able single ended clock or crystal inputs. The single ended
clock input accepts LVCMOS or LVTTL input levels and
translate them to 3.3V LVPECL levels. The output enable is
internally synchronized to eliminate runt pulses on the outputs during asynchronous assertion/deassertion of the clock
enable pin.
Guaranteed output and part-to-part skew characteristics
make the ICS8535-11 ideal for those applications demanding well defined performance and repeatability.
The ICS8535-11 is a low skew , high performance
1-to-4 3.3V Crystal Oscillator/LVCMOS-to-3.3V
LVPECL fanout buffer and a member of the
HiPerClockS™ family of High Performance Clock
Solutions from ICS. The ICS8535-11 has select-
FEATURES
• 4 differential 3.3V LVPECL outputs
• Selectable CLK or crystal inputs
• CLK can accept the following input levels: LVCMOS, L VTTL
• Maximum output frequency up to 266MHz
• Output skew: 35ps (maximum)
• Part-to-part skew: 150ps (maximum)
• Propagation delay: 2.4ns (maximum)
• 3.3V operating supply
• 0°C to 70°C ambient operating temperature
• Industrial T emperature information available upon request
BLOCK DIAGRAMPIN ASSIGNMENT
CLK_EN
CLK
XTAL1
XTAL2
CLK_SEL
D
Q
LE
0
1
Q0
nQ0
Q1
nQ1
Q2
nQ2
Q3
nQ3
6.5mm x 4.4mm x 0.92mm Package Body
V
EE
CLK_EN
CLK_SEL
CLK
nc
XTAL1
XTAL2
nc
nc
V
CC
ICS8535-11
20-Lead TSSOP
20
1
19
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
G Package
Top View
Q0
nQ0
V
CC
Q1
nQ1
Q2
nQ2
V
CC
Q3
nQ3
8535AG-11www.icst.com/products/hiperclocks.htmlREV. B JULY 27, 2001
8535AG-11www.icst.com/products/hiperclocks.htmlREV. B JULY 27, 2001
3
Integrated
Circuit
Systems, Inc.
LOW SKEW, 1-TO-4, CRYSTAL OSCILLATOR/
ICS8535-11
LVCMOS-TO-3.3V LVPECL FANOUT BUFFER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
Inputs, V
I
Outputs, V
Package Thermal Impedance, θ
Storage T emperature, T
CCx
O
JA
STG
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings
are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in the
DC Characteristics
or
AC Characteristics
ods may affect product reliability.
4.6V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
73.2°C/W (0lfpm)
-65°C to 150°C
is not implied. Exposure to absolute maximum rating conditions for extended peri-