Integrated
Circuit
Systems, Inc.
General Description Features
A V9170-07
1
Block Diagram
AV9170-07RevB060297P
Pin Configuration
The A V9170-07 is a PLL (Phase-Locked Loop) based
frequency multiplier designed for use on Media V ision sound
boards. This clock output is 4X the input clock, it is restricted
to the output divider and the VCO range. The output frequency
range is 1 to 12.5MHz, with an input range of 0.64 to 0.768MHz
for IN and 0.256 to 3.072MHz for FBIN. By integrating the
sensitive analog sections of the PLL, such as the phase
comparator, loop filter and VCO, jitter is minimized and external
part count is reduced.
The AV9170-07 is a derivative of the AV9170 available from
Integrated Circuit Systems, Inc. For additional information
on the AV9170-07, please refer to the AV9170 Application
Note.
• Single chip clock multiplier
• On-chip Phase-Locked Loop
• Low output jitter
• 5 volt only power supply
• Low power CMOS technology
• Small 8-pin DIP or SOIC package
• On-chip loop filter
Clock Multiplier
Pin Descriptions
8-Pin DIP or SOIC J-3, J-6
PIN
NUMBER
PIN
NAME
TYPE DESCRIPTION
1 FBIN Input
FEEDBACK INPUT for
Phase-Locked Loop.
2 IN Input INPUT for reference clock.
3 GND - GROUND.
4 NC - No Connection.
5 NC - No Connection.
6 NC - No Connection.
7 VDD - Power Supply (+5V).
8 CLK Output CLOCK output.
ICS reserves the right to make changes in the device data identified in this publication
without further notice. ICS advises its customers to obtain the latest version of all
device data to verify that any information being relied upon by the customer is current
and accurate.
AV9170-07
2
Ordering Information
ICS XXXX-PPP M X#W
Lead Count & Package Width
Lead Count=1, 2 or 3 digits
W=.3” SOIC or .6” DIP; None=Standard Width
Package Type
N=DIP (Plastic)
S=SOIC
Pattern Number (2 or 3 digit number for parts with ROM code patterns)
Device Type (consists of 3 or 4 digit numbers)
Prefix
ICS=Standard Device; GSP=Genlock Device; A V=ICS (W est Coast)
AV9170-07CN08 (8 Lead Plastic DIP)
AV9170-07CS08 (8 Lead SOIC)
Example:
8 - Pin SOIC
8 - Pin DIP
ICS reserves the right to make changes in the device data identified in this publication
without further notice. ICS advises its customers to obtain the latest version of all
device data to verify that any information being relied upon by the customer is current
and accurate.