0

v , * v , *

－ － － －

26.0 - 26.5

V V

－ V V －

24.0 - 26.0

v , * v , *

v V v v

22.0 - 24.0

v , *

V

v v v v

20.0 - 22.0

V V

v v v v

18.0 - 20.0

V V

v v v v

16.0 - 18.0

－ －

v v v v

(* Supports Escrow Function)

Other Functions Downloadable audit - EVA-DTS by IrDA

or UART (for MDB & Executive)

Firmware Updates by IrDA (for MDB &
Executive)

MDB-FTL (only for MDB Interface)

Customer & Product Serial Number
Setting

99 coin channels

Colored diagnostic LEDs

7

1.3. Dimensions

Unit : mm

Mounting position:

Vertical, max. deviation: ± 3°

Mark of conformity: CE、FCC

8

1.4. Module Descriptions

Recognition: As shown in figure below

Coin Return Lever: After a coin is inserted, press the coin return button to return the

coin

LCM Panel: As shown in figure below

To open the LCM panel, press the latch to open.

Coin Return Lever

Hook

Latch

7 Panel
Buttons

9

Coin Tubes: Press the latch as shown below to remove the coin cassette

10

2.

Installation

 Attention!! Prior installation, please remove the coin changer from the carton

and inspect for damages.

 Attention!! Turn off VMC Power during installation – IMPORTANT!!!
 Warning!! Do not plug both MDB and Executive connector to VMC board

simultaneously!! It may cause damage of VMC board.

Device Mounting Instruction

1. Press the green hook at the left side of the
coin changer and tilt the upper module.

2. Unplug flat cable to separate upper module
from device.

3. Loosen the 3 mounting screws 2 or 3 turns.
(do not unscrew these completely)
Lift the coin changer to mount inside the vending
machine.

4. Tighten the screws and place the upper
module back to the device.

5. Plug flat cable back to upper module then
close the upper module until it has been firmly
fixed by the green hook.
Plug device power and communication cable to
vending machine.

Tube Cassette Refill Instruction

6. Press the green cassette fixed latch to pull out
the cassette at an upwardly slanted angle.

7. Refill coins into tube cassette and ensure that
the coins enter the corresponding tubes and flatly
placed. Then place the tube cassette back to
Changer.

Note! You may choose coin refill mode to refill
coins without open tube cassette. (Refer to
code 100)

11

Installation Checklist

Check that there is a 3 to 5 mm gap between the coin changer
return lever and the vending machine return mechanism.

Check that when vending machine return lever has been pressed
and released, the reject gate of the coin recognition module can
be opened and closed properly.

Check that the coin insertion, coin return box, and coin storage
box channels of the vending machine line up with the
corresponding slots of the coin changer. If the slot has not been
lined up, please adjust accordingly.

Insert a coin to check whether it can pass through the coin
changer successfully. Please ensure that there is no interference
around the coin recognition module.

Initialization Checklist

 While vending machine in an energized state, please DO NOT plug/unplug any

wires on CC6100.

Please ensure that there are no interferences between the
connected wires, the coin insert and return device, and the door
of the automatic vending machine. After the inspections are
complete, then turn on the vending machine power.

Check the amount of coins in each coin tube is above the
minimum requirement level. Please refer to sticker on the tube
cassette for minimum level information.
(The coin changer would not work correctly without enough coins
in the coin tubes.)

After refill of tube cassette, the coin changer will detect the
adequate coin quantity within a few seconds.

Dispense at least 1 coin from each coin tube to ensure that the
dispensed coins fall into the coin return box of the vending
machine.

12

3.

Operation

3.1. EZ code overview

Operating Functions

Code LCM Display Function Description

100 Refill Coin

Coin Refill Function by Coin Insertion
under Cash Float Mode

-

A

ccessible without password

-Cash Float Mode only

101 Total In/Out

Check the Total Coin PayIn and PayOut
Value Counter

-Accessible without password

115 Clear Tube Count

Clear Counting Memory of All Coin Tube
Inventory

-Accessible without password

129 Language Set language -Accessible without password

To access all menu functions requires password verification. Press “D” 3 times under main menu to open
password input page. Default Password is ABCD. See next page for complete menu functions.

Setting Functions

Code LCM Display Function Description

102 Reset Records

Clear the Total Coin PayIn and PayOut
Value Record

103 Accept/Reject Coin Switch

Set

A

ccept or Reject to Coin

Denominations

104 Tube Open/Close Switch Set Open or Close to Coin Tubes

107 Configure Cash Float

Set Cash Float Configuration for Various
Coin Denominations

-Cash Float Mode only

108 Activate Cash Float

Set Cash Float Type for Various Coin
Denominations

-Cash Float Mode only

109 Check Current Cash Float

Check Current Cash Float of Various
Coin Denominations

-Cash Float Mode only

110 Change Mgmt. Set the Change Return Mode
111 Idle Display Set the Standby LCM Display Mode
112 BA Type Setting Set the BA Interface
113 Default Setting Restore to Default Factory Settings
116 Cassette Type Coin Tube Configuration Mode -Special Function
117 Error Info Display Error Message Records

118 Bill(s) per Transaction

Set the Bill Acceptance Limitation for the
BA

-ICT BA only

119 CashFloat Mode Set Coin Tube Inventory Counting Mode
120 Set ID Set Customer & Machine Number

121 Coin->CashBox Setting

Set Coin Acceptance to Cash Box
Condition

122 Expansion Escrow Setting Set Escrow for NTD 50 -Special Function, only for NTD

123

Sensor Inventory
Adjustment

Detect Tube Inventory

-Only MDB for TWD

、

SGD

、

MYR、THB、CNY

124 Reserved Coin Set Reserved Coin Function

13

Code LCM Display Function Description

125 Accessibility options

Set LCM accessibility under door-switch
status and password security

126

Manual Inventory
Adjustment

Refill Coin Inventory function by inserting
coins into tube cassette directly

-Only MDB for TWD

、

SGD

、

MYR、THB、CNY

127 Residual Credit

Setup residual credit, price adjusted by
Changer

128 Token Learning Mode Token learning mode -For MDB & Executive

130 Reject Lever Setting Set no refund after inserting payment -For MDB & Executive

131

A

cceptance limit For

Changer

Set Credit Acceptance Limit -Only MDB for KRW

132 Maximum for Insert Q'TY

Set limitation of coins in single
transaction

-Only MDB for KRW

133 Decimal and Scaling Set Decimal point and Scaling Factor -For MDB & Executive

134 Currency Code Setting Currency Code

135 Error Report Setting Error Report Function

136 Payout Method

Setting Payout Method

（

Level 2）

Executive Setting Functions

Code LCM Display Function Description

200 Sell Mode Set Single Vend or Multi Vend -Executive only
201 Price Display Set Price Display on VMC -Executive only
202 Product Price Set Product Price Holding by Changer -Executive only

203 Price Holding Set Price Holding by Changer or VMC -Executive only

204 2nd Price for Cashless

Set 2

nd

price for cashless function on or

off

-Executive only

205 Enable Bill Acceptor Set BA enable with or without e-key -Executive only

206 Decimal Adjustment Decimal Setting -Executive only

207 Residual Credit Setup residual credit -Executive only

208

A

cceptance limit For

Changer

Set Credit Acceptance Limit -Executive only

209 Credit limit For Cashless Set Credit limit for cashless

-Executive only

210 Bill(s) per Transaction Set BA limitation per transaction -Executive only

211 Exact Change Notice Set exact change notice on display

-Executive only

212 Exchange Rate Set Exchange Rate -Executive only

14

3.2. Dispensing Coins To Low Level

Dispensing coins to low level in all coin tubes

* Press the return lever together with manual button for 3 seconds. Changer will

discharge coins until all tubes reach one under minimum level.
(If the minimum level has not been configured by the user, the default minimum coin
level would be applied.)

Dispensing coins to low level in a specific tube

* Press tube key once to dispense 1 coin from corresponding tube.

* Press the return lever together with the tube key for 3 seconds. Changer will discharge

the selected tube until it reaches one under minimum level.

15

3.3. Operating Function Descriptions

Code LCM Display Function Description Accessibility

100

Refill Coin

Coin Refill Function by Coin Insertion
under Cash Float Mode

-Accessible without password

-Cash Float Mode only

Default Definition

N/A

Enter coin refilling mode to fill up to cash float level of each coin tube.

Note! Cash float level depends on code 107 setting.(see 3-2-3)

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 100.
Press F to enter.

Positions

Require amount

Number disappears when tube
reach cash float level

LCM shows required amount of each denomination in sequence from low to
high value, as left figure position A to F.

In example of EU 6 denominations, position A to F represent denominations
of 5cent, 10cent, 20cent, 50cent, 1

€

and 2€.

Insert coins until all tubes reach cash float level.
The counter decreases when refilling coins and disappears when it reaches

cash float level.

Caution!! Please empty all coin tubes before refilling, and do not
repeatedly enter the refill mode among refilling.

Manual to exit.

- A,- B,- C

- D,- E,- F

Refill Coin

100

- 70,- 61,- 55

- 49,- 50,- 53

- 40,- 32,-

-

-

16

Code LCM Display Function Description Accessibility

101

Total In/Out

Check the Total Coin PayIn and PayOut
Value Counter

-Accessible without password

Default Definition

N/A Display current bookkeeping data.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 101.
Press F to enter.

Use B / E to switch the data below:

-Pay in amount

-Pay out amount

-Difference ( IN>OUT display “+”, OUT>IN display “-”)

Press Manual to exit.

Manual to exit.

Code LCM Display Function Description Accessibility

115

Clear Tube Count

Clear Counting Memory of All Coin Tube
Inventory

-Accessible without password

Default Definition

N/A Clear tube inventory counter’s memory.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 115.
Press F to enter.

Press F to clear memory..

Caution!! Please empty the coin tubes before clear memory. Leave
coins inside tube cassette may cause operational problem to changer.

Manual to exit.

Total In/Out
101

PayIn : $0
PayOut: $0

Difference:
$0

Clear Tube Count

Clear Tube Count
Are You Sure?

17

Code LCM Display Function Description Accessibility

129

Language Set language

-Accessible without password

Default Definition

Depends on region

User can select menu language.

-English

-Русский

-Deutsch

-Español

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 129.
Press F to enter.

LCM shows current setting.

Press B / E button to select language.
Press F to save.

Manual to exit.

English

Language
129

18

3.4. Setting Function Descriptions

Code LCM Display Function Description Accessibility

102

Reset Records

Clear the Total Coin PayIn and PayOut
Value Record

Default Definition

N/A Reset bookkeeping data.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 102.
Press F to enter.

Press F to confirm clearance of the memory.

LCM shows erased message when data has been erased successfully.

Manual to exit.

Reset Records

1

02

Reset Records
Are You Sure?

Data has been
erased

19

Code LCM Display Function Description Accessibility

103

Accept/Reject Coin Switch

Set Accept or Reject to Coin
Denominations

Default Definition

All Accept Setup changer to accept or reject to each denomination.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 103.
Press F to enter.

Use B / E to switch coin values.

LCM shows current setting of the denomination.

Press F to change the setting. (Accept / Reject)
Press Manuel to save.

Manual to exit.

Code LCM Display Function Description Accessibility

104

Tube Open/Close Switch Set Open or Close to Coin Tubes

Default Definition

All ON On/off switch for Tube A, B, C, D, E, and F.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 104.
Press F to enter.

Use B / E to switch tubes.
Press F to change tube setting. (ON / OFF)

Press Manuel to save.

Manual to exit.

EUR$0.05:Accept
"F" to Change

Accept/Reject
Coin Switch 103

Tube Open/Close
Switch 104

TUBE A ON
"F" to Change

20

Code LCM Display Function Description Accessibility

107

Configure Cash Float

Set Cash Float Configuration for Various
Coin Denominations

-Cash Float Mode only

Default Definition

Depends on region
Maximum level of each tube

Configure cash float level quantity of each coin value. Coin Changer can
save up to 3 types of cash float setting. A coin value’s maximum level

depends on the maximum level of tube multiple tube number.

Note! When coins reach defined cash float level amount, the overfloat
coins will enter changer’s cash box.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 107.
Press F to enter.

B / E to switch cash float type, A, B or C.
F to adjust selected cash float type.

LCM shows current setting.

B / E to switch coin values.
F to adjust quantity.

B / E to adjust level, +1 or -1.
A / C to adjust level, +10 or -10.
Press F to save.

Note! If LCM does not appear saved message, means the settings were
not saved, and please reconfirm and press the button F to save the
settings.

Press Manual to save the coin type configuration of all coin values. Changer

will inquire whether to apply the coin type configuration or not?

Press F to apply immediately, or D to save the type configuration only without

applying.

Manual to exit.

Configure
Cash Float 107

Float Type A

Save Changes?
D=NO, F=YES

EUR$ 0.05
Level TO CB 70

Q'TY?
70

Saved

21

Code LCM Display Function Description Accessibility

108

Activate Cash Float

Set Cash Float Type for Various Coin
Denominations

-Cash Float Mode only

Default Definition

Configure Type of cash float for various coin denominations to be activated.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 108.
Press F to enter.

Use B / E button to scroll through types. (Type A, B or C)
Press F to save.

Manual to exit.

Code LCM Display Function Description Accessibility

109

Check Current Cash Float

Check current cash float setting of
various coin denominations.

-Cash Float Mode only

Default Definition

Check current cash float setting of various coin denominations.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 109.
Press F to enter.

Press F to enter cash float information acquiring mode.
Use B / E button to scroll through each coin value's cash float configuration.
When finished, press Manual button to exit.

Manual to exit.

Float Type A

Type A
Activated

Activate
Cash Float 108

$0.05 Cash Float
070

Check Current
Cash Float 109

22

Code LCM Display Function Description Accessibility

110

Change Mgmt. Set the Change Return Mode

Default Definition

Highest Value

Setup change return by the original coin value or by the highest coin value.

Org. Coin Value: return by original inserted sequence.
Highest Value: return starting from highest coin value. When changer cannot

return by highest value, it returns by original coin value.

Note! This function only works with the JPSTD interface

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 110.
Press F to enter.

Press F to change its current setting.

(Highest Value/Original Coin Value)

When finished, press Manual button to exit.

Manual to exit.

Code LCM Display Function Description Accessibility

111

Idle Display Set the Standby LCM Display Mode

Default Definition

Coin Q’TY

Change coin changer's LCM display in standby status.

Coin Q'TY: display coins in each tube.
Total Coin Value: display total amount of vending.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 111.
Press F to enter.

Press F again to change display method.

(Coin Q'TY/Total Coin Value)

When finished, press Manual button to exit.

Manual to exit.

Highest Value
"F" to Change

Change Mgmt.
110

Coin Q'TY
"F" to Chan

g

e

Idle Display
111

23

Code LCM Display Function Description Accessibility

112

BA Type Setting Set the BA Interface

Default Definition

Select type of connected bill acceptor.
(Only work on ICT Bill Acceptor connect to Coin Changer)

Note! This is a special function. The Coin Changer must lap joint with
the ICT Bill Acceptor for this function to work.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 112.
Press F to enter.

Press F again to change BA type setting. (JPSTD/JPSTD with

escrow/MDB/MDB with escrow)

When finished, press Manual button to exit.

Manual to exit.

Code LCM Display Function Description Accessibility

113

Default Setting Restore to Default Factory Settings

Default Definition

N/A

Restore factory default setting. Example: cash float…etc.

Cash float setting will be reset to low level of each denomination.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 113.
Press F to enter.

Press F to restore factory setting mode.
Press F again to confirm of reset to factory default, changer restart
automatically. Otherwise, press Manual to cancel.

Manual to exit.

BA: JPSTD
"F" to Change

BA Type Setting
112

Are You Sure?

Default Setting

1

13

24

Code LCM Display Function Description Accessibility

116

Cassette Type Coin Tube Configuration Mode -Special Function

Default Definition

Configure the tube coin assignment without change the firmware.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 116.
Press F to enter.

Use B / E button to scroll through different selections. (Please ask your dealer

or sales for the tube assignment availability.)

Press F to confirm tube coin assignment.

Changer inquires automatically whether to set tube inventory (cash float) to
maximum amount?

Press D to remain previous cash float setting.
Otherwise, press F to change cash float setting to maximum amount of the

selected tube configuration.

Manual to exit.

Tube Type 01

Configuration
Finished

Cassette Type

1

1

6

Coin Float->Max
D=NO , F=YES

Restore
Finished

25

Code LCM Display Function Description Accessibility

117

Error Info Display Error Message Records

Default Definition

N/A

Display coin changer's last one error issue occurred during operation. Coin
Changer keeps last record of error message even after the error has been
solved.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 117.
Press F to enter.

Changer will display error message if there is any. Error message including
‘Sorting Error’, ‘TubeSensor Error’ or ‘Motor Error.’

When finished, press Manual button to exit.

Manual to exit.

Code LCM Display Function Description Accessibility

118

Bill(s) per Transaction

Set the Bill Acceptance Limitation for the
BA

-ICT BA Only

Default Definition

1

Configure limited number of bills accepted per transaction. (Only works on
ICT Bill Acceptor connect directly to the Coin Changer)
Configurable number of bill: 1 to 9

Note! This is a special function. The Coin Changer must be equipped
with the ICT Bill Acceptor for this function to work.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 118.
Press F to enter.

Use B / E button to change bill limitation number.

Note! The page below would appear after each save. If this page does
not appear, that means the settings were not saved, and please retry
setting.

When finished, press Manual button to exit.

Manual to exit.

No Error

Error Info
115

# of Bill
1 Bill(s)

Bill(s) per
Transaction 118

Configuration
Finished

26

Code LCM Display Function Description Accessibility

119

CashFloat Mode Set Coin Tube Inventory Counting Mode

Default Definition

Cashfloat Mode
Default amount is the maximum
level of each tube.

Select counting method of coin tube inventory.

Cashfloat Mode: Changer system keeps counting coin number among

tubes. Even after reboot or power reset, coin inventory data remains in
memory.

Sensor Mode: After reboot or power reset, coin changer detects coin

inventory in tubes through low level sensor and high level sensor. Changer

displays N, L or H according to coin amount:

N – Tube empty
L – Coins reach low level amount
H – Coins reach high level amount

Some operational functions are unavailable under sensor mode, including
100, 107, 108, 109 and 111.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 119.
Press F to enter.

Changer displays current inventory counting mode.

Press F to change inventory counting method.

Note! When counting method is changed to Cashfloat mode, the
cashfloat setting is changed to maximum amount automatically.

When finished, press Manual button to exit.

Manual to exit.

Cash Float
"F" to Change

CashFloat Mode
119

A=N , B=N , C=N

D

=L , E=H , F=H

27

Code LCM Display Function Description Accessibility

120

Set ID Set Customer & Machine Number

Default Definition

N/A

Configure Customer & Machine Number of Coin Changer
Configurable Range:
Customer Number contains 16 digits and each digit applies to 0 - 9.
Machine Number contains 12 digits and each digit applies to 0 - 9 or A – Z.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 120.
Press F to enter.

Use B / E button to select Customer Number or Machine Number to setup.
Press F to set the ID.

Press B / E to plus/minus number.
Press A / C to shift configured digit.
When finished, press F to save the ID.

Manual to exit.

Set ID
Machine Number

Set ID
120

Set ID
Customer Number

Machine Number
123456789012

Customer Number
1234567890123456

28

Code LCM Display Function Description Accessibility

121

Coin->CashBox Setting

Set Coin Acceptance to Cash Box
Condition

Default Definition

Same Coin Value

Setup conditions of coin acceptance to cash box.

Same Coin Value: After a coin accepted, check the accepted denomination

total in changer. When changer can return the same denomination coins in
the changer, the coin falls into cash box, otherwise it is rejected.

Total Coin Value: After a coin accepted, check total accepted value. When

changer can return the value, the accepted coin falls into cash box, otherwise
it is rejected.

Force Reveivin

g

:

Coin falls into cash box.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 121.
Press F to enter.

Changer displays current setting.

Press F to change setting. (Same Coin Value / Total Coin Value)
When finished, press Manual button to exit.

Manual to exit.

Code LCM Display Function Description Accessibility

122

Expansion Escrow Setting Set Escrow for NTD 50

This function only apply to NTD
Type Changer.

Default Definition

OFF

Setup condition of 50NTD into escrow or cash box.

Escrow ON: 50NTD coin goes into cash box when changer can return from

cassette; otherwise 50NTD coin is returned.

Escrow OFF: 1

st

and 2nd 50NTD coins go into escrow, 3rd one is returned.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 122.
Press F to enter.

Changer displays current escrow setting.

Press F to change escrow setting to ON or OFF.
When finished, press Manual button to exit.

Manual to exit.

Same Coin Value
"F" to Change

Coin->CashBox
Setting 121

Escrow ON
"F" to Change

Expansion Escrow
Setting 122

29

Code LCM Display Function Description Accessibility

123

Sensor Inventory
Adjustment

Detect Tube Inventory

-Only MDB for TWD

、

SGD

、

MYR、THB、CNY

Default Definition

N/A

Detect tube inventory and overwrite tube count data.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 123.
Press F to enter.

Press D to cancel.
Press F to read the coin inventory and save the inventory amount.

The changer displays message as left when tube count has been overwritten
successfully, then back to main configuration screen automatically.

Manual to exit.

Code LCM Display Function Description Accessibility

124

Reserved Coin Set Reserved Coin Function

Default Definition

ON

Setup reserved coin function to ON or OFF.

Reserved Coin ON: Changer will not pay out to last coin among operation,

specific number of coins will reserve inside tubes, around 4 coins. The
reserved coin number depends on different region.

Reserved Coin OFF: Changer pays out to last coin in tubes.

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 124.
Press F to enter.

Changer displays current setting.

Press F to change reserved coin setting to ON or OFF.
When finished, press Manual button to exit.

Manual to exit.

Scan Inventory?
D=NO, F=YES

Sensor Inventory
Adjustment 123

Finished

ON
"F" to Change

Reserved Coin
124

30

Code LCM Display Function Description Accessibility

125

Accessibility options

Set LCM accessibility under door-switch
status and password security

Default Definition

Door-ON
PW-ON

Setup LCM accessibility under door-switch status and setup password

security.

Door-ON: LCM inaccessible under door closing
Door-OFF: LCM accessible under door closing
PW-ON: Require password to access all LCM function
PW-OFF: Require no password to access all LCM function

LCM Descriptions

Press the Manual button.
Use A / C to scroll to EZ code 125.
Press F to enter.

Press B / E button to select setting.
Press F to save the setting.

The changer display saved message when setting has been overwritten
successfully..

Manual to exit.

Door: ON
Password: OFF

Accessibility
options 125

Saved